Details, datasheet, quote on part number: LPC8N04FHI24E

NXP's LPC8N04 is a cost-effective MCU which serves as an entry-level connectivity solution for embedded applications with integrated NFC connectivity. The LPC8N04 MCU contains multiple features including several power-down modes and a selectable CPU frequency of up to 8 MHz for ultra-low power consumption. The peripheral complement of the LPC8N04 MCU includes 32 kB of Flash memory, 8 kB of SRAM, 4 kB of EEPROM, one I2C, one SPI/SSP, and up to 12 general purpose I/O (GPIO) pins.

CompanyNXP Semiconductors
DatasheetDownload LPC8N04FHI24E datasheet
LPC8N04FHI24E photo

Others parts numbering


Features, Applications

32-bit ARM Cortex-M0 microcontroller; 32 kB flash and 8 kB SRAM; NFC/RFID ISO 14443 type A interface

The NXP an IC optimized for an entry level Cortex-M0+ MCU with built-in NFC interface. LPC8N04 supports an effective system solution with a minimal number of external components for NFC related applications. The embedded ARM Cortex-M0+ offers flexibility to the users of this IC to implement their own dedicated solution. The LPC8N04 contains multiple features, including multiple power-down modes and a selectable CPU frequency to 8 MHz, for ultra-low power consumption. Users can program this LPC8N04 with the industry-wide standard solutions for ARM Cortex-M0+ processors.

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling electrostatic sensitive devices. Such precautions are described in the ANSI/ESD S20.20, IEC/ST JESD625-A or equivalent standards.

CAUTION Semiconductors are light sensitive. Exposure to light sources can cause the IC to malfunction. The IC must be protected against light. The protection must be applied to all sides of the IC.

System ARM Cortex-M0+ processor running at frequencies to 8 MHz ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC) ARM Serial Wire Debug (SWD) System tick timer IC reset input Memory 32 kB on-chip flash programming memory 4 kB on-chip EEPROM of which 256 byte can be write protected 8 kB SRAM Digital peripherals to 12 General Purpose Input Output (GPIO) pins with configurable pull-up/pull-down resistors and repeater mode GPIO pins which can be used as edge and level sensitive interrupt sources High-current drivers/sinks (20 mA) on four GPIO pins High-current drivers/sinks (20 mA) on two I2C-bus pins Programmable WatchDog Timer (WDT) Analog peripherals Temperature sensor with 1.5 C absolute temperature accuracy between 40 C and +85 C Communication interfaces NFC/RFID ISO 14443 type A interface I2C-bus interface supporting full I2C-bus specification and fast mode with a data rate of 400 kbit/s, with multiple address recognition and monitor mode Energy harvesting functionality to power the LPC8N04. Clock generation 8 MHz internal RC oscillator, trimmed 2 % accuracy, which is used for the system clock Timer oscillator operating at 32 kHz linked to the RTC timer unit Power control Support for 3.6 V external voltages The LPC8N04 can also be powered from the NFC field Activation via NFC possible Integrated Power Management Unit (PMU) for versatile control of power consumption Four reduced power modes for ARM Cortex-M0+: sleep, deep sleep, deep power-down and battery off Power gating for each analog peripheral for ultra-low power operation nA IC current consumption in battery off mode 3.0 V Power-On Reset (POR) Unique device serial number for identification

All information provided in this document is subject to legal disclaimers.

