Details, datasheet, quote on part number: PTH08000W
PartPTH08000W
CategorySemiconductors => Power Management => Power Modules => Non-Isolated Module => Step-Down (Buck) Module
Part familyPTH08000W 2.25-A, 5/12-V Input, Non-Isolated Wide Adjust Module w/ Auto-Track
Description2.25-A, 5/12-V Input, Non-Isolated Wide Adjust Module w/ Auto-Track 6-Through-Hole Module -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSNot Compliant
SampleYes
DatasheetDownload PTH08000W datasheet
Quote
Find where to buy
 
Specifications 
Vin(Min)(V)4.5
Operating Temperature Range(C)-40 to 85
Vout(Max)(V)5.5
Vout(Min)(V)0.9
Package TypeOpen-Frame
Soft StartFixed
Regulated Outputs(#)1
Approx. Price (US$)5.72 | 1ku
FeaturesEnable,Output Discharge,Tracking
Iout(Max)(A)2.25
Vin(Max)(V)14
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
6EUSThrough-Hole ModuleR-PDSS-T56TIW TRAY 12.5718.928.253.175
Application notes
• New power modules improve surface-mount manufacturability | Doc
• High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A) | Doc
• Power Two Xilinx(TM) LX240 Virtex-6(TM) Devices
This reference design is intended to help designers wishing to use two of the new Virtex-6™ LX240 FPGA along with DDR memory and other optional circuitry in their designs. It provides nine rails of lower voltage with an input of 12 volts. The use | Doc

 

Features, Applications

2.25-A, WIDE INPUT, ADJUSTABLE SWITCHING REGULATOR WITH AUTO-TRACKTM SEQUENCING
FEATURES

to 2.25-A Output Current to 14-V Input Voltage Range Wide-Output Voltage Adjust 5.5 V) Efficiencies to 94% On/Off Inhibit Undervoltage Lockout (UVLO) Output Overcurrent Protection (Nonlatching, Auto-Reset) Overtemperature Protection Ambient Temperature Range: to 85C Surface-Mount Package Safety Agency Approvals: UL/CUL 60950, EN60950 VDE (Pending)

APPLICATIONS
DESCRIPTION

The is a highly integrated, low-cost switching regulator module that delivers A of output current. The PTH08000W sources output current at a much higher efficiency than a TO-220 linear regulator IC, eliminating the need for a heatsink. The small size (0.75 inch 0.5 inch) and flexible operation creates value for a variety of applications. The input voltage range of the 14 V, allowing operation from either or 12-V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08000W can step down to voltages as low 0.9 V from a 5-V input bus, with less than W of power dissipation. The output voltage can be adjusted to any voltage over the range, 5.5 V, using a single external resistor. This series includes Auto-TrackTM sequencing. This feature simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down. Operating features include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature protection. Target applications include telecommunications, test and measurement applications, and high-end consumer products. This product is available in both through-hole and surface-mount package options, including tape and reel. The PTH08000W is compatible with TI's roadmap for RoHS and lead-free compliance.

GND * See the Application Information section for capacitor recommendations. # See the Application Information section for RSET values.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Auto-Track, POLA, TMS320 are trademarks of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

PTH08000 (Basic Model) Output Voltage 5.5 V Part Number (2) PTH08000WAZ Add a T suffix for tape and reel option on SMD packages. S suffix versions have SnPb solder ball material. Z suffix versions have SnAgCu solder ball material. Description Horizontal T/H - Pb-free Horizontal SMD (2) Horizontal SMD Pb-free (3) Package Designator EUS EUT

over operating free-air temperature range unless otherwise noted (1)

PTH08000W TA Operating free-air temperature Lead temperature (H suffix) Solder reflow temperature (S suffix) Solder reflow temperature (Z suffix) (2) Tstg (1) (2) Storage temperature Over VI range 5 seconds Surface temperature of module body or pins Surface temperature of module body or pins 125 C UNIT C

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability Moisture Sensitivity Level (MSL) Rating Level-3-260C-168HR

MIN VI TA Input voltage Operating free-air temperature 4.5 40 MAX 14 85 UNIT V C

PTH08000W (Suffix AH, AS, and AZ) Weight Flammability Mechanical shock Mechanical vibration (1) Qualification limit. Meets UL 94 V-O Per Mil-STD-883D, Method 2002.3, 1 ms, sine, mounted Mil-STD-883D, Method 20 G

at 25C free-air temperature, IO = IOmax, 100 F (unless otherwise noted)

