Details, datasheet, quote on part number: AD8009AR
Description1 Ghz, 5,500 V/micros Low Distortion Amplifier
CompanyAnalog Devices
DatasheetDownload AD8009AR datasheet
Cross ref.Similar parts: HFA1130IBM, CLC449AJE, OPA658U, OPA658UB, OPA684UB, HFA1100IBZ, LMH6642, LMH6643, LMH6702, LMH6702QML-SP
Find where to buy


Features, Applications

FEATURES Ultrahigh Speed V/ s Slew Rate, 4 V Step, 545 ps Rise Time, 2 V Step, = +2 Large Signal Bandwidth 440 MHz, +2 320 MHz, = +10 Small Signal Bandwidth (3 dB) 1 GHz, +1 700 MHz, = +2 Settling Time 2 V Step, = +2 Low Distortion Over Wide Bandwidth SFDR 44 dBc @ 150 MHz, 2 V p-p 41 dBc @ 150 MHz, 2 V p-p 3rd Order Intercept (3IP) 26 dBm @ 70 MHz, +10 18 dBm @ 150 MHz, = +10 Good Video Specifications Gain Flatness to 75 MHz 0.01% Differential Gain Error, 150 0.01 Differential Phase Error, = 150 High Output Drive 175 mA Output Load Drive 10 dBm with 38 dBc SFDR @ 70 MHz, = +10 Supply Operation 5 V Voltage Supply 14 mA (Typ) Supply Current APPLICATIONS Pulse Amplifier IF/RF Gain Stage/Amplifiers High Resolution Video Graphics High Speed Instrumentations CCD Imaging Amplifier

PRODUCT DESCRIPTION The is an ultrahigh speed current feedback amplifier with a phenomenal 5,500 V/s slew rate that results in a rise time of 545 ps, making it ideal as a pulse amplifier. The high slew rate reduces the effect of slew rate limiting and results in the large signal bandwidth of 440 MHz required for high resolution video graphic systems. Signal quality is maintained over a wide bandwidth with worst case distortion of 40 dBc @ 250 MHz 1 V p-p). For applications with multitone signals such as IF signal chains, the third order Intercept of 12 dBm is achieved at the same frequency. This distortion performance coupled with the current feedback architecture make the AD8009 a flexible component for a gain stage amplifier in IF/RF signal chains. The AD8009 is capable of delivering over mA of load current and will drive four back terminated video loads while maintaining low differential gain and phase error of 0.02% and 0.04 respectively. The high drive capability is also reflected in the ability to deliver 10 dBm of output power @ 70 MHz with 38 dBc SFDR. The AD8009 is available in a small SOIC package and will operate over the industrial temperature range to +85C. The AD8009 is also available an SOT-23-5 and will operate over the commercial temperature range to 70C.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: Fax: 781/326-8703 Analog Devices, Inc., 2000

Model DYNAMIC PERFORMANCE 3 dB Small Signal Bandwidth, 0.2 V p-p R Package RT Package

Large Signal Bandwidth, 2 V p-p Gain Flatness 0.1 dB, 0.2 V p-p Slew Rate Settling Time to 0.1% Rise and Fall Time HARMONIC/NOISE PERFORMANCE SFDR 2 V p-p SFDR 2 V p-p Third Order Intercept (3IP) W.R.T. Output, = +10 Input Voltage Noise Input Current Noise Differential Gain Error Differential Phase Error DC PERFORMANCE Input Offset Voltage

TMINTMAX Offset Voltage Drift Input Bias Current TMINTMAX +Input Bias Voltage TMINTMAX Open Loop Transresistance TMINTMAX INPUT CHARACTERISTICS Input Resistance Input Capacitance Input Common-Mode Voltage Range Common-Mode Rejection Ratio OUTPUT CHARACTERISTICS Output Voltage Swing Output Current Short Circuit Current POWER SUPPLY Operating Range Quiescent Current Power Supply Rejection Ratio


Supply Voltage. 12.6 V Internal Power Dissipation2 Small Outline Package (R). 0.75 Watts Input Voltage (Common Mode). VS Differential Input Voltage. 3.5 V Output Short Circuit Duration. Observe Power Derating Curves Storage Temperature Range R Package. to +125C Operating Temperature Range (A Grade). to +85C Operating Temperature Range (J Grade). to 70C Lead Temperature Range (Soldering 10 sec). 300C

NOTES 1 Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 Specification is for device in free air: 8-Lead SOIC Package: 5-Lead SOT-23 Package: = 240C/W.

