Details, datasheet, quote on part number: AM7996DC
CategoryInterface and Interconnect
DescriptionIeee 802.3/ethernet/cheapernet Transceiver
CompanyAdvanced Micro Devices, Inc.
DatasheetDownload AM7996DC datasheet
Find where to buy


Features, Applications

s Compatible with Ethernet Version 2 and IEEE 10BASE-5 and10BASE-2 specifications s Pin-selectable SQE Test (heartbeat) option s Internal jabber controller prevents excessive transmission time s Noise rejection filter ensures that only valid data is transmitted onto the network s Collision detection on both transmit and receive data s Collision detect threshold levels adjustable for other networking applications

The Am7996 IEEE 802.3/Ethernet/Cheapernet Transceiver suppor ts Ethernet Version 2, IEEE 802.3 10BASE-5 and IEEE 802.3 10BASE-2--Cheapernet) transceiver applications. Transmit, receive, and collision detect functions at the coaxial media interface to the data terminal equipment (DTE) are all performed by this single device. In an IEEE 802.3 (10BASE-5)/Ethernet application, the Am7996 interfaces the coaxial (0.4 diameter) media to the DTE through an isolating pulse transformer and the 78 attachment unit interface (AUI) cable. In IEEE 802.3 10BASE-2--Cheapernet applications, the Am7996 typically resides inside the DTE with its signals to the DTE isolated and the coaxial (0.2 diameter) media directly connected to the DTE. Transceiver power and ground in both applications are isolated from that of the DTE. The Am7996's tap driver provides controlled skew and current drive for data signaling onto the media. The jabber controller prevents the node from transmitting excessively. While transmitting, collisions on the media are detected if one or more additional stations are transmitting. The Am7996 features an optional SQE Test function that provides a signal on the Cl pair at the end of every transmission. The SQE Test indicates the operational status of the Cl pair to the DTE. It can also serve as an acknowledgment to the node that packet transmission onto the coax was completed.

Carrier Detect Circuit DI+ DI­ Line Driver Control Logic Receive Data Amplifier Collision Detect Circuit Line Driver Control Logic Jabber Timer SQE Test Generator Input Buffer

Part No. Am79C970 Am79C974 Description Twisted Pair Ethernet Transceiver (TPEX) Twisted Pair Ethernet Transceiver Plus (TPEX+) Integrated Multiport Repeater PlusTM (IMR+TM) Hardware Implemented Management Information BaseTM (HIMIBTM) Media Access Controller for Ethernet (MACETM) CMOS Local Area Network Controller for Ethernet (C-LANCE) Integrated Local Area Communications ControllerTM (ILACCTM) PCnet-ISA Single-Chip Ethernet Controller (for ISA bus) PCnet-ISA+ Single-Chip Ethernet Controller (with Microsoft® Plug n' Play® Support) PCnet-32 Single-Chip 32-Bit Ethernet Controller (for 386DX, 486 and VL buses) PCnet-PCI Single-Chip Ethernet Controller (for PCI bus) PCnet-SCSI Combination Ethernet and SCSI Controller for PCI Systems


AMD standard products are available in several packages and operating ranges. The order number (valid combination) is formed by a combination of the elements below.

OPTIONAL PROCESSING Blank = Standard Processing B = Burn-In TR = Tape and Reel Packaging

PACKAGE TYPE = 20-Pin Plastic DIP (PD = 20-Pin Ceramic DIP (CD = 20-Pin Plastic Leaded Chip Carrier (PL 020) SPEED Not Applicable DEVICE NUMBER/DESCRIPTION Am7996 IEEE 802.3/Ethernet/Cheapernet Transceiver

Valid Combinations Valid combinations list configurations planned to be supported in volume for this device. Consult the local AMD sales office to confirm availability of specific valid combinations and to check on newly released combinations.


Related products with the same datasheet
Some Part number from the same manufacture Advanced Micro Devices, Inc.
AM7996DCB Ieee 802.3/ethernet/cheapernet Transceiver
AM79C100JC Twisted-paIR Ethernet Transceiver Plus ( Tpex Plus )
AM79C30A Digital Subscriber Controller ( DSC Circuit
AM79C873KCW 10/100 MBPS Ethernet Physical Layer Single-chip Transceiver With 100BASE-FX Support
AM79C874VC Netphy-1lp Low Power 10/100-tx/fx Ethernet Transceiver
AM79C90JC CMOS Local Area Network Controller For Ethernet ( C-lance )
AM79C940JC Media Access Controller For Ethernet (MACETM)
AM79C940JCW CMOS Local Area Network Controller For Ethernet ( C-lance )
AM79C940KC Media Access Controller For Ethernet (MACETM)
AM79C940KCW CMOS Local Area Network Controller For Ethernet ( C-lance )
AM79C940VC Media Access Controller For Ethernet (MACETM)

AM29F400BT-60FE : 4 Megabit ( 512 K X 8-bit/256 K X 16-bit ) CMOS 5.0 Volt-only, Boot Sector Flash Memory-die Revision 1

AM29LV008B-90 :

AM29LV400BT80FEB : 4 Megabit ( 512 K X 8-bit/256 K X 16-bit ) CMOS 3.0 Volt-only Boot Sector Flash Memory

AM29LV640DH121RPCE : 64 Megabit ( 4 M X 16-bit ) CMOS 3.0 Volt-only Uniform Sector Flash Memory With Versatilei Control

