Details, datasheet, quote on part number: ADDC02808PBKV
CategoryPower Management => DC-DC Converters
Description28 V, 200 W Pulsed DC/DC Converter With Integral Emi Filter
CompanyAnalog Devices
DatasheetDownload ADDC02808PBKV datasheet
Find where to buy


Features, Applications

FEATURES V dc Input, 200 W Pulse Output Integral EMI Filter Ultrafast Transient Response Minimal Output Voltage Deviation Low Weight: 80 Grams NAVMAT Derated Many Protection and System Features

200 W Pulsed DC/DC Converter with Integral EMI Filter ADDC02808PB


APPLICATIONS Distributed Power Architecture for Driving T/R Modules Motor and Actuator Drivers

The ADDC02808PB hybrid military dc/dc converter is compensated specifically for pulse applications where fast transient response and minimum output voltage deviation are required. It is also designed to deliver very high, pulsed output power. The unit is designed for high reliability and high performance applications where saving space and/or weight are critical. The ADDC02808PB has been characterized over a wide variety of load conditions. Its transient response has been set to insure output stability over a broad range of load capacitance. For applications that require factory modified compensation optimized for a specific load, or for applications that require a different output voltage than 8 V dc, contact the factory. The ADDC02808PB is available in a hermetically sealed, molybdenum based hybrid package and is easily heatsink mountable. Three screening levels are available, including military SMD.

1. 120 W/cubic inch pulsed power density with an integral EMI filter 2. Ultrafast transient response time with minimum output voltage deviation 3. Light weight: 85 grams 4. Operational and survivable over a wide range of input conditions: V50 V dc; survives low line, high line 5. High reliability; NAVMAT derated 6. Protection features include: Output Overvoltage Protection Output Short Circuit Current Protection Thermal Monitor/Shutdown Input Overvoltage Shutdown Input Transient Protection 7. System level features include: Current Sharing for Parallel Operation Logic Level Disable Output Status Signal Synchronization for Multiple Units Input Referenced Auxiliary Voltage Supply

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: Fax: 781/326-8703 Analog Devices, Inc., 1998

Parameter INPUT CHARACTERISTICS Steady State Operating Input Voltage Range 1 Abnormal Operating Input Voltage Range (Per MIL-STD-704D)1 Input Overvoltage Shutdown No Load Input Current Disabled Input Current OUTPUT CHARACTERISTICS2, 3 Output Voltage (VO) Case Temp Full +25C Full +25C Full +25C Min Max +25C Min Max +90C Full +25C

(TC = +25C, VIN 0.5 V dc, unless otherwise noted; full temperature range to +90C; all temperatures are case and C is the temperature measured at the center of the package bottom.)

Test Level Conditions 25 A Pulsed 25 A Pulsed ADDC02808PB Min Typ Max Units V mV p-p % VO nom % IO max A M

Line Regulation Load Regulation Output Ripple/Noise4 Output Current (IO)5 Output Overvoltage Protection Output Current Limit Output Short Circuit Current ISOLATION CHARACTERISTICS Isolation Resistance DYNAMIC CHARACTERISTICS4 Step Changes In Load (min to max) Step Changes In Load (max to min) Soft Start Turn-On Time THERMAL CHARACTERISTICS Efficiency

25 A, VIN 25 A, VIN 20 A, VIN 25 A Pulsed, VIN V dc VIN 28 V dc, 25 A Pulsed A, 5 kHz 2 MHz BW VIN 40 V dc, Pulsed 25 A, Open Remote Sense Connection = 90% VOUT Nom

40 Input to Output or Any Pin to Case V dc (Reference Section Entitled "Transient Response") (Reference Section Entitled "Response at End of Pulse") 25 A, From Inhibit High to Status High 2 A IOH 400 A IOL 1 mA IAUX = 5 mA, Load Current 12.5 A

Hottest Junction Temperature5 CONTROL CHARACTERISTICS Clock Frequency ADJUST (Pin 3) V ADJ STATUS (Pin 4) VOH VOL VAUX (Pin 5) VO (nom) INHIBIT (Pin 6) VIL IIL VI (Open Circuit) SYNC (Pin 7)6 VIH IIH ISHARE (Pin 8) TEMP (Pin 9)

NOTES V dc upper limit rated for transient condition to 50 ms. V dc lower limit rated for continuous operation during emergency condition. Steady state and abnormal input voltage range require source impedance sufficient to insure input stability at low line. See sections entitled System Instability Considerations and Input Voltage Range. 2 Measured at the remote sense points. 3 Unit regulates output voltage to zero load; tests performed at low continuous load and 200 W pulsed load. 4 CLOAD = 1,000 F. Output ripple/noise measured at converter output; may be smaller at external load capacitance. Unit is stable for C LOAD ranging from to 4,000 F. 5 Refer to section entitled "Pulse Output Power vs. Pulse Length" for more information. 6 Unit has internal pull-down; refer to section entitled Pin 7 (SYNC). Specifications subject to change without notice.

