|Category||Semiconductors => Data Converters => Analog-to-Digital Converters (ADCs) => Precision ADCs (<=10MSPS)|
|Part family||ADS1610 16-Bit, 10MSPS Delta-Sigma Analog-to-Digital Converter|
|Description||16-Bit, 10MSPS Delta-Sigma Analog-to-Digital Converter 64-HTQFP -40 to 85|
|Company||Texas Instruments, Inc.|
|Datasheet||Download ADS1610 datasheet
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
High-Speed, Wide Bandwidth ADC 10MSPS Output Data Rate 4.9MHz Signal Bandwidth 86dBFS Signal-to-Noise Ratio -94dB Total Harmonic Distortion 95dB Spurious-Free Dynamic Range On-Chip Digital Filter Simplifies Anti-Alias Requirements Multiple ADS1610sDESCRIPTION
The is a high-speed, high-precision, deltasigma analog-to-digital converter (ADC) with 16-bit resolution operating from a +5V analog and a +3V digital supply. Featuring an advanced multi-stage analog modulator combined with an on-chip digital decimation filter, the ADS1610 achieves 86dBFS signal-to-noise ratio (SNR) a 5MHz signal bandwidth. The device offers outstanding performance at these speeds with a total harmonic distortion of -94dB. The ADS1610 topology provides key system-level design advantages with respect to anti-alias filtering and clock jitter. The design of the anti-alias filter is simplified since the on-chip digital filter greatly attenuates out-of-band signals. The ADS1601s filter has a brick wall response with a very flat passband (±0.0002dB of ripple) followed immediately by a very wide stop band to 55MHz). Clock jitter becomes especially critical when digitizing high frequency, large-amplitude signals. The ADS1610 significantly reduces clock jitter sensitivity by an effective averaging of clock jitter as a result of oversampling the input signal. Output data is supplied over a parallel interface and easily connects to TMS320 digital signal processors (DSPs). The power dissipation can be adjusted with an external resistor, allowing for reduction at lower operating speeds. With its outstanding high-speed performance, the ADS1610 is well-suited for demanding applications in data acquisition, scientific instruments, test and measurement equipment, and communications. The ADS1610 is offered a TQFP-64 package and is specified from to +85°C.RBIAS VCAP DVDD PD SYNC CLK AINP AINN Parallel Interface 2xMODE RD DRDY OTR DOUT[15:0] AGND DGND
Low 3µs Group Delay Parallel Interface Directly Connects to TMS320 DSPs Out-of-Range Alert Pin Pin-Compatible with ADS1605 (5MSPS ADC)APPLICATIONS
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.
PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.
over operating free-air temperature range unless otherwise noted(1) ADS1610 AVDD to AGND DVDD to DGND AGND to DGND Input Current Input Current Analog I/O to AGND Digital I/O to DGND Maximum Junction Temperature Operating Temperature Range Storage Temperature Range +0.3 100mA, Momentary 10mA, Continuous -0.3 to AVDD -0.3 to DVDD V °C UNIT V
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Lead Temperature (soldering, °C (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com.
