|Category||Power Management => DC-DC Converters => Single Output|
|Description||V/100 W DC/DC Converter With Integral Emi Filter|
|Datasheet||Download ADDC02828SA28 datasheet
FEATURES V dc Input, 100 W Output Integral EMI Filter Designed to Meet MIL-STD-461D Low Weight: 80 Grams NAVMAT Derated Many Protection and System Features APPLICATIONS Commercial and Military Airborne Electronics Missile Electronics Space-Based Antennae and Vehicles Mobile/Portable Ground Equipment Distributed Power Architecture for Active Array Radar
SENSE + SENSE ADJUST STATUS RETURN VAUX INHIBIT SYNC ISHARE TEMP VIN +VIN INPUT SIDE CONTROL CIRCUIT FIXED FREQUENCY DUAL INTERLEAVED POWER TRAIN RETURN SENSEREF +VOUT OUTPUT SIDE CONTROL CIRCUIT
The ADDC02828SA hybrid dc/dc converter with integral EMI filter offers the highest power density of any dc/dc converter available today with its features and in its power range. The converter with integral EMI filter is a fixed frequency, 1 MHz, square wave switching dc/dc power supply. It is not a variable frequency resonant converter. In addition to many protection features, this converter has system level features that allow to be used as a component in larger systems as well as a standalone power supply. The unit is designed for high reliability and high performance applications where saving space and/or weight is critical. The ADDC02828SA is available in three screening grades; all grades use a hermetically sealed, molybdenum based hybrid package. Contact factory for MIL-STD-883 device availability.
1. 60 W/cubic inch power density with an integral EMI filter designed to meet all applicable requirements in MIL-STD461D when installed in a typical system setup. 2. Light weight: 80 grams 3. Operational and survivable over a wide range of input conditions: V50 V dc; survives low line, high line and positive and negative transients. See Input Voltage Range section. 4. High reliability; NAVMAT derated 5. Protection Features Include: Output Overvoltage Protection Output Short Circuit Current Protection Thermal Monitor/Shutdown Input Overvoltage Shutdown Input Transient Protection 6. System Level Features Include: Current Sharing for Parallel Operation Inhibit ControlOutput Status Signal Synchronization for Multiple Units Input Referenced Auxiliary Voltage Supply
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 © Analog Devices, Inc., 1997
Parameter INPUT CHARACTERISTICS Steady State Operating Input Voltage Range1 Abnormal Operating Input Voltage Range (Per MIL-STD-704D)1 Input Overvoltage Shutdown No Load Input Current Disabled Input Current OUTPUT CHARACTERISTICS2, 3 Output Voltage (VO) Case Temp Full +25°C Full +25°C Full +25°C
(TC = +25C, VIN 0.5 V dc, unless otherwise noted; full temperature range to +90C; all temperatures are case and TC is the temperature measured at the center of the package bottom.)
Line Regulation Load Regulation Output Ripple/Noise4 Output Current (IO) Output Overvoltage Protection Output Current Limit Output Short Circuit Current ISOLATION CHARACTERISTICS Isolation Resistance DYNAMIC CHARACTERISTICS Maximum Output Voltage Deviation Due to Step Change in Load Response Time Due to Step Change in Load Soft Start Turn-On Time5 THERMAL CHARACTERISTICS Efficiency
1.8 A, di/dt = 0.5 A/µs 1.8 A, di/dt = 0.5 A/µs Time for VOUT to Return within 2% of Final Value 3.6 A, From Inhibit High to Status High 0.36 A IOH 400 µA IOL 1 mA IAUX = 5 mA, Load Current 3.6 A
Hottest Junction Temperature6 CONTROL CHARACTERISTICS Clock Frequency ADJUST (Pin 3) V ADJ STATUS (Pin 4) VOH VOL VAUX (Pin 5) VO (nom) INHIBIT (Pin 6) VIL IIL VI (Open Circuit) SYNC (Pin 7)7 VIH IIH ISHARE (Pin 8) TEMP (Pin 9) NOTES
V dc upper limit rated for transient condition to 50 ms. V dc lower limit rated for continuous operation during emergency condition. Steady state and abnormal input voltage range require source impedance sufficient to ensure input stability at low line. See sections entitled System Instability Considerations and Input Voltage Range. 2 Measured at the remote sense points. 3 Unit regulates output voltage to zero load. 4 CLOAD 0. 5 Output is fully loaded into a constant resistive load. 6 Refer to Thermal Characteristics section for more information. 7 Unit has internal pull-down; refer to section entitled Pin 7 (SYNC). Specifications subject to change without notice.
