Details, datasheet, quote on part number: AME8500AEEVBE31
PartAME8500AEEVBE31
Category
DescriptionUprocessor Supervisory
CompanyAnalog Micro
DatasheetDownload AME8500AEEVBE31 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The AME8500 family allows the user to customize the CPU reset function without any external components. The user has a large choice of reset voltage thresholds, reset time intervals, and output driver configurations, all of which are preset at the factory. Each wafer is trimmed to the customer's specifications. These circuits monitor the power supply voltage of P based systems. When the power supply voltage drops below the voltage threshold a reset is asserted immediately (within an interval TD1). The reset remains asserted after the supply voltage rises above the voltage threshold for a time interval, TD2. The reset output may be either active high (RESET) or active low (RESETB). The reset output may be configured as either push/pull or open drain. The state of the reset output is guaranteed to be correct for supply voltages greater than 1V. The AME8501 includes all the above functionality plus an overtemperature shutdown function. When the ambient temperature exceeds 80oC a reset is asserted and remains asserted until the temperature falls below 60oC. Space saving SOT23 packages and micropower quiescent current (<3.0A) make this family a natural for portable battery powered equipment.

Note: * External pull-up resistor is required if opendrain output is used. k is recommended.

l Small packages: l 11 voltage threshold options l Tight voltage threshold tolerance l 5 reset interval options l 4 output configuration options l Wide temperature range 85oC l Low temperature coefficient 100ppm/oC(max) l Low quiescent current 3.0A l Thermal shutdown option (AME8501)

Portable electronics Power supplies Computer peripherals Data acquisition systems Applications using CPUs Consumer electronics



GND RESETB/RESET Ground This pin can be ordered as RESET or RESETB. RESET is active high. RESETB is active low. It is also available with an open drain or pushpull output. Positive power supply. A reset is asserted after this voltage drops below a predetermined level. After V DD rises above that level the reset output remains asserted until the end of the reset timeout period.


 

Related products with the same datasheet
AME8500AEETAA16
AME8500AEETAA18
AME8500AEETAA19
AME8500AEETAA20
AME8500AEETAA22
AME8500AEETAA23
AME8500AEETAD15
AME8500AEETAD16
AME8500AEETAD18
AME8500AEETAD19
AME8500AEETAD20
AME8500AEETAD22
Some Part number from the same manufacture Analog Micro
AME8500AEEVBE40 Uprocessor Supervisory

AAT3258ITS-2.8-R-T1 : 300mA LDO Linear Regulator With P Reset The AAT3258 Combines a High-performance, Low-noise, 300mA Low Dropout Linear Regulator With a Microprocessor Reset Monitor. The 300mA Output Capability of The LDO Regulator Makes This Device Ideal For Use With Microprocessors And DSP Cores in Portable Pr

AME8501AEETBD21 : 3-Pin/5-Pin Micropower P Reset Family

AD8541AR-REEL : General-Purpose CMOS Rail-to-Rail Amplifier (Single) The AD8541/AD8542/AD8544 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. T

ADP2108ACPZ-1.2-R7 : 600 MA, 3 MHz Fast Transient Synchronous Step-Down Converter The ADP2108 is a high efficiency, low quiescent current stepdown dc-to-dc converter in ultrasmall WLCSP package. The total solution only requires three tiny external components. It uses a proprietary high speed current mode, constant freq

ADP5520 : Backlight Driver With I/O Expander The ADP5520 is a versatile single-chip, white LED backlight driver with a user configurable I/O expander. This device fits handset applications where the flip or slider section of the phone requires backlighting, I/O signaling and detecting, auxiliary LED lighting

ADP176ARMZ-3.3-R7 : 500 mA, Low Dropout, CMOS Linear Regulator

ADN2865ACP-RL7 : Continuous Rate 12.3mb/s to 2.7gb/s Clock and Data Recovery IC W/loop Timed Serdes

AD7890BR-10REEL : Data Acquisition - Adcs/dac - Special Purpose Integrated Circuit (ics) Surface Mount; IC DAS 12BIT 8CH 24-SOIC Specifications: Mounting Type: Surface Mount ; Package / Case: 24-SOIC (0.295", 7.50mm Width) ; Type: Data Acquisition System (DAS) ; RoHS Status: RoHS Non-Compliant

ADM6316BX46ARJ-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z