All specifications to +85°C, AVDD = 5V, DVDD = 3V, fCLK = 60MHz, VREF 2xMODE = low, VCM = 2.5V, and RBIAS = 18k, unless otherwise noted. ADS1610 PARAMETER Analog Input Differential input voltage (VIN) (AINP - AINN) Common-mode input voltage (VCM) (AINP + AINN)/2 Absolute input voltage (AINP or AINN with respect to AGND) Dynamic Specifications Data rate fSIG 100kHz, -2dBFS Signal-to-noise ratio (SNR) fSIG 1MHz, -2dBFS fSIG 4MHz, -2dBFS fSIG 100kHz, -2dBFS fSIG 100kHz, -6dBFS fSIG 100kHz, -20dBFS fSIG 1MHz, -2dBFS Total harmonic distortion (THD) fSIG 1MHz, -6dBFS fSIG 1MHz, -20dBFS fSIG 4MHz, -2dBFS fSIG 4MHz, -6dBFS fSIG 4MHz, -20dBFS fSIG 100kHz, -2dBFS Signal-to-noise and distortion (SINAD) fSIG 1MHz, -2dBFS fSIG 4MHz, -2dBFS fSIG 100kHz, -2dBFS fSIG 100kHz, -6dBFS fSIG 100kHz, -20dBFS fSIG 1MHz, -2dBFS Spurious-free dynamic range (SFDR) fSIG 1MHz, -6dBFS fSIG 1MHz, -20dBFS fSIG 4MHz, -2dBFS fSIG 4MHz, -6dBFS fSIG 4MHz, -20dBFS Intermodulation distortion Aperture jitter Aperture delay 4MHz, -8dBFS Excludes jitter of CLK source
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|ADS1610IPAPR 16-Bit, 10MSPS ADCThe ADS1610 is a high-speed, high-precision, deltasigma(∆Ó) analog-to-digital converter (ADC) with 16-bitresolution operating from a +5V analog and a +3V digitalsupply.|
|MSP430F2013 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, 16-Bit Sigma-Delta A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring|
|MSP430F2001 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, ComparatorThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals|
|MSP430F2002 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, 10-Bit SAR A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring|
|MSP430F2003 16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, 16-Bit Sigma-Delta A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices|
|MSP430F2011 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, ComparatorThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals|
|MSP430F2012 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, 10-Bit SAR A/D, USI for SPI/I2CThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring|
|TPS65800 Integrated Single-Cell Lithium-Ion Battery and Power Management IC The TPS65800 is designed to provide, in a single monolithic IC, flexible charge and system power-path management for a USB-port and AC-adapter|
|SN65LVDS20 4-Gbps PECL to LVDS TranslatorThe SN65LVDS20 and SN65LVP20 are a high-speed differential receiver and driver connected as a repeater. The receiver accepts low-voltage positive-emitter-coupled logic (PECL)|
|ADS5545 14 Bits 170MSPS ADC With LVDS/CMOS Outputs The ADS5545 is a high performance 14-bit 170-MSPS ADC. Using an internal sample and hold and low jitter clock buffer this ADC supports high SNR and high SFDR|
|TPS65020 Power Management IC for Li-Ion Powered SystemsThe TPS65020 is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, and which require multiple power rails. The TPS65020|
|INA159 High-Speed, Precision, Gain of 0.2 Level Translation Difference Amplifier The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network.|
|SN74LV4320A Low-Power, Dual Supply, Level Translating CompactFlash Interface With 16-Bit Data, 11-Bit AddressThis CompactFlash™ (CF) interface chip is designed to provide a single-chip solution for CF card interfaces.|
|TPS61059 Synchronous Boost Converter With Down Mode High Power White LED Driver The TPS61058/9 devices are fixed frequency, synchronous boost dc-dc converters with an inte- grated down conversion mode. The devices|
|BUF602 High Speed, Closed Loop BufferThe BUF602 is a closed-loop buffer recommended for a wide range of applications. Its wide bandwidth (1000MHz) and high slew rate (8000V/µs) make it ideal for buffering very|
|INA159 High-Speed, Precision Gain of 0.2 Level Translation Difference Amplifier The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network.|