PARAMETER IO VI Output current Input voltage range Set-point voltage tolerance Temperature variation VO Line regulation Load regulation Total output voltage variation V(ADJ) Output Voltage Adjust Range TEST CONDITIONS = 85C, natural convection airflow Over IO range TA 85C Over VI range Over IO range Includes set-point, line, load, TA 85C Over IO range RSET 5 V RSET 3.3 V RSET 2.5 V Efficiency 2 A RSET 2 V RSET 1.8 V RSET 1.5 V RSET 1.2 V Output voltage ripple Overcurrent threshold 20-MHz bandwidth Reset, followed by autorecovery = 100 F, 1 A/s load step from to 100% IOmax Pin to GND CO CO(max) VI = increasing VI = decreasing Input high voltage (VIH) Inhibit control (pin 5) Input low voltage (VIL) Input low current (IIL) II (stby) fS Input standby current Switching frequency External input capacitance Pins 5 and 2 connected Over VI and IO ranges Electrolytic type (CI) Ceramic type (CO) External output capacitance Nonceramic type (CO) Equivalent series resistance (nonceramic) MTBF Calculated reliability Per Telcordia SR-332, 50% stress, = 40C, ground benign 10

Track input current (pin 2) Track slew rate capability Undervoltage lockout

The minimum input voltage V or (VO 1.1) V, whichever is greater. The set-point voltage tolerance is affected by the tolerance and stability of RSET. The stated limit is unconditionally met if RSET has a tolerance of 1% with 100 ppm/C or better temperature stability. This control pin has an internal pullup to the input voltage VI. it is left open-circuit, the module operates when input power is applied. A small, low-leakage 100 nA) metal-oxide semiconductor field effect transistor (MOSFET) is recommended for control. See the Application Information for further guidance. An external 100-F electrolytic capacitor is required across the input (VI and GND) for proper operation. Locate the capacitor close to the module. An external output capacitor is not required for proper operation. Adding F of distributed capacitance at the load improves the transient response. This is the calculated maximum capacitance. The minimum ESR limitation often results in a lower value. See the capacitor application information for further guidance. This is the minimum ESR for all the electrolytic (nonceramic) capacitance. Use m as the minimum when calculating the total equivalent series resistance (ESR) using the maximum ESR values specified by the capacitor manufacturer.


 

Related products with the same datasheet
PTH08000WAH
PTH08000WAS
PTH08000WAST
PTH08000WAZ
PTH08000WAZT
Some Part number from the same manufacture Texas Instruments, Inc.
PTH08000WAH 2.25-A, 5/12-V Input, Non-Isolated Wide Adjust Module w/ Auto-TrackThe PTH08000W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output current. The PTH08000W
SN75LVDT1422 14-Bit Full Duplex Serializer/Deserializer The SN75LVDT1422 Full Duplex Serializer/Deserializer incorporates a 14-bit serializer and a 14-bit deserializer. Operation of the serializer is independent
ADS5440 13 Bit 210 MSPS Analog-to-Digital Converter The ADS5440 is a 13-bit 210 MSPS analog-to-digital converter (ADC) that operates from a 5-V supply, while providing LVDS-compatible digital outputs from a 3.3-V
TPS62110 17-V, 1.5-A Synchronous Step-Down Converter The TPS6211x devices are a family of low-noise synchronous step-down dc-dc converters that are ideally suited for systems powered from a 2-cell Li-ion battery
TPS62111
TPS62112
TPS40100 Wide Input Range Synchronous Buck Controller for Sequencing The TPS40100 is a mid voltage, wide-input (between 4.5 V and 18 V), synchronous, step-down controller. The TPS40100 offers programmable closed
ADS8372 16-Bit 600-kHz Fully Diff Pseudo-Bipolar Input Micropower Sampling ADC The ADS8372 is a high performance 16-bit, 600-kHz A/D converter with fully differential, pseudo-bipolar input. The device includes
TPS23750 Integrated 100-V IEEE 802.3af PD and DC/DC Controller The TPS23750 integrates the functionality of the TPS2375 with a primary side dc/dc PWM controller. The designer can create a front-end solution for PoE-PD
TNETC460x High-Performance Single-Chip DOCSIS 2.0 Cable Modem Chip
ADS5444 13-Bit 250 MSPS Analog-to-Digital Converter The ADS5444 is a 13-bit 250 MSPS analog-to-digital converter (ADC) that operates from a 5 V supply, while providing LVDS-compatible digital outputs from a 3.3 V supply.
ADS1610 16-Bit, 10MSPS ADCThe ADS1610 is a high-speed, high-precision, deltasigma(∆) analog-to-digital converter (ADC) with 16-bitresolution operating from a +5V analog and a +3V digitalsupply.
MSP430F2013 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, 16-Bit Sigma-Delta A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
MSP430F2001 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, ComparatorThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals
MSP430F2002 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, 10-Bit SAR A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
MSP430F2003 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, 16-Bit Sigma-Delta A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices
MSP430F2011 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, ComparatorThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals
MSP430F2012 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, 10-Bit SAR A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
TPS65800 Integrated Single-Cell Lithium-Ion Battery and Power Management IC The TPS65800 is designed to provide, in a single monolithic IC, flexible charge and system power-path management for a USB-port and AC-adapter
SN65LVDS20 4-Gbps PECL to LVDS TranslatorThe SN65LVDS20 and SN65LVP20 are a high-speed differential receiver and driver connected as a repeater. The receiver accepts low-voltage positive-emitter-coupled logic (PECL)
ADS5545 14 Bits 170MSPS ADC With LVDS/CMOS Outputs The ADS5545 is a high performance 14-bit 170-MSPS ADC. Using an internal sample and hold and low jitter clock buffer this ADC supports high SNR and high SFDR