The maximum power that can be safely dissipated by the AD8009 is limited by the associated rise in junction temperature. The maximum safe junction temperature for plastic encapsulated devices is determined by the glass transition temperature of the plastic, approximately 150C. Exceeding this limit temporarily may cause a shift in parametric performance due to a change in the stresses exerted on the die by the package. Exceeding a junction temperature of 175C for an extended period can result in device failure. While the AD8009 is internally short circuit protected, this may not be sufficient to guarantee that the maximum junction temperature (150C) is not exceeded under all conditions. To ensure proper operation, it is necessary to observe the maximum power derating curves.

Figure 3. Plot of Maximum Power Dissipation vs. Temperature
Package Description Die 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 5-Lead SOT-23 Evaluation Board
Package Option SO-8 13" Tape and Reel 7" Tape and Reel 13" Tape and Reel 7" Tape and Reel SO-8

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD8009 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
AD8009AR-REEL 1 Ghz, 5,500 V/µs Low Distortion Amplifier
AD8009ART 1 Ghz, 5,500 V/us Low Distortion Amplifier
AD8009JRT 1 Ghz, 5,500 V/micros Low Distortion Amplifier
AD8009JRT-REEL 1 Ghz, 5,500 V/µs Low Distortion Amplifier
AD8010 Low Power, High Current Amplifier
AD8011 300 Mhz, 1 ma Current Feedback Amplifier
AD8012 Dual Low Power Current Feedback Amplifier
AD8012AR Dual 350 MHZ Low Power Amplifier
AD8012AR-REEL Dual Low Power Current Feedback Amplifier
AD8012ARM Dual 350 MHZ Low Power Amplifier
AD8012ARM-REEL Dual Low Power Current Feedback Amplifier
AD8013 Single Supply, Low Power, Triple Video Amplifier
AD8014 -
AD8014ACHIPS 400 MHZ Low Power High Performance Amplifier
AD8014AChips3 -
AD8014ART 400 MHZ Low Power High Performance Amplifier
AD8014ART2 -
AD8015 155 MBPS Transimpedance Amplifier

AD7541ASQ : -

AD9661AKR : Laser Diode Driver With Light Power Control

AD8041ANZ : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) Voltage Feedback Tube 5.8mA 1; IC OPAMP VF R-R LP LDIST 8DIP Specifications: Packaging: Tube ; Amplifier Type: Voltage Feedback ; Number of Circuits: 1 ; Package / Case: 8-DIP (0.300", 7.62mm) ; Slew Rate: 170 V/s ; Gain Bandwidth Product: - ; Current - Supply: 5.8mA ; Current - Output / Channel: 50mA ; Voltage - Supply, Single/Dual (): 3 V ~ 12 V, 1.5 V ~

AD7920BKS-REEL7 : 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO6 Specifications: Package Type: MO-203AB, SC-70, 6 PIN ; Screening Level: Industrial ; Pins: 6 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Sample Rate: 250 kSamples/Sec ; Input Voltage: 0.0 to 5.25 volts


ADA4851-4ARU-REEL : OP-AMP, 5000 uV OFFSET-MAX, PDSO6 Specifications: Supply Voltage (VS): 5 volts ; CMRR: 100 dB ; Slew Rate: 250 V/µs ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Package Type: SOT23, MO-178AB, SOT-23, 6 PIN ; Number of Pins: 6 ; Number of Devices: 1