|LMV822-Q1 Automotive Catalog Dual, Low-Voltage, RRO Operational Amplifiers The LMV821 single, LMV822 dual, and LMV824 quad devices are low-voltage (2.5 V to 5.5 V), low-power commodity operational amplifiers.|
|LP2901-Q1 Automotive Catalog Quad, Low-Power, General-Purpose Differential ComparatorNumber of Channels 4 Output Current(Min)(mA) 20 Output Type Open Collector,Open Drain VIO (25 deg C)(Max)(mV) 5 Pin/Package|
|OPA2300 Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier The OPA300 and OPA301 series high-speed, voltage-feedback, CMOS operational amplifiers are designed for 16-bit resolution systems. The OPA300/OPA301|
|OPA2301 Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational AmplifierThe OPA300 and OPA301 series high-speed, voltage-feedback, CMOS operational amplifiers are designed for 16-bit resolution systems. The OPA300/OPA301|
OPA2634U : ti OPA2634, SpeedPlus(TM) Dual, Wideband, Single-supply Operational Amplifier
TAS3103IDCP : Digital Audio Processors ti TAS3103, Digital Audio Processor
TLC4502MUB : ti TLC4502M, Advanced Linepic Self-calibrating Precision Dual Operational Amplifier
TPS71247 : Dual 250 ma Output, Ultralow Noise, High PSRR Low Dropout Linear Regulator
TMS27L08 : 1024-word BY 8-bit Erasable Programmable Read-only Memories
LM2901VQDRG4 : QUAD Differential Comparators
LM3S800-IGZ50-C2T : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 3 V ~ 3.6 V; IC ARM CORTEX MCU 64KB 48VQFN Specifications: Program Memory Size: 64KB (64K x 8) ; RAM Size: 8K x 8 ; Number of I /O: 36 ; Package / Case: 48-VFQFN Exposed Pad ; Speed: 50MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM® Cortex™-M3 ; Data Conve
DAC8831MCDREP : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Cut Tape (CT) Single Supply; IC DAC 16BIT V-OUT 14-SOIC Specifications: Data Interface: Serial ; Number of Bits: 16 ; Operating Temperature: -40°C ~ 85°C ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Packaging: Cut Tape (CT) ; Voltage Supply Source: Single Supply ; Settling Time: 1µs ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
TPS65073EVM-430 : Eval And Demo Board And Kit Programmers, Development System; EVAL MODULE FOR TPS65073-430 Specifications: Main Purpose: Power Management, Battery Charger, Power Supply ; Primary Attributes: Li-Ion Battery Charger With Power Path Management ; Secondary Attributes: I²C Interface ; Supplied Contents: Board ; Utilized IC / Part: TPS65073 ; Embedded: No ; Lead Free Status: Lead Free
TPS61253YFFT : DC/DC Switching Converters 3.5MHz Hi Eff Step- Up Converter Specifications: Manufacturer: Texas Instruments ; Product Category: DC/DC Switching Converters ; Input Voltage MAX: 5.5 V ; Switching Frequency: 3.5 MHz ; Output Voltage: 5.2 V ; Mounting Style: SMD/SMT ; Package / Case: DSBGA-9 ; Packaging: Reel ; Series: TPS61253 ; Factory Pack Quantity: 250
CC1310F64RGZT : RF Microcontrollers - MCU SimpleLink? Sub-1 GHz Ultra-Low Power Wireless Microcontroller 48-VQFN -40 to 85 Texas Instruments CC1310 SimpleLink Ultra-Low Power Wireless Microcontrollers are a cost-effective, ultra-low power sub-1GHz RF device. It combines a flexible, very low power RF transceiver with a powerful 48MHz Cortex-M3 microcontroller in a platform supporting multiple physical layers and RF st
LM5165XQDRCTQ1 : Voltage Regulators - Switching Regulators 3V-65V, 150mA Automotive Texas Instruments LM5165 Synchronous Buck Converters are a compact, easy-to-use, 3V to 65V, ultra-low IQ synchronous buck converter with high efficiency over wide input voltage and load current ranges. With integrated high-side and low-side power MOSFETs, up to 150mA of output current can be deli
5962-9688401QXA : 1a Low Dropout Regulator For 5v to 3.3v Conversion. The a 1A low dropout regulator designed to provide 3.3V from a 5V supply. The LM3940 is ideally suited for systems which contain both 5V and 3.3V logic, with prime power provided from a 5V bus. Because the is a true low dropout regulator, it can hold its 3.3V output in regulation with input voltages as low as 4.5V. The T0-220 package of the LM3940 means.