INHIBIT. 50 V dc, V dc SYNC. 8.0 V dc, V dc ISHARE. 6 V dc, V dc TEMP. 12 V dc, V dc Common-Mode Voltage, Input to Output. V dc Lead Soldering Temp (10 sec). +300°C Storage Temperature. to +150°C Maximum Junction Temperature. +150°C Maximum Case Operating Temperature. +125°C
*Absolute maximum ratings are limiting values, to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability under any of these conditions is not necessarily implied. Exposure of absolute maximum rating conditions for extended periods of time may affect device reliability.
Function Feedback loop connection for remote sensing output voltage. Must always be connected to output return for proper operation. Feedback loop connection for remote sensing output voltage. Must always be connected to +VOUT for proper operation. Adjusts output voltage setpoint. Indicates output voltage is within 5% of nominal. Active high referenced to SENSE (Pin 1). Low level dc auxiliary voltage supply referenced to input return (Pin 10). Power Supply Inhibit. Active low and referenced to input return (Pin 10). Clock synchronization input for multiple units; referenced to input return (Pin 10). Current share pin that allows paralleled units to share current typically within 5% at full load; referenced to input return (Pin 10). Case temperature indicator and temperature shutdown override; referenced to input return (Pin 10). Input Return. +28 V Nominal Input Bus. V dc Output. V dc Output. Output Sense Reference. Output Sense Reference. Output Return. Output Return. PIN CONFIGURATIONORDERING GUIDE Operating Temperature Range (Case)
to +85°C Hermetic Package to +90°C Hermetic Package to +125°C Hermetic Package
100% production tested. 100% production tested at +25°C, and sample tested at specified temperatures. Sample tested only. Parameter is guaranteed by design and characterization testing. Parameter is a typical value only. All devices are 100% production tested +25°C. 100% production tested at temperature extremes for military temperature devices; guaranteed by design and characterization testing for industrial devices.
CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
|Some Part number from the same manufacture Analog Devices|
|ADDC02828SAKV 28 V/100 W DC/DC Converter With Integral Emi Filter|
|ADDS-2101-3V ADSP-2100 Family Development Tools|
|ADDS-210XX ADSP-21000 Family Development Tools|
|ADDS-2111-EZ-ICE ADSP-2100 Family Development Tools|
|ADDS-2181-EZLITE Ez-kit Lite For Analog Devices ADSP-218x DSP Family.|
|ADDS-218X-ICE-2.5V Ez- Ice(r) Serial Emulator For Analog Devices ADSP-218x Family of DSPS|
|ADDS-21XX-TOOLS ADSP-2100 Family Development Tools|
AD8004_03 : Quad 3000 V/§á, 35 mW Current Feedback Amplifier
AD8553 : Precision, Dual-channel Instrumentation Amplifier
AD7719BRUZ-REEL : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 3 Differential, Unipolar; 3 Differential, Bipolar Tube Analog and Digital; IC ADC 16BIT 24BIT DUAL 28-TSSOP Specifications: Number of Bits: 16/24 ; Package / Case: 28-TSSOP (0.173", 4.40mm Width) ; Data Interface: DSP, MICROWIRE™, QSPI™, Serial, SPI™ ; Packaging: Tube ; Sampling Rate (Per Second): 105 ; Operating Temperature: -40°C ~ 85°C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and
ADM6317AY40ARJ-RL7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
ADM6317BX45ARJZ-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
ADM6319C43ARJ-R7 : 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
ADM6320CW49ARJZ-RL7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, ROHS COMPLIANT, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)
GQ2540-7R : 60132 Watt DC-DC Converters. Input voltage ranges or 2 isolated outputs kV AC I/O electric strengh test voltage Extremely slim case (4TE wide), fully enclosed Extremely low inrush current, hot swappable Operating ambient temperaturerange 4071 °C with convection cooling Options Options Input voltage Inrush current ETS 300 132-2 refer to selection chart typ. 40 A Efficiency Output.
IP5560C : Switched.mode Power Supply Control Circuit. VCC VZ 2 FEEDBACK 3 GAIN 4 MODULATOR 5 DUTY CYCLE 6 CONTROL FEED FORWARD OUTPUT (COLLECTOR) OUTPUT (EMITTER) DEMAGNETISATION / OVERVOLTAGE GND CURRENT LIMITING REMOTE ON/OFF EXTERNAL SYNC STABILISED POWER SUPPLY TEMPERATURE COMPENSATED REFERENCE SOURCE SAWTOOTH GENERATOR PULSE WIDTH MODULATOR REMOTE ON/OFF SWITCHING CURRENT LIMITING LOW SUPPLY VOLTAGE.