ADS1203 : Current Shunt Delta-sigma Modulator, 10MHz Clk, +/-250mV Input, 16-Bit Resolution

SN74AUC2G00YEPR : ti SN74AUC2G00, Dual 2-INPUT Positive-nand Gate

SN75LVDS88BPFD : FlatLink (LVDS for LCD) ti SN75LVDS88B, TFT Lcd-panel Timing Controller With LVDS Interface

SNJ54HC03J : ti SN54HC03, Quadruple 2-Input Positive-nand Gates With Open-drain Outputs

SN74LVC1G0832YZPR : 32-bit BUS Transceiver WITH 3-state Outputs

TPS71933-28DRVRG4 : Dual, 200ma Output, Low Noise, High PSRR Low-dropout Linear Regulators

SN74BCT541ANE4 : SCAN TEST Devices WITH Octal D-type Edge-triggered Flip-flops

SN74LVC157APWRE4 : Multiplexers ti SN74LVC157A, Quadruple 2-Line To1-Line Data Selector / Multiplexer

TPS2811PWRG4 : Pmic - Mosfet, Bridge Driver - External Switch Integrated Circuit (ics) Inverting Tape & Reel (TR) 2A 4 V ~ 14 V; IC DUAL HS MOSFET DRVR 8-TSSOP Specifications: Configuration: High-Side ; Voltage - Supply: 4 V ~ 14 V ; Current - Peak: 2A ; Delay Time: 25ns ; Package / Case: 8-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Number of Outputs: 2 ; Input Type: Inverting ; Number of Configurations: 2 ; Operating Temperature: -40

SN74HC595DBRE4 : ti SN74HC595, 8-Bit Shift Registers With 3-State Output Registers

CC256XBTBLE-KIT : CC256x Bluetooth + BLE eval mo The CC256x device is a complete BR/EDR/LE HCI solution that reduces design effort and enables fast time to market.  

UCC20225NPLT : OPTOISO 2.5KV GATE DRVR 13VLGA Texas Instruments' UCC20225 is an isolated single input, dual-channel gate driver with 4 A source and 6 A sink peak current in a space-saving 5 mm x 5 mm LGA-13 package. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5 MHz with best-in-class propagation delay and pulse-width

Same catergory

KA7815E : 3-Terminal 1A Positive Voltage Regulator. Output Current to 1A Output Voltages of 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection The KA78XXE/KA78XXAE series of three-terminal positive regulator are available in the TO-220/D-PAK package and with several fixed output voltages, making them useful in a wide range of applications. Each type.

LM237KC : ti LM237, 3-Terminal, 1.5A Adjustable Negative Voltage Regulator. Output Voltage Range Adjustable From 37 V Output Current Capability 1.5 A Max Input Regulation Typically 0.01% Per Input-Voltage Change Output Regulation Typically 0.3% Peak Output Current Constant Over Temperature Range of Regulator Ripple Rejection Typically 77 dB Direct Replacement for Industry-Standard LM237 and LM337 KC (TO-220) PACKAGE (TOP VIEW).

MA2420 : Power Ics / Powerswitching Regulators (MA Series). Storage Temperature Operating Temperature Junction Temperature Peak Input Voltage Input Current Maximum Operating Frequency Maximum Power Dissipation Dielectric Strength Insulation Resistance Fold Back Control Voltage Fold Back Control Current +,-,Fig.1 is Measurement Circuit of Peak Input Voltage Vin and Collector Cutoff Current ICEX. Pulse Width 150s.