AD676 : 16-bit Parallel 100 KSPS Sampling ADC.. Autocalibrating On-Chip Sample-Hold Function Parallel Output Format 16 Bits No Missing Codes 1 LSB INL 97 dB THD 90 dB S/(N+D) 1 MHz Full Power Bandwidth VIN 15 AGND SENSE 14 VREF 16 AGND 13 INPUT BUFFERS The is a multipurpose 16-bit parallel output analog-todigital converter which utilizes a switched-capacitor/charge redistribution architecture to achieve.
ADS-951 : 18-bit, 1mhz, Low-power Sampling A/D Converter. 18-bit resolution 1MHz minimum sampling rate No missing codes over extended temperature range Very low power, 1.45 Watts Small, 32-pin, side-brazed, ceramic TDIP Edge-triggered Excellent performance Ideal for both time and frequency-domain applications Low cost FUNCTION BIT 2 BIT 1 (MSB) ANALOG GROUND ANALOG INPUT +5V REFERENCE OUT GAIN ADJUST COMPENSATION.
FMS3110 : 100MHz Triple 10-Bit Video D/A Converters. 10-bit resolution 150 megapixels per second ± 0.1% linearity error Sync and blank controls 1.0V p-p video into or 75 load Internal bandgap voltage reference Double-buffered data for low distortion TTL-compatible inputs Low glitch energy Single +5 Volt power supply FMS3110/3115 products are low-cost triple D/A converters that are tailored to fit graphics.
HI1396 : 8-Bit, 125 Msps, Flash A/D Converter. T UCT DUC ROD TE PRO at ente TITU OLE OBS LE SUBS upport C om/tsc sil.c al S SIB POS Technic ww.inter R FO act our w 8-Bit, cont -INTERS 8 1-88 The an 8-bit, ultra high speed flash analog-to-digital converter IC capable of digitizing analog signals at the maximum rate of 125 MSPS. The digital I/O levels of the converter are compatible with ECL 100K/10KH/10K.
MAX1101 : Single-Chip, 8-Bit CCD Digitizer With Clamp And 6-Bit Pga. The is a highly integrated IC designed primarily for digitizing the output of a linear CCD array. It provides the components required for all necessary analog functions, including clamp circuitry for blacklevel correction or correlated double sampling (CDS), a three-input multiplexer (mux), and an 8-bit analog-todigital converter (ADC). The MAX1101.
MSC1210Y5PAGR : MicroSystem Mixed-Signal Data Converters. ti MSC1210Y5, Precision Analog-to-digital Converter (ADC) With 8051 Microcontroller And 32k Flash Memory.
MX7542AD : CMOS P-compatible 12-bit DAC.
NJU9203B : Display Output ADC. 3.1/2 Digit Single Chip A/D Converter With Display Hold.
TDA8752 : TDA8752; Triple High Speed Analog-to-digital Converter (ADC). TDA8752 Triple high speed Analog-to-Digital Converter (ADC) Product Supersedes data of 1998 Aug 11 File under Integrated Circuits, IC02 1999 Mar 09 Triple high speed Analog-to-Digital Converter (ADC) Triple 8-bit ADC Sampling rate to 100 MHz IC controllable via a serial interface, which can be either or 3-wire, selected via a TTL input pin IC analog.
THS0842IPFB : ti THS0842, 8-Bit, 40 MSPS ADC Dual Ch. (Config.), Dual Simultaneous S&H, Low Power, Powerdown.
WM8736 : 24-bit, 96khz 6-channel DAC With Volume Control.
AD9246 : 14-Bit, 105/125 MSPS, 1.8 V A/D Converter The AD9246 is a monolithic, single 1.8 V analog supply, 14-bit, 125 MSPS analog-to-digital converter (ADC), featuring a high performance sample-and-hold amplifier (SHA) and voltage reference. The AD9246 uses a multistage differential pipelined architecture with output error correction logic to provide 14-bit.
AD7691 : The AD7691 is an 18-bit, charge redistribution, successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V and 5 V. It contains a low power, high speed, 18-bit sampling ADC with no missing codes, an internal conversion clock, and a versatile serial interface port. On the CNV rising edge,.
MAX9951 : Dual Per-Pin Parametric Measurement Units The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. The MAX9951/MAX9952 force or measure voltages.