|Datasheet||Download ADDC02815 datasheet
FEATURES V dc Input, 100 W Output V dc Input, 100 W Output (ADDC02815DA) Integral EMI Filter Designed to Meet MIL-STD-461D Low Weight: 80 Grams NAVMAT Derated Many Protection and System Features APPLICATIONS Commercial and Military Airborne Electronics Missile Electronics Space-Based Antennae and Vehicles Mobile/Portable Ground Equipment
SENSE +SENSE ADJUST STATUS VOUT VAUX INHIBIT SYNC ISHARE TEMP VIN +VIN INPUT SIDE CONTROL CIRCUIT FIXED FREQUENCY DUAL INTERLEAVED POWER TRAIN VOUT OUTPUT FILTER VCOM +VOUT OUTPUT SIDE CONTROL CIRCUIT
The ADDC02812DA and ADDC02815DA hybrid military dc/ dc converters with integral EMI filter offer the highest power density of any dc/dc power converters with their features and in their power range available today. The converters with integral EMI filter are a fixed frequency, 1 MHz, square wave switching dc/dc power supply. They are not variable frequency resonant converters. In addition to many protection features, these converters have system level features that allow them to be used as a component in larger systems as well as a stand-alone power supply. The units are designed for high reliability and high performance applications where saving space and/or weight are critical. The ADDC02812DA and ADDC02815DA are available in a hermetically sealed, molybdenum based hybrid package and are easily heatsink mountable. Three screening levels are available, including military SMD.
1. 60 W/cubic inch power density with an integral EMI filter designed to meet all applicable requirements in MIL-STD461D when installed in a typical system setup 2. Light weight: 80 grams 3. Operational and survivable over a wide range of input conditions: V50 V dc; survives low line, high line, and positive and negative transients 4. High reliability; NAVMAT derated 5. Protection features include: Output Overvoltage Protection Output Short Circuit Current Protection Thermal Monitor/Shutdown Input Overvoltage Shutdown Input Transient Protection 6. System level features include: Current Sharing for Parallel Operation Inhibit Control Output Status Signal Synchronization for Multiple Units Input Referenced Auxiliary Voltage
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 1997
Parameter INPUT CHARACTERISTICS Steady State Operating Input Voltage (12 V) Steady State Operating Input Voltage (15 V) Abnormal Operating Input Voltage Range (per (12 V) Abnormal Operating Input Voltage Range (per (15 V) Input Voltage Shutdown V) No Load Input Current V/15 V) Disabled Input Current V/15 V) OUTPUT 3, 4 Regulated Output Voltage (+12 V) Case Temp
(TC = 25C, VIN V dc unless otherwise noted; full temperature range to +90C; all temperatures are case and TC is the temperature measured at the center of the package bottom.)
Line Regulation (12 V) Line Regulation (15 V) Load Regulation (12 V) Load Regulation (15 V) Output Ripple/Noise (Regulated +12 V)5 (Cross Regulated 12 V)5 Output Ripple/Noise (Regulated +15 V)5 (Cross Regulated 15 V)5 Total Output Current (IO) 12 V Total Output Current (IO) 15 V Output Overvoltage Protection (12 V) Output Overvoltage Protection (15 V) Output Current Limit V/15 V) Output Short Circuit Current V/15 V) ISOLATION CHARACTERISTICS Isolation Voltage
4.17 A, VIN 4.17 A, VIN 4.17 A, VIN 3.34 A, VIN 3.34 A, VIN 3.34 A, VIN 4.17 A, VIN 4.17 A, VIN 4.17 A, VIN 3.34 A, VIN 3.34 A, VIN 3.34 A, VIN 4.17 A, VIN 3.34 A, VIN V dc VIN 28 V dc, +4.17 A VIN 28 V dc, A, 5 kHz 2 MHz A, 5 kHz 2 MHz 12 V dc, VIN 15 V dc, VIN 4.17 A, Open Remote Sense Connection 3.34 A, Open Remote Sense Connection = 90% VOUT Nom
Parameter DYNAMIC CHARACTERISTICS Output Voltage Deviation Due to Step Change in Load (12 V) Output Voltage Deviation Due to Step Change in Load (15 V) Response Time Due to Step Change in Load (12 V)
Test Level Conditions 2.08 A di/dt = 0.5 A/µs, Measured to Within 2% of Final Value 1.67 A, di/dt = 0.5 A/µs, Measured to Within 2% of Final Value 4.17 A, from Inhibit High to Status High 3.34 A, from Inhibit High to Status High 0.34 A
Soft Start Turn-On Time (12 V) Soft Start Turn-On Time (15 V) THERMAL CHARACTERISTICS Efficiency (12 V)
Hottest Junction (12 V) Hottest Junction (15 V) CONTROL CHARACTERISTICS Clock Frequency (12 V) Clock Frequency (15 V) Adjust (Pin 3) VADJ (12 V) Adjust (Pin 3) VADJ (15 V) Status (Pin 4) VOH VOL VAUX (Pin 5) VO (nom) (12 V) VAUX (Pin 5) VO (nom) (15 V) Inhibit (Pin 6) VIL IIL VI (Open Circuit) SYNC (Pin 7)8 VIH IIH ISHARE (Pin (12 V) ISHARE (Pin (15 V) Temp (Pin 9)IOH 400 µA IOL 1 mA IAUX = 5 mA, Load Current 4.17 A IAUX = 5 mA, Load Current 3.34 A
NOTES 1 Military subgroups apply only to military qualified devices. V dc upper limit rated for transient condition to 50 ms. V dc lower limit rated for continuous operation during emergency condition. Steady state and abnormal input voltage range require source impedance sufficient to insure input stability at low line. See sections entitled System Instability Considerations and Input Voltage Range. 3 Measured at the remote sense points. 4 Output characteristics tested with balanced loads on each output; however, unit operates with unbalanced loads to 90%/10% split. 5 Regulated output typically performs with less ripple than cross regulated output. 100% test is performed with VD+ regulated and VD cross regulated. 6 CLOAD 0. 7 Refer to section entitled Thermal Characteristics for more information. 8 Unit has internal pull-down; refer to section entitled Pin 7 (SYNC). Specifications subject to change without notice.
