Details, datasheet, quote on part number: ADDS210XXW
CompanyAnalog Devices
DatasheetDownload ADDS210XXW datasheet


Features, Applications

EZ-LAB DEVELOPMENT BOARD Enables Evaluation, Prototyping, and Development of ADSP-21000 Family-Based Systems 16-Bit IBM-AT Compatible Plug-In Board EZ-KIT Includes the EZ-LAB Development Board, Development Software Tools, and C Compiler and Runtime Library EZ-ICE EMULATOR Full Speed, In-Circuit Emulation 8-Bit IBM-PC/AT Compatible Plug-In Board with Small 11-Pin JTAG In-Circuit Probe ICEPACTM EMBEDDABLE IN-CIRCUIT EMULATOR Incorporates Embedded Emulation Functionality in a Plug-In Target Board (ADSP-2106x Only)

ASSEMBLER Easy-to-Use Algebraic Syntax LINKER Combines Object and Library Files ASSEMBLY LIBRARY/LIBRARIAN Includes Set of Arithmetic and DSP Functions SIMULATOR Reconfigurable, MS Windows GUI Interface Full Symbolic Disassembly and On-Line Assembly Simulates Memory and Port Configurations Plots Memory Graphically PROM SPLITTER OPTIMIZING G21K ANSI C COMPILER Includes C-Callable Library of ANSI Standard and DSP Functions Supports In-Line Assembly Code CBUGTM C SOURCE LEVEL DEBUGGER Integrated with Simulator and Emulator; Uses Same GUI Interface C RUNTIME LIBRARY Includes Over 150 DSP and Mathematical Functions

CBUG and ICEPAC are trademarks of Analog Devices, Inc. EZ-LAB and EZ-ICE are registered trademarks of Analog Devices, Inc.


Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Analog Devices, Inc., 1995 One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703

The ADSP-21000 Family Development Tools let you design applications for the ADSP-21000 family of Floating-Point DSP processors, including the ADSP-2106x SHARC. These tools enable you to develop hardware architectures together with creating and debugging code for your applications throughout the research, design, development, and test stages. The System Development Diagram illustrates how the tools work together. These tools are compatible with IBM-AT or Sun4 host platforms. Components of the ADSP-21000 Family Development Tools fall into one of two broad categories: Software Tools and Hardware Tools.

The ADSP-21000 Family Simulator runs the program on a software model of the DSP, reproducing the execution of the program by the processor in hardware. The simulator displays different portions of the virtual hardware environment through a reconfigurable windows interface identical to the emulator software interface.

EZ-LAB Development Board EZ-ICE In-Circuit Emulator ICEPAC Embeddable In-Circuit Emulator (SHARC only) EZ-KIT and EZ-KIT Plus

Assembler Linker Simulator PROM Splitter Assembly Library/Librarian Optimizing G21K ANSI C Compiler with Numeric C Extensions CBUG C Source-Level Debugger C Runtime Library The Assembler translates ADSP-21000 Family assembly language source files into object code. The G21K C Compiler compiles C source files into object files or, optionally, into assembly language source files. The Linker then links the multiple object files together with various library files to form an executable program.

The ADSP-2106x and ADSP-21020 EZ-LAB Development Boards are ready-to-run target system and evaluation platforms. They let you download and execute your ADSP-21000 family programs in real time. EZ-ICE, an in-circuit emulator, provides a controlled environment for observing, debugging, and testing by directly connecting to the target processor through its (IEEE 1149.1) JTAG interface. The ICEPAC, a small daughter card, incorporates embedded emulation functionality that effectively adds all of the capabilities of the EZ-ICE to your PC plug-in target board. The EZ-KIT for the ADSP-2106x SHARC and the EZ-KIT Plus for the ADSP-21020 include the EZ-LAB Development Board, the ADSP-21000 Family Development Software, the C Compiler, C Runtime Library, and the CBUG Source Level Debugger.

IBM-AT 386-based or greater AT with 4 MB DRAM DOS 3.1 or higher; Windows 3.1 or higher EGA or VGA Monitor and color video card 3.5" HD Floppy Disk Drive Minimum 11 MB free hard disk drive space

Sun4 SunOS 4.1.1 for UNIX software; Windows version software compatible in Windows emulation mode High resolution color monitor 3.5" HD Floppy Disk Drive Minimum 19 MB free hard disk drive space

The Assembler reads ADSP-21000 Family assembly language source files and generates a relocatable object file. It includes a preprocessor that lets you use the C preprocessor directives #define, #include, #if, #ifdef, and #else in assembly code. Assembler directives define code modules, data buffers, data variables, and memory mapped I/O ports. Both the assembler and C preprocessor have directives to define macros. Programming in assembly language is eased by the highly readable algebraic syntax of the ADSP-21000 Family instruction set. An add instruction, for example, is written in the same manner as the actual equation: The algebraic statement is coded in assembly language + f2).

The Simulator, a software model of the DSP, provides instructionlevel simulation of program execution. It models system memory and I/O according to the contents of the system architecture file, and displays hardware registers and memory in separate data windows (see Figure 1). The standard Windows Graphical User Interface (GUI) provides additional reconfigurable windows that display and let you alter register and memory contents, making a powerful debugging environment. The Simulator also reads symbols to perform symbolic debugging. A separate Simulator is provided for ADSP-2106x class DSPs and for ADSP-21020 class DSPs.

The Linker processes separately assembled object and library files to create a single executable program. It assigns memory locations to code and data according to user defined architecture files--text files that describe the memory configuration of the target system. The Linker generates symbols (variable names and program labels) in the processed files that are used by the simulator and emulator to perform symbolic debugging.

Display of all registers, caches, and stacks Integration with CBUG C Source-Level Debugger Single step execution Interrupt simulation Plotting memory Break points and break conditions Simulation of program and data memory.

The Assembly Library contains standard arithmetic and DSP routines accessible to your programs. You can create libraries of your own functions using the Librarian tool.

Known for its efficiency and reliability, the GNU-based Optimizing G21K C Compiler supports in-line assembly code, using the asm( ) construct, and generates COFF (Common Object Format Files), an industry standard file format for object, library, and executable files.

Figure 1. ADSP-21000 Family Simulator and Emulator User Interface


Some Part