INHIBIT. 50 V dc, V dc SYNC. 8.0 V dc, V dc ISHARE. 6 V dc, V dc TEMP. 12 V dc, V dc Common-Mode Voltage, Input to Output. V dc Lead Soldering Temp (10 sec). +300C Storage Temperature. to +150C Maximum Junction Temperature. +150C Maximum Case Operating Temperature. +125C

*Absolute maximum ratings are limiting values, to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability under any of these conditions is not necessarily implied. Exposure of absolute maximum rating conditions for extended periods of time may affect device reliability.

to +85C Hermetic Package to +90C Hermetic Package to +125C Hermetic Package (ADDC02808PBTV/QMLH) EXPLANATION OF TEST LEVELS Test Level

100% production tested. 100% production tested at +25C, and sample tested at specified temperatures. Sample tested only. Parameter is guaranteed by design and characterization testing. Parameter is a typical value only. All devices are 100% production tested +25C. 100% production tested at temperature extremes for military temperature devices; guaranteed by design and characterization testing for industrial devices.

Feedback loop connection for remote sensing output voltage. Must always be connected to output return for proper operation. +SENSE Feedback loop connection for remote sensing output voltage. Must always be connected to +VOUT for proper operation. ADJUST Adjusts output voltage setpoint. STATUS Indicates output voltage is within 5% of nominal. Active high referenced to SENSE (Pin 1). VAUX Low level dc auxiliary voltage supply referenced to input return (Pin 10). INHIBIT Power Supply Inhibit. Active low and referenced to input return (Pin 10). SYNC Clock synchronization input for multiple units; referenced to input return (Pin 10). ISHARE Current share pin which allows paralleled units to share current typically within 5% at full load; referenced to input return (Pin 10). TEMP Case temperature indicator and temperature shutdown override; referenced to input return (Pin 10). VIN Input Return. +VIN +28 V Nominal Input Bus. +VOUT V dc Output. +VOUT V dc Output. +VOUT V dc Output. RETURN Output Return. RETURN Output Return. RETURN Output Return.

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
ADDC02808PBTV 28 V, 200 W Pulsed DC/DC Converter With Integral Emi Filter
ADDC02808PBTV/QMLH 28 v, 200 W Pulsed DC/DC Converter With Integral Emi Filter
ADDC02812DA 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter
ADDC02812DATV/QMLH 28 V/100 W DC/DC Converters With Integral Emi Filter
ADDC02815DA 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter
ADDC02815DATV/QMLH 28 V/100 W DC/DC Converters With Integral Emi Filter
ADDC02828SA 28 V/100 W DC/DC Converter With Integral Emi Filter
ADDC02828SA28 V/100 W DC/DC Converter With Integral Emi Filter
ADDC02828SAKV 28 V/100 W DC/DC Converter With Integral Emi Filter
ADDS-2101-3V ADSP-2100 Family Development Tools
ADDS-210XX ADSP-21000 Family Development Tools

AD561KD : 10-bit Digital-to-analog Converter Combined With a High Stability Voltage Reference Fabricated on a Single Monolithic Chip

SSM2165-2S : Audio PreAmp/Amp Complete Microphone Conditioner in an 8-Lead Package With Variable Compression & Noise Gating

ADCMP600BRJZ-RL : The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on Analog Devices proprietary XFCB2 process. These comparators are exceptionally versatile and easy to use. Features include an input range from VEE − 0.5 V to VCC + 0.2 V, low noise TTL-/CMOS-compatible output drivers,

ADA4851-1_07 : Low Power, Rail-to-rail Output, Video Op Amps with Ultralow Power

AME431BAJETA12Z : Adjustable Precision Shunt Regulator

AD9212ABCPZRL7-65 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 16 Single-Ended, Unipolar; 8 Differential, Unipolar Tray Analog and Digital; IC ADC 10BIT SRL 40MSPS 64LFCSP Specifications: Number of Bits: 10 ; Package / Case: 64-VFQFN Exposed Pad, CSP ; Data Interface: Serial, SPI ; Packaging: Tray ; Sampling Rate (Per Second): 40M ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 16 Single-Ended, Unipolar;

ADSP-BF514KSWZ-4 : Embedded - Dsp (digital Signal Processors) Integrated Circuit (ics) Fixed Point Tray 1.8V, 2.5V, 3.3V; IC DSP 16/32B 400MHZ LP 176LQFP Specifications: Package / Case: 176-LQFP Exposed Pad ; Packaging: Tray ; Type: Fixed Point ; Non-Volatile Memory: External ; On-Chip RAM: 116kB ; Interface: I²C, PPI, RSI, SPI, SPORT, UART/USART ; Voltage - I/O: 1.8V, 2.5V, 3.3V ; Voltage - Core: 1.30V ; Clock Rate: 400MHz ; Operating Tempe

ADM3483AR : LINE TRANSCEIVER, PDSO8 Specifications: Technology: RS422, RS485 ; Device Type: Transceiver ; Supply Voltage: 3.3V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: SOIC, SOIC-8 ; Pins: 8

ADM6317CZ42ARJ-RL7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6321HPARJ43AY-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADSP-BF706KCPZ-4 : Digital Signal Processors & Controllers - DSP, DSC Low Cost sngl core BF+ w/larg int l mem Analog Devices ADSP-BF706 Low Power Blackfin+ Embedded Processors with 1MByte L2 SRAM and ECC protection deliver performance up to 400MHz and maintain a low static power consumption rating of <100mW. With its integration of a rich set of industry-leading system peripherals and large on-chip me

0-C     D-L     M-R     S-Z