Details, datasheet, quote on part number: NMC27C64N200
PartNMC27C64N200
Category
DescriptionIc-64k CMOS OTP Prom
CompanyN.A.
DatasheetDownload NMC27C64N200 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The 64K UV erasable, electrically reprogrammable and one-time programmable (OTP) CMOS EPROM ideally suited for applications where fast turnaround, pattern experimentation and low power consumption are important requirements. The NMC27C64 is designed to operate with a single +5V power supply with 10% tolerance. The CMOS design allows the part to operate over extended and military temperature ranges. The NMC27C64Q is packaged a 28-pin dual-in-line package with a quartz window. The quartz window allows the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written electrically into the device by following the programming procedure. The NMC27C64N is packaged a 28-pin dual-in-line plastic molded package without a transparent lid. This part is ideally suited for high volume production applications where cost is an important factor and programming only needs to be done once. This family of EPROMs are fabricated with Fairchild's proprietary, time proven CMOS double-poly silicon gate technology which combines high performance and high density with low power consumption and excellent reliability.

Features

s High performance CMOS 150 ns access time s JEDEC standard pin configuration 28-pin Plastic DIP package 28-pin CERDIP package s Drop-in replacement for 2764 s Manufacturers identification code

Output Enable, Chip Enable, and Program Logic
Socket compatible EPROM pin configurations are shown in the blocks adjacent to the NMC27C64 pins.

O0 O7 PGM NC VPP VCC GND Addresses Chip Enable Output Enable Outputs Program No Connect Programming Voltage Power Supply Ground

Temperature Under Bias Storage Temperature All Input Voltages except A9 with Respect to Ground (Note to -0.6V

Power Dissipation Lead Temperature (Soldering, 10 sec.) ESD Rating (Mil Spec 883C, Method 3015.2)

All Output Voltages with Respect to Ground (Note +1.0V to GND -0.6V VPP Supply Voltage and A9 with Respect to Ground During Programming VCC Supply Voltage with Respect to Ground

Input Load Current Output Leakage Current VCC Current (Active) TTL Inputs VCC Current (Active) CMOS Inputs VCC Current (Standby) TTL Inputs VCC Current (Standby) CMOS Inputs VPP Load Current Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Output Low Voltage Output High Voltage

VIN = VCC or GND VOUT = VCC or GND, CE = VIH CE = VIL ,f=5 MHz Inputs = VIH or VIL, I/O CE = GND, = 5 MHz Inputs = VCC or GND, I/O CE = VIH CE = VCC VPP = VCC

NMC27C64 Symbol tACC tCE tOE tDF tCF tOH Parameter Address to Output Delay CE to Output Delay OE to Output Delay OE High to Output Float CE High to Output Float Output Hold from Addresses, OE , Whichever Occurred First Conditions Min OE = VIL PGM = VIH OE = VIL, PGM = VIH CE = VIL, PGM = VIH CE = VIL, PGM = VIH OE = VIL, PGM = VIH OE = VIL PGM = VIH Max E200 Min Max Units ns


 

Related products with the same datasheet
NMC27C64Q150
NMC27C64Q200
Some Part number from the same manufacture
NMC27C64Q150 Ic-64k CMOS OTP Prom
NMC9306
NMC9307
NMC9313
NMC9313B
NMC9314B
NMC9345
NMC9346
NMC93C46
NMC93S46
NME0512M
NMH0505D DC/DC Converter 2w D.i.l
NMJ0505S DC/DC Converter 1w 2 O/p
NML0505S DC/DC Converter 2w 1 O/p
NMRV-40-40-9/12063A4 Motor Geared 35rpm
 
0-C     D-L     M-R     S-Z