|Some Part number from the same manufacture Analog Devices|
|ADDC02815DA 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter|
|ADDC02815DATV/QMLH 28 V/100 W DC/DC Converters With Integral Emi Filter|
|ADDC02828SA 28 V/100 W DC/DC Converter With Integral Emi Filter|
|ADDC02828SA28 V/100 W DC/DC Converter With Integral Emi Filter|
|ADDC02828SAKV 28 V/100 W DC/DC Converter With Integral Emi Filter|
|ADDS-2101-3V ADSP-2100 Family Development Tools|
|ADDS-210XX ADSP-21000 Family Development Tools|
|ADDS-2111-EZ-ICE ADSP-2100 Family Development Tools|
AD5248BRM10-RL7 : 256-Position Dual Channel I2C Compatible Digital Resistor
AD8314 : 0.1 - 2.5 Ghz, 45 DB Logarithmic Detector / Controller
AIC1722A-50PXTTR : 300ma Low Dropout Linear Regulator
AME8501BEFTAD16 : Uprocessor Supervisory
ADG742BKSZ-R2 : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC SWITCH SPST SC70-6 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ADF4159 : Direct Modulation/Fast Waveform Generating 13 GHz Fractional-N Frequency Synthesizer The ADF4159 is a 13 GHz, fractional-N frequency synthesizer with modulation and both fast and slow waveform generation capability. It contains a 25-bit fixed modulus allowing sub-hertz resolution at 13 GHz. It consists of a low noise digital phase frequency detector (PFD), a precision charge pump, a
AD1938WBSTZ : SERIAL INPUT LOADING, DAC WITH PROGRAMMABLE PLL, PQFP48 Specifications: Package Type: LFQP, ROHS COMPLIANT, MS-026BBC, LQFP-48 ; Screening Level: Industrial ; Pins: 48 ; Operating Temperature: -40 to 105 C (-40 to 221 F)
ADM6317HARJ29DW-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
ADM6320AY42ARJ-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
5962R9863601VGA : OP-AMP, 2500 uV OFFSET-MAX, MBCY8 Specifications: Supply Voltage (VS): 15 volts ; IBIAS: 3.00E-4 ÂµA ; CMRR: 85 dB ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: METAL CAN-8 ; Number of Pins: 8 ; Number of Devices: 1
50N1388 : Digital Sound Level Meter.
LA7222 : Analog Switch, Package : Sip. The 2-channel 2-position high-performance analog switch having wide application from audio band to video band. s Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Parameter Recommended supply voltage Operating voltage Symbol VCC op Conditions Ratings to 13 Unit V Parameter.
M44C090 : MARC4 Family. The M44C090 and M44C890 are members of Atmels family of 4-bit single-chip microcontrollers. They offer highest integration for IR and RF data communication and remote-control applications. The M44C890 is suitable for the transmitter side. It contains ROM, RAM, parallel I/O ports, one 8-bit programmable multifunction timer/ counter with modulator function,.
TDA2824 : Dual Power Amplifier. SUPPLY VOLTAGE DOWN 3 V HIGH SVR LOW CROSSOVER DISTORTION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION The is a monolithic integrated circuit in 12+2+2 powerdip, intended for use as dual audio power amplifier in portable radios and TV sets. Symbol VS IO Ptot Tstg, Tj Supply Voltage Output Peak Current Total Power Dissipation at Tamb = 50°C Tamb.