LM337 : 3-Terminal 1.5A Negative Adjustable Regulator. Output current in excess of 1.5A Output voltage adjustable between -1.2V and - 37V Internal thermal overload protection Internal short circuit current limiting Output transistor safe area compensation Floating operation for high voltage applications Standard 3-pin TO-220 package The a 3-terminal negative adjustable regulator. It supplies in excess of 1.5A.
LTC1044 : Switched Capacitor Voltage Converter.
MAX690R : P Reset ic With Watchdog And Battery Switchover. These microprocessor (µP) supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery-control functions in µP systems. They significantly improve system reliability and accuracy compared to separate ICs or discrete components. These devices are designed for use in systems powered or 3.3V supplies.
PT6915 : Non-Isolated DC-DC Converters. 12 Watt 5V/3.3V Input Plus to Minus Voltage Converter Single-Device: +5V/3.3V input Remote Sense & +3.3V Input Voltage Adjustable Output Voltage 23-pin Space-Saving Package Solderable Copper Case The PT6910 series is a series of high performance 12 watt, plus to minus voltage convertors that are designed to power the latest ECL (5.2V) and GaAs (-2.0V).
S-818 : = Low Dropout ;; Input Voltage = 10 V Max. ;; Output Voltage = 2.0-6.0V ;; Output Current = 200 ma ;; Accuracy = ±2% ;; Current Consumption Typ. = 30 µA ;; Current Consumption Standby = 0.1 µA ;; Dropout Voltage = 300 MV @60 ma ;; Condition = Vout=3.0V, Vin=4V ;; Package (Power Dissipation) = SOT-23-5 (250mW) SOT-89-5 (500mW) ;; Note.
SMH4803A : Distributed Power (+20 to +500V) Hot Swap Controller With Power Sequencing.
TPS3820 : Processor Supervisory Circuits. Power-On Reset Generator With Fixed Delay Time ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current 15 µA (Typ) SOT23-5 Package Temperature Range. to 85°C applications Applications.
MAX8672 : The MAX8672 complete power manager for backup batteries in smart devices offers feature-programmable battery charging and main-system backup. The device includes a charger for 1- or 2-cell NiMH backup batteries. A low-quiescent current synchronous-rectified boost converter and LDO supply up to 20mA during system backup conditions. The BST output is internally.
STCS2 : Linear Regulators 2 A max constant current LED driver. 40 V input voltage Less than 0.5 V voltage overhead 2 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic Applications LED constant current supplying for varying input voltages Low voltage lighting Small appliances LED lighting Car LED lights The current is set with external resistor 2 A with a ±10% precision; a dedicated pin allows.
LM34919 : 40V, 600 MA Step Down COT Switching Regulator From The PowerWise?? Family The LM34919 Step Down Switching Regulator all of the functions needed to implement a low cost, efficient, buck bias regulator capable of supplying 0.6A to the load. This buck regulator contains an N-Channel Buck Switch, and is available in a micro SMD package. The constant on-time.
HV892 : Liquid Lens Driver IC Liquid Lens Driver IC. Drives capacitive loads to 200pF Programmable drive amplitude (compatible with to 60VRMS lenses) On-chip boost converter No external inductor I2C interface Low operating current (20mA) Low standby current (1.0µA) Controlled drive edge reduces EMI 10-Lead 4x4mm DFN Package The HV892 liquid lens driver is controlled via an I2C interface, is capable of driving.
L6756D : DC-DC Conversio 2/3/4 phase buck controller for VR10, VR11 and VR11.1 processor applications.
MAX16922 : 2.2MHz, Dual, Step-Down DC-DC Converters, Dual LDOs, And Active-Low RESET The MAX16922 power-management integrated circuit (PMIC) is designed for medium power-level automotive applications and integrates multiple supplies in a small footprint. The device includes one high-voltage step-down converter (OUT1) and three low-voltage cascaded DC-DC converters.
L6230 : Motor Driver ICs DMOS driver for three-phase brushless DC motor. Operating supply voltage from 2.8 A output peak current (1.4 A RMS) RDS(on) 0.73 typ. value 25 °C Integrated fast free wheeling diodes Operating frequency to 100 kHz Non dissipative overcurrent detection and protection Cross conduction protection Diagnostic output Uncommitted comparator Thermal shutdown Under voltage lockout VFQFPN32 PowerSO36 The is a DMOS.
PT7M7811LDE : µ µ µ µ µP Supervisor Circuits The PT7M7xxx family microprocessor (µP) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in µP systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..