Details, datasheet, quote on part number: AME8500AEEVBE46
PartAME8500AEEVBE46
Category
DescriptionUprocessor Supervisory
CompanyAnalog Micro
DatasheetDownload AME8500AEEVBE46 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The AME8500 family allows the user to customize the CPU reset function without any external components. The user has a large choice of reset voltage thresholds, reset time intervals, and output driver configurations, all of which are preset at the factory. Each wafer is trimmed to the customer's specifications. These circuits monitor the power supply voltage of P based systems. When the power supply voltage drops below the voltage threshold a reset is asserted immediately (within an interval TD1). The reset remains asserted after the supply voltage rises above the voltage threshold for a time interval, TD2. The reset output may be either active high (RESET) or active low (RESETB). The reset output may be configured as either push/pull or open drain. The state of the reset output is guaranteed to be correct for supply voltages greater than 1V. The AME8501 includes all the above functionality plus an overtemperature shutdown function. When the ambient temperature exceeds 80oC a reset is asserted and remains asserted until the temperature falls below 60oC. Space saving SOT23 packages and micropower quiescent current (<3.0A) make this family a natural for portable battery powered equipment.

Note: * External pull-up resistor is required if opendrain output is used. k is recommended.

l Small packages: l 11 voltage threshold options l Tight voltage threshold tolerance l 5 reset interval options l 4 output configuration options l Wide temperature range 85oC l Low temperature coefficient 100ppm/oC(max) l Low quiescent current 3.0A l Thermal shutdown option (AME8501)

Portable electronics Power supplies Computer peripherals Data acquisition systems Applications using CPUs Consumer electronics



GND RESETB/RESET Ground This pin can be ordered as RESET or RESETB. RESET is active high. RESETB is active low. It is also available with an open drain or pushpull output. Positive power supply. A reset is asserted after this voltage drops below a predetermined level. After V DD rises above that level the reset output remains asserted until the end of the reset timeout period.


 

Related products with the same datasheet
AME8500AEETAA16
AME8500AEETAA18
AME8500AEETAA19
AME8500AEETAA20
AME8500AEETAA22
AME8500AEETAA23
AME8500AEETAD15
AME8500AEETAD16
AME8500AEETAD18
AME8500AEETAD19
AME8500AEETAD20
AME8500AEETAD22
Some Part number from the same manufacture Analog Micro
AME8500AEEVBF15 Uprocessor Supervisory

ADDAC87-CBII883 : -

ADUC847BS62-5 : Microconverter , 1-Cycle 8052 MCU + 10-Channel, 24-Bit ADC, Dual PWM Outputs, 62 K-byte Flash in 8 MM X 8 MM Chip-scale-package (CSP)

AME8500BEFTAA20 : Uprocessor Supervisory

AME8500CEEVDE40 : Uprocessor Supervisory

AD7983BRMZRL7 : 16-bit, 1.33 MSPS Pulsar ADC in Msop/qfn

ADP151ACBZ-2.75-R7 : Ultra Low Noise, 200 MA CMOS Linear Regulator The ADP151 is an ultra-low noise, low dropout, linear regulator that operates from 2.2 V to 5.5 V and provides up to 200 mA of output current. The low 140 mV dropout voltage at 200 mA load improves efficiency and allows operation over a wide input volta

AD5318ARUZ-REEL7 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tape & Reel (TR) Single Supply; IC DAC 10BIT OCTAL W/BUF 16TSSOP Specifications: Data Interface: Serial ; Number of Bits: 10 ; Operating Temperature: -40C ~ 105C ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Voltage Supply Source: Single Supply ; Settling Time: 6s ; Lead Free Status: Lead Free ; RoHS Status: RoHS Complia

AD5555CRUZ-REEL7 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Single Supply; IC DAC 14BIT DUAL SRL IN 16TSSOP Specifications: Data Interface: Serial ; Number of Bits: 14 ; Operating Temperature: -40C ~ 85C ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Packaging: Tube ; Voltage Supply Source: Single Supply ; Settling Time: 500ns ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ADM6713TAKSZ-REEL7 : Microprocessor Supervisory Circuit in 4-lead SC70

ADUM141D0BRWZ : DGTL ISO 3.75KV GEN PURP 16SOIC Analog Devices' family of quad-channel digital isolators are based on their iCoupler® technology. The parts families include ADuM140/2/3 and ADuM240/1/2. These isolators combine high-speed complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, providing

 
0-C     D-L     M-R     S-Z