Details, datasheet, quote on part number: AME8500AEEVBE28
PartAME8500AEEVBE28
Category
DescriptionUprocessor Supervisory
CompanyAnalog Micro
DatasheetDownload AME8500AEEVBE28 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The AME8500 family allows the user to customize the CPU reset function without any external components. The user has a large choice of reset voltage thresholds, reset time intervals, and output driver configurations, all of which are preset at the factory. Each wafer is trimmed to the customer's specifications. These circuits monitor the power supply voltage of P based systems. When the power supply voltage drops below the voltage threshold a reset is asserted immediately (within an interval TD1). The reset remains asserted after the supply voltage rises above the voltage threshold for a time interval, TD2. The reset output may be either active high (RESET) or active low (RESETB). The reset output may be configured as either push/pull or open drain. The state of the reset output is guaranteed to be correct for supply voltages greater than 1V. The AME8501 includes all the above functionality plus an overtemperature shutdown function. When the ambient temperature exceeds 80oC a reset is asserted and remains asserted until the temperature falls below 60oC. Space saving SOT23 packages and micropower quiescent current (<3.0A) make this family a natural for portable battery powered equipment.

Note: * External pull-up resistor is required if opendrain output is used. k is recommended.

l Small packages: l 11 voltage threshold options l Tight voltage threshold tolerance l 5 reset interval options l 4 output configuration options l Wide temperature range 85oC l Low temperature coefficient 100ppm/oC(max) l Low quiescent current 3.0A l Thermal shutdown option (AME8501)

Portable electronics Power supplies Computer peripherals Data acquisition systems Applications using CPUs Consumer electronics



GND RESETB/RESET Ground This pin can be ordered as RESET or RESETB. RESET is active high. RESETB is active low. It is also available with an open drain or pushpull output. Positive power supply. A reset is asserted after this voltage drops below a predetermined level. After V DD rises above that level the reset output remains asserted until the end of the reset timeout period.


 

Related products with the same datasheet
AME8500AEETAA16
AME8500AEETAA18
AME8500AEETAA19
AME8500AEETAA20
AME8500AEETAA22
AME8500AEETAA23
AME8500AEETAD15
AME8500AEETAD16
AME8500AEETAD18
AME8500AEETAD19
AME8500AEETAD20
AME8500AEETAD22
Some Part number from the same manufacture Analog Micro
AME8500AEEVBE29 Uprocessor Supervisory

AME8500BEFTDA27 : 3-Pin/5-Pin Micropower P Reset Family

AD9516-0BCPZ : The AD9516-0* provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.55 GHz to 2.95 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The AD9516-0 emphasizes low jitter and phase

AIC810-26PUTR : 3-pin Microprocessor Reset Circuits

AME1505ACDV250 : High Power Bipolar Linear LDO

ADP5501 : Programmable Current Backlight Driver with Ambient Light Sensor Input

AD7893BR-10REEL : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 1 Single-Ended, Bipolar Tape & Reel (TR) Single Supply; IC ADC 12BIT SRL T/H LP 8-SOIC Specifications: Number of Bits: 12 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Data Interface: Serial ; Packaging: Tape & Reel (TR) ; Sampling Rate (Per Second): 117k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Single Supply ; Number of Inputs and Type: 1 Single-Ended, B

AD7731BR-REEL7 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 3 Differential, Unipolar; 3 Differential, Bipolar; 5 Pseudo-Differential, Unipolar; 5 Pseudo-Differential, Bipolar Tape & Reel (TR) Analog and Digital; IC ADC 24BIT SIGMA-DELTA 24-SOIC Specifications: Number of Bits: 24 ; Package / Case: 24-SOIC (0.295", 7.50mm Width) ; Data Interface: DSP, Serial, SPI ; Packaging: Tape & Reel (TR) ; Sampling Rate (Per Second): 6.4k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type:

ADM8616MCYAKSZ-RL7 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Cut Tape (CT) 1; IC SUPERVISOR WATCHDOG LV SC70-4 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: SC-82A, SOT-343 ; Packaging: Cut Tape (CT) ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 4.38V ; Operating Temperature: -40C ~ 85C ; Le

ADP8140 : 4 Channel High Current LED Driver With Adaptable Power Control The ADP8140 provides high current control of up to four LED drivers. Each driver can sink up to 500 mA. The sink current is programmed for all four drivers with one external resistor. The device features a feedback output which contr

AD7247ABRZ : DUAL, PARALLEL, WORD INPUT LOADING, 5 us SETTLING TIME, 12-BIT DAC, PDSO24 Specifications: Package Type: SOIC, SOIC-24 ; Screening Level: Industrial ; Pins: 24 ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADF5355 : MICROWAVE WIDEBAND SYNTHESIZER WITH INTEGRATED VCO The ADF5355 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and external reference frequency. The wideband microwave VCO design permits frequency operation from 7 MHz to 14 GHz at one RF output. A series of freq

 
0-C     D-L     M-R     S-Z