S29WS256N0SBAW013 : CMOS 1.8 Volt-only Simultaneous Read/Write, Burst Mode Flash Memorythe WSXXXN Family Consists of 256, 128, And 64 Mbit, 1.8 Volt-only, SimultaneousRead/Write, Burst Mode Flash Memory Devices, Organized as 16, 8, or 4 Mwordsof 16 Bits. These Devices Use a Single VCC of 1.70 to 1.95

AM29DL324DB90EI : 4 Megabit (512 K x 8-bit/256 K x 16-bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory

AM29LV002BT-90ED : 256 Megabit (16 M x 16-bit/32 M x 8-bit) Mirrorbittm 3.0 Volt-only Uniform Sector Flash Memory with Versatilei/otm Control

AM29LV017D-120WCC : 256 Megabit (16 M x 16-bit/32 M x 8-bit) Mirrorbittm 3.0 Volt-only Uniform Sector Flash Memory with Versatilei/otm Control

Same catergory

AK134 : Integrated Quad Transceiver.

DS3658 : DS3658 - Quad High Current Peripheral Driver, Package: Mdip, Pin Nb=16.

HI-8585 : Arinc 429 Line Driver. The HI-8585 and HI-8586 are CMOS integrated circuits designed to directly drive the ARINC 429 bus an 8-pin package. Two logic inputs control a differential voltage between the output pins producing a +10 volt One, a -10 volt Zero, and a 0 volt Null. The CMOS/TTL control inputs are translated to ARINC specified amplitudes using on board zeners. A logic.

HIP4083 : 80V, 300mA Three Phase High Side Driver. The is a three phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP4083 may be used together for 3 phase full bridge applications (see application block diagram). Alternatively, the lower gates may be controlled directly from a buffered microprocessor output. Unlike other members of the HIP408x family, the HIP4083.

ISL81485 : 5v, 30mbps, Rs-485/rs-422 Transceiver. The Intersil is a BiCMOS, 5V powered, single transceiver that meets both the RS-485 and RS-422 standards for balanced communication, and a larger output voltage and higher data rate to benefit high speed applications. Unlike competitive devices, this Intersil transceiver is specified for 10% tolerance supplies to 5.5V), and it delivers a much larger.

LB1910 : FDD Spindle Motor Driver. The a 3-phase disc drive motor driver that is optimal for use a 3.5-inch FDD spindle motor driver. Three-phase full-wave linear driver Digital speed control circuit Start and stop circuits (active low) RPM switching H: 300 rpm L: 360 rpm Current limiter circuit Built-in index comparator Thermal shutdown circuit s Parameter Maximum supply voltage Maximum.

LSI53C180 : SCSI bus expanders and enclosure. Ultra160 Scsi Bus Expander Technical Manual V1.3 6/01.

MAX3250 : MAX3250 ±50V ISOlated, 3.0V to 5.5V, 250kbps, 2 Tx/2 Rx, RS-232 Transceiver.

MB86941 : CMOS Peripheral Lsi For Sparclite. MB86941 and MB86942 are dedicated peripheral LSIs for SPARClite*. The MB86941 and MB86942 are designed to enable compact configuration of high-performance systems with SPARClite architecture, and provide the following . * : SPARC is a registered trademark of SPARC International base on technology developed by Sun Microsystems, Inc. SPARClite is a trademark.

MIC5821/5822 : Latched/Addressable. 8-bit Serial-input Latched Drivers. BiCMOS technology gives the MIC5821/5822 family flexibility beyond the reach of standard logic buffers and power driver arrays. These devices each have an eight-bit CMOS shift register, CMOS control circuitry, eight CMOS data latches, and eight bipolar current-sink Darlington output drivers. The 500mA outputs are suitable for use with incandescent bulbs.

PC87310 : (super I/o) Dual Uart With Floppy Disk Controller & Parallel Port (discontinued).

SN75151N : ti SN75151, Quadruple Differential Line Driver. Meets or Exceeds the Requirement of ANSI EIA/TIA-422-B High-Impedance Output State for Party-Line Operation High Output Impedance in Power-Off Condition Low Input Current to Minimize Loading Single 5-V Supply 40-mA Sink- and Source-Current Capability High-Speed Schottky Circuitry Low Power Requirements This line driver is designed to provide differential.

TND017MP : . Lowside Power Switch Lamp, Solenoid, and Motor-Driving Applications N-channel MOSFET built in. Overheat protection. Overcurrent protection. (Self recovery type current limiting function) Overvoltage protection. TND017SW incorporates two sets of circuit. Parameter Drain-to-Source Voltage Output Current Input Voltage Symbol VDS IO(DC) VIN TND017MP Allowable.

V23818-N15-L616 : Small Form Factor Single Mode 1300 NM Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning With LC Connector, With Collar.

MAX13041 : ±80V Fault-Protected High-Speed CAN Transceiver With Low-Power Management And Wake-On CAN The MAX13041 ±80V fault-protected, high-speed controller area network (CAN) transceiver is ideal for high-speed automotive network applications where high reliability and advanced power management are required. The device links a CAN protocol controller to the physical.

SN75DP126SSRHUR : DisplayPort 1:2 Re-Driver Switch With TMDS Translator The SN75DP126 switches one Dual-Mode DisplayPort (DP++) input to one Dual-Mode DisplayPort (DP++) sink output or one HDMI/DVI sink output. The HDMI/DVI output has a built-in level translator compliant with DVI 1.0 and HDMI 1.4b standard TMDS signaling, and is specified up to a maximum data rate of 3.4 Gbps,.

0-C     D-L     M-R     S-Z