Details, datasheet, quote on part number: TS3V914AI
PartTS3V914AI
Category
Description
CompanyN.A.
DatasheetDownload TS3V914AI datasheet
  

 

Features, Applications
3V RAIL TO RAIL CMOS QUAD OPERATIONAL AMPLIFIER

DEDICATED TO 3.3V APPLICATIONS AND BATTERY-SUPPLIED (fully specified at VCC = 3V and 5V) RAIL TO RAIL INPUT AND OUTPUT VOLTAGE RANGES SINGLE (OR DUAL) SUPPLY OPERATION FROM TO 16V EXTREMELY LOW INPUT BIAS CURRENT : 1pA TYP LOW INPUT OFFSET VOLTAGE : 5mV max. SPECIFIED FOR 600 AND 100 LOADS LOW SUPPLY CURRENT : 200A/Ampli SPICE MACROMODEL INCLUDED IN THIS SPECIFICATION

DESCRIPTION The is a RAIL TO RAIL quad CMOS operational amplifier designed to operate with a single 3V supply voltage. The input voltage range Vicm includes the two supply rails VCC+ and VCC-. The output reaches VCC- +50mV VCC+ -50mV with = 10k VCC- +350mV VCC+ -350mV with = 600 This product offers a broad supply voltage operating range from to 16V and a supply current of only 200A/amp. (VCC = 3V). Source and sink output current capability is typically 40mA (at VCC = 3V), fixed by an internal limitation circuit. SGS-THOMSON is offering a dual op-amp with the same features : TS3V912.

Output 1 Inverting Input 1 Non-inve rtin g Input CC + Non-inve rting Input 2 Invert ing Input 2 Output 2

Output 4 Invertin g Input 4 Non-inve rtin g Input 4 VCC Non-inve rtin g Input 3 Invertin g Input 3 Output 3

Parameter Supply Voltage - (note 1) Differential Input Voltage - (note 2) Input Voltage - (note 3) Current on Inputs Current on Outputs Operating Free Air Temperature RangeI Storage Temperature

1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of input and output voltages must never exceed VCC+ +0.3V.

Symbol VCC Vicm Supply Voltage Common Mode Input Voltage Range

ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC (unless otherwise specified)

Symbol Vio Parameter Input Offset Voltage = VCC/2) Tmin. Tamb Tmax. DVio Iio Iib ICC CMR SVR Avd VOH TS3V914 TS3V914A Min. TS3V914I/AI Typ. Max. Unit mV

Input Offset Voltage Drift Input Offset Current - (note 1) Tmin. Tamb Tmax. Input Bias Current - (note 1) Tmin. Tamb Tmax. Supply Current (per amplifier, AVCL 1, no load) Tmin. Tamb Tmax. Common Mode Rejection Ratio Vic = 1.5V Supply Voltage Rejection Ratio (VCC+ VO = VCC /2) Large Signal Voltage Gain (RL to 1.8V) Tmin. Tamb Tmax. High Level Output Voltage = 100 Tmin. Tamb Tmax. 600 - Source (Vo = VCC ) + Sink (Vo = VCC )

Tmin. Tamb Tmax. Io GBP SR+ SRm en VO1/VO2 Output Short Circuit Current (Vid = 1V)

Gain Bandwidth Product (AVCL = 100kHz) Positive Slew Rate AVCL = 100pF Negative Slew Rate Phase Margin Equivalent Input Noise Voltage (Rs = 1kHz) Channel Separation = 1kHz)

Note 1 : Maximum values including unavoidable inaccuracies of the industrial test.

 

Related products with the same datasheet
TS3V914A
TS3V914I
Some Part number from the same manufacture
TS3V914I
TS3V914IN Ic-quad Rail/rail Amp
TS3V94
TS420-B
TS59C11
TS600R Glass Passivated Junction Fast Switching Rectifier
TS68230CP8 Ic-interface Timer
TS7514
TS7514CFN
TS80C31X2-LCB Ic-sm-8-bit CMOS Cpu
TS80C31X2-MIA Ic-8 Bit CMOS Cpu
TS80C32X2-LCA Ic-8-bit CMOS Cpu
TS820-B
TS900 Timer Motor Driven 24 HR
TS902A
TS951IN Ic-rail/rail op Amp
TS971C
TSA552X
TSB000 Trigger Spray Bottle Empty
TSB11LV01PT-TEB
TSB12LV12PGE
 
0-C     D-L     M-R     S-Z