PEN6-2405Z41 : Power/w = 5 -6 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = +/-5/12/15 ;; ISOlation = 1500V ;; Package = DIP24.

PJ2700 : Low Dropout Positive Voltage Regulators. PJ2700 Series Low Noise CMOS Positive Voltage Regulators he PJ2700 series are highly precise, low noise, ultra low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The PJ2700 consists of a current limiter circuit, a driver.

TEA1610 : TEA1610P; TEA1610T; Zero-voltage-switching Resonant Converter Controller;; Package: SOT109 (SO16), SOT38-1 (DIP16).

TPS2097D : Current Limited Switches. ti TPS2097, 0.3A, 2.7 to 5.5V Quad (4 Input/ 4 Output) High-side MOSFET Switch IC, Fault Reporting, 4 Act-lo en.

TPS75318QPWPREP : ti TPS75318-EP, Military Enhanced Plastic Fast-transient-response 1.5-A Low-dropout Voltage Regulator.

S7DB-12C1AH : NON-ISOLATED DC/DC CONVERTERS The S7DB-12C1AH is part of the low cost non-isolated DC/DC power converter series. The module uses a DIP package for ease of layout and space savings, with a low profile of 8.5mm. The output is widely trimmed from 0.9V to 2.5V, and the efficiency of 2.5V output module is typically 92% at full load. include remote sense,.

MIC69502 : The MIC69502 is a 5A, low dropout linear regulator that provides low voltage high current outputs with a minimum of external components. It offers high precision and ultra low dropout of 500mV under worst case conditions. The MIC69502 operates from an input voltage of 1.65V to 5.5V. It is designed to drive digital circuits requiring low voltage at high.

SSM3K125TU : The ever-increasing functionality of portable devices like cell phone, DSC and portable audio device is increasing their battery loading. In order to realize longer set operation, we are trying to decrease the system power consumption by lowering the internal operating voltage. Especially, lowering the voltage of the power supply and decreasing the internal.

HT48R0AA-1 : Cost-Effective I/O Type 8-Bit OTP MCU The HT48R0AA-1 is an 8-bit high performance, RISC architecture microcontroller devices specifically designed for cost-effective multiple I/O control product applications. The advantages of low power consumption, I/O flexibility, timer functions, oscillator configuration options, HALT and wake-up functions, Watchdog.

ISL8009A : 1.5A Low Quiescent Current 1.6MHz High Efficiency Synchronous Buck Regulator The ISL8009A is a high efficiency, monolithic, synchronous step-down DC/DC regulator that can deliver up to 1.5A continuous output current. It is optimized for generating low output voltages down to 0.8V. The supply voltage range of 2.7V to 5.5V, allows the use of single Li+cell,.

SG2002/A : The SG2002/A Series Low?power, Low?noise, Low?dropout deliver up to 300mA. They are the perfect choice for low voltage, low power applications. An ultra low ground current (110?A at 300mA output)makes this part attractive for battery operated power systems. The SG2002/A series also offer ultra low dropout voltage (210mV at 300mA output) to prolong battery.

MIC2601 : 1.2A, 1.2 / 2MHz Wide Input Range Integrated Switch Boost Regulator The MIC2601/2 is a 1.2MHz/2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF package. High power density is achieved with the MIC2601/2s internal 40V/1.2A switch, allowing it to power large loads in a tiny footprint..

BQ24232 : USB Friendly 0.5A Li+ Charger W/ Dynamic Power Management, 10.5V OVP The bq2423x series of devices are highly integrated Li-ion linear chargers and system power-path management devices targeted at space-limited portable applications. The devices operate from either a USB port or ac adapter and support charge currents between 25 mA and 500 mA. The high-input-voltage.

VNQ5E250AJ-E : High Side Switches Quad-channel high-side driver with analog current sense for automotive applications.

ADP2120 : 1.25A, 1.2MHz Synchronous Step-Down DC-to-DC Regulator The ADP2119/ADP2120 are low quiescent current, synchronous, step-down DC-to -DC regulators in a compact 3mm x3mm LFCSP_WD package. Both Devices use current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. Under light load condition,.

FAN4860 : 3MHz 5V TinyBoost The FAN4860 is a low-power boost regulator designed to provide a regulated 5V output from a single cell Li-Ion battery. The output voltage is fixed at 5.0V with a guaranteed maximum load current of 200mA at VIN=2.3V and 300mA at VIN=3.3V. Input current in shut-down mode is less than 1A, which maximizes battery life. Light-load PFM operation.

 
0-C     D-L     M-R     S-Z