Details, datasheet, quote on part number: 2274843-2
Part2274843-2
Category
TitleCAGE ASSEMBLY, CFP2, 1X1
Description
CompanyTE Connectivity
DatasheetDownload 2274843-2 datasheet
  
2274843-2 photo

Others parts numbering
2274845-1: CFP2 RECEPTACLE ASSEMBLY
2287076-2: CFP2 CAGE ASSEMBLY, 1X2
2274842-2: HARDWARE KIT, CFP2, 1X1,
2274842-1: HARDWARE KIT, CFP2, 1X1
2287075-2: CFP2 HARDWARE KIT, 1X2
2287075-1
2288227-2: CFP4 1X1 CAGE ASSEMBLY, PRESS-FI
2288226-1: CFP4 HARDWARE KIT
2288229-1: CFP4 RECEPTACLE
2289496-2: CFP4 1X4,CAGE ASSEMBLY
2288226-2: HARDWARE KIT,CFP4 1X1
2289497-2: CFP4 1X4,HARDWARE KITS
2289502-2: CFP4 1X4,HEATSINK CLIP
2288221-3: CFP4 EMI/DUST PLUG
2304455-1: CFP4 1X1 RECEPTACLE COVER,WITH S
2288231-3: CFP4 HEATSINK, FRONT TO BACK AIR
2288231-6: CP4 HEATSINK, FRONT TO BACK AIRF
2304456-1: CFP4 1X4,RECEPTACLE COVER,WITH S
2288219-3: CFP2 HEATSINK, SIDE TO SIDE AIRF
2304454-1: CFP2 RECEPT ASSEMBLY, 1X2
2288220-2: CFP2 HEATSINK CLIP
2288221-1: CFP2 EMI/DUST PLUG
2288218-6: HEAT SINK,FRONT TO BACK AIREFLOW
2304452-1: RECEPTACAL COVER WIHT GAKSET,CFP
2289497-1: CFP4 1X4,HARDWARE KITS

 

Features, Applications
THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION BY ALL RIGHTS RESERVED. 20
PRELIMINARY DRAWING ADD DASH NUMBER ADD PART WIHT MYLAR
MATERIAL.CAGE -0.4MM THICK NICKEL SIVLER AOOLY. EMI SPRING: COPPER ALLOY; 93.2 )

2.FINISH: EMI SPRING :1.27um NICKEL PALTING OVER ALL; 3.MATES WITH CFP MSA COMPLIANT TRANSCIVERS. 4.DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER. 5.MINIMUM PC BOARD THICKNESS: SIGLE SIDE # 0.10mm. BELLY TO BELLY APPLICATION: 3.0mm MIN. 6.PADS AND VIAS CHASSIS GROUND; 7 :REFFERENCE APPLICATION SOEC 114-32146,HOLE A, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS.

UNQUALIFIED PRODUCT CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT
CAGE ASSEMBLY,CFP2 1X1 PRESS FIT,EMI SPRING CAGE CODE DRAWING NO


UNQUALIFIED PRODUCT CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT -Y4 -PTHIS DRAWING IS A CONTROLLED DOCUMENT.

CAGE ASSEMBLY,CFP2 1X1 PRESS FIT,EMI SRPING CAGE CODE DRAWING NO

CROSS-HATCHED DENOTES COMPONENT AND TRACE KEEP-OUT AREA (EXCEPT CHASSIS GROUND) FOR NON-MAYLARTAPE APPLICATION.COMPONENTS AND TRACES ARE ONLY ALLOWED FOR APPLICATION WITH MYLAR TAPE 74.63 MAX. 2.80 MIN.

10.63 MIN. 8.50 2.20 EXPOSED PLATED AND SOLDER MASK PULLED BACK (COMPONNET AND TRACE KEEPOUT AREA)
CROSS-HATCHED DENOTES COMPONENT AND TRACE KEEP-OUT AREA (EXCEPT CHASSIS GROUND)


Some Part number from the same manufacture TE Connectivity
2274845-1
2287076-2
2274842-2
2274842-1
2287075-2
2287075-1
2288227-2
2288226-1
2288229-1
2289496-2
2288226-2
2289497-2
2289502-2
2288221-3
2304455-1
2288231-3
2288231-6
2304456-1
2288219-3
2304454-1
2288220-2
 
0-C     D-L     M-R     S-Z