EMD5DXV6T1 : Dual Bias Resistor Transistors. Product Preview Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. These digital transistors are designed to replace.
450-CK2160 : Knobs & Dials BLK 21.3mm,6.0 Shaft No Marker Line. The Eagle Plastic Devices Collet Knob System includes collet knobs in 15mm and 21mm sizes for 6mm and 6.4mm shafts. The 15mm collet knob is available with a marker line. The collet knobs are secured to the shafts by a proven collet tightening method. With its modular design, multiple accessories can plug.
08055U5R6BAT2A : 5.6pF Ceramic Capacitor 0805 (2012 Metric) 50V; CAP CER 5.6PF 50V NP0 0805. s: Capacitance: 5.6pF ; Voltage - Rated: 50V ; Tolerance: ±0.1pF ; Package / Case: 0805 (2012 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : Ultra-Low ESR ; Lead Spacing: - ; Operating Temperature: -55°C ~ 125°C ; Mounting Type: Surface Mount,.
10 295 5002 : HOSE COUPLING. s: Fitting Type: Nipple ; Bore Size: 6mm ; Outer Diameter: 6mm ; Thread Size - Metric: - ; Body Material: -.
PRA100I2-1KBWN : Resistor Networks & Arrays 1/10watt 1Kohms ABS 0.1% Ratio .05%. s: Manufacturer: Vishay ; Product Category: Resistor Networks & Arrays ; RoHS: Details ; Product Type: Arrays ; Circuit Type: Isolated ; Number of Resistors: 2 ; Resistor Values: 1 KOhms ; Tolerance: 0.1 % ; Temperature Coefficient: 10 PPM / C ; Number of Pins: 4 ; Operating Temperature.
7440430018 : Power Inductors 2.7A, 1.8uH DCR Max=0.02 +/-30%. s: Manufacturer: Wurth Electronics ; Product Category: Power Inductors ; RoHS: Details ; Inductance: 1.8 uH ; Tolerance: 30 % ; Maximum DC Current: 2.7 Amps ; Maximum DC Resistance: 0.025 Ohms ; Operating Temperature Range: - 40 C to + 125 C ; Self Resonant Frequency: 120 MHz ; Dimensions: 4.8 mm W x 4.8 mm L x 2.8 mm H ; Termination.
1-440054-2 : Tin Through Hole Rectangular - Headers, Male Pin Connectors, Interconnect Header, Shrouded; CONN HEADER 12POS 2MM VERT T/H. s: Color: Natural ; Connector Type: Header, Shrouded ; Contact Finish: Tin ; Contact Mating Length: 0.132" (3.35mm) ; : - ; Mounting Type: Through Hole ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch: 0.079" (2.00mm).
GTC18SABN-M30 : Tin-Lead Surface Mount Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded; CONN HEADER 18POS .100 SGL SMD. s: Color: Black ; Connector Type: Header, Unshrouded ; Contact Finish: Tin-Lead ; Contact Mating Length: 0.230" (5.84mm) ; : - ; Mounting Type: Surface Mount ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch:.
0760405008 : Gold Through Hole Backplane - Specialized Connectors, Interconnect Receptacle, Female Sockets; CONN RCPT 240POS 8COL RT ANG. s: Color: Black ; Connector Style: I-Trac ; Connector Type: Receptacle, Female Sockets ; Connector Usage: Coplanar, Daughtercard ; Contact Finish: Gold ; Contact Finish Thickness: 30µin (0.76µm) ; Contact Layout, Typical: - ; : - ; Mounting.
CRCW121013K0FKEA : 13K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 13.0K OHM 1/2W 1% 1210 SMD. s: Resistance (Ohms): 13K ; Power (Watts): 0.5W, 1/2W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
ABLS-16.000MHZ-K4T : 16MHz Crystal Crystal And Oscillator Surface Mount; CRYSTAL 16.00000 MHZ 18PF SMD. s: Frequency: 16MHz ; Load Capacitance: 18pF ; Package / Case: HC49/US ; Packaging: Cut Tape (CT) ; Frequency Tolerance: ±30ppm ; Mounting Type: Surface Mount ; Operating Mode: Fundamental ; Operating Temperature: -40°C ~ 125°C ; Type: MHz Crystal ; Lead Free Status:.
796859-2 : Free Hanging (In-Line) Terminal Block - Headers, Plug And Socket Connectors, Interconnect Plug, Female Sockets; TERM BLOCK PLUG 2POS R/A 5.08MM. s: Terminal Block Type: Plug, Female Sockets ; Positions Per Level: 2 ; Pitch: 0.200" (5.08mm) ; Number of Levels: 1 ; Header Orientation: - ; Plug Wire Entry: 180° ; Termination: Screw ; Wire Gauge: 12-30.
2N3903D75Z : 200 mA, 40 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92. s: Polarity: NPN.