Configurable LED strip/christmas tree LEDs via NFC Smart toy/interactive robot data logger Buttonless/contactless control panel Contactless diagnostic NFC e-locker Smart manufacturing NFC OTA

Table 1. Ordering information Package Name LPC8N04FHI24 HVQFN24 Description plastic thermal enhanced very thin quad flat package; no leads; 24 terminals; body 0.85 mm Version SOT616-3 Type number

Table 2. LPC8N04 Marking codes Marking code LPC8N04 Type number


Some Part number from the same manufacture NXP Semiconductors

NXP's LPC8N04 is a cost-effective MCU which serves as an entry-level connectivity solution for embedded applications with integrated NFC connectivity. The LPC8N04 MCU contains multiple features including


SC16IS740IPW,128 : UART Interface IC I2C/SPI-SLAVEBRIDGE Specifications: Manufacturer: NXP ; Product Category: UART Interface IC ; RoHS:  Details ; Number of Channels: 1 ; Data Rate: 5 Mbps ; Supply Voltage (Max): 3.6 V ; Supply Voltage (Min): 2.3 V ; Supply Current: 6 mA ; Maximum Operating Temperature: + 85 C ; Minimum Operating Temperature: - 40 C

P87C58X2FA,512 : Embedded - Microcontroller Integrated Circuit (ics) Internal Tube 2.7 V ~ 5.5 V; IC 80C51 MCU 256 RAM 44PLCC Specifications: Program Memory Size: 32KB (32K x 8) ; RAM Size: 256 x 8 ; Number of I /O: 32 ; Package / Case: 44-LCC (J-Lead) ; Speed: 33MHz ; Oscillator Type: Internal ; Packaging: Tube ; Program Memory Type: OTP ; EEPROM Size: - ; Core Processor: 8051 ; Data Converters: - ; Core Size: 8-Bit ; Ope

74LVT16240ADGG,118 : Logic - Gate And Inverter Integrated Circuit (ics) Inverter Tape & Reel (TR) 32mA, 32mA 2.7 V ~ 3.6 V; IC BUFF DVR TRI-ST 16BIT 48TSSOP Specifications: Number of Circuits: 4 ; Package / Case: 48-TFSOP (0.240", 6.10mm Width) ; Logic Type: Inverter ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Inputs: 4 ; Current - Output High, Low: 32mA, 32mA ; Operating Temperature: -40°C ~ 85°C ; Voltage - Supply: 2.7

TEA6324T/V1,518 : Linear - Audio Processing Integrated Circuit (ics) Surface Mount Tape & Reel (TR); IC SOUND CNTRL I2C 24-SOIC Specifications: Mounting Type: Surface Mount ; Package / Case: 24-SOIC (0.295", 7.50mm Width) ; Type: Stereo Audio Volume Control ; Packaging: Tape & Reel (TR) ; Applications: Automotive Audio ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant


P89C51RC2FP : 8-BIT, FLASH, 33 MHz, MICROCONTROLLER, PDIP40 Specifications: Data Bus: 8 Bit ; Life Cycle Stage: ACTIVE ; Clock Speed: 33 MHz ; ROM Type: Flash ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 32 ; Package Type: CDIP, Other, 0.600 INCH, PLASTIC, DIP-40 ; Operating Range: Commercial ; Pin Count: 40 ; Operating Temperature: 0 to 70 C (32 to 158 F

74AUP1G158GW : AUP/ULP/V SERIES, 3-INPUT AND GATE, PDSO6 Specifications: Gate Type: AND ; Supply Voltage: 1.1 ; Logic Family: CMOS ; Inputs: 3 ; Propagation Delay: 18.3 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 6 ; IC Package Type: Other, 0.90 X 1 MM, 0.35 MM HEIGHT, SOT-1115, SON-6

74AXP1T125GNH : IC TRANSLATOR UNIDIR 3ST 6XSON NXP's AXP family of Si-gate CMOS devices uses leading low threshold process technology and next generation packaging technology to create extremely small functions that support the trend to very low operating voltage and consume very little power. The AXP translators are level translating gates t

LPC1700 : Scalable Mainstream Microcontrollers (MCUs) based on ARM® Cortex®-M3 Cores The LPC1700 series are Cortex-M3 based MCUs with solid mid-range performance and power efficiency and able to support multiple high-bandwidth data streams running simultaneously from peripherals such as Ethernet, USB (host or device), CAN, and LCD display. Operating at speeds up to 120MHz, they have

0-C     D-L     M-R     S-Z