ADM6317HARJ36DW-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)


5962-8757104XA : ANALOG TEMP SENSOR-CURRENT, 298.2uA, RECTANGULAR, THROUGH HOLE MOUNT Specifications: Sensor Type: Temperature ; Package / Mounting: CERAMIC, FP-2 ; Input Voltage: 4 to 30 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F)

Same catergory

DG444 : Improved, Quad, SPST Analog Switches. Maxim's redesigned DG444/DG445 analog switches now feature on-resistance matching (4 max) between switches and guaranteed on-resistance flatness over the signal range (9 max). These low on-resistance switches conduct equally well in either direction. They guarantee low charge injection (10pC max), low power consumption (35W max), and an electrostatic.

SMBJ5360A : Surface Mount Silicon Zener Diodes. * Complete Voltage Range to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current Pb / RoHS Free * Case : SMB (DO-214AA) Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead formed for Surface mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.093 gram Rating 25 C ambient.

C88320000 : C883 Series.

S-3-A-4-G : Test Connectors HEADED CUP. s: Manufacturer: IDI ; Product Category: Test Connectors ; RoHS:  Details ; Connector Type: Spring Contact Probes and Receptacles.

65520 : LABEL, TAG, 3INX5.5IN, 25PCS. s: Background Color: White ; Label Material: Polyester ; Label Type: Tag ; Pack Quantity: 25 ; Legend: Danger Do Not Operate ; Label Size: 3 x 5.5".

CXA-M14L-P : Inverters 12V; INVERTER 12V-INPUT 1500V-OUTPUT. s: Type: Inverters for CCFL and UV Lamps ; Voltage - Input: 12V ; Output: 1500V ; Size / Dimension: 2.20" L x 1.14" W x 0.59" H (56mm x 29mm x 15mm) ; Mounting Type: Through Hole ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

35835 : Vacuums, Accessory Tool Vacuum Kit; MINI ATTACHMENT SET BLOW VAC. s: Tool Type: Vacuum Kit ; : * ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RT0805CRD0753K6L : 53.6K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 53.6K OHM 1/8W .25% SMD 0805. s: Resistance (Ohms): 53.6K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.25% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ERJ-S14J105U : 1M Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES ANTI-SULFUR 1M OHM 5% 1210. s: Resistance (Ohms): 1M ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RT0805FRE07226KL : 226K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 226K OHM 1/8W 1% SMD 0805. s: Resistance (Ohms): 226K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SP-860-2562SR : Single Board Computers SMART PANEL O/E AM3715 1GHz 8'. ADLINK Technology SP-803 / SP-860 8" Smart Panels with Intel& 174; Atom& 8482; each feature high brightness, sunlight readable LCD display options, and an optional four-wire resistive touch sensor. The SP-803 Smart Panels have an Intel& 174; Atom& 8482; N455 Processor, and the SP-860 use the TI& 174;.

EAB23Z306U : CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 30 uF, CHASSIS MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Film Capacitors ; Applications: General Purpose ; Electrostatic Capacitors: Polypropylene ; Capacitance Range: 30 microF ; Capacitance Tolerance: 10 (+/- %) ; Mounting Style: CHASSIS MOUNT ; Operating Temperature: 85 C (185.

PW01B22-21SCNK001 : 21 CONTACT(S), ALUMINUM ALLOY, FEMALE, MIL SERIES CONNECTOR, CRIMP, RECEPTACLE. s: Applications: Military Connector ; Gender: Female ; Termination Types: Crimp ; Number of Contacts: 21.

SFH 7050 : Optical Switches, Specialized BioMon COB Multichip 3 emitters. OSRAM Opto Semiconductors' SFH 70xx BioMon Sensors are OSRAM's first integrated optical sensors for automatic fitness tracking. SFH 70xx includes three LEDs of different wavelengths, which are based on high-efficiency chip technology. The measurement starts or stops automatically when the sensor.

0-C     D-L     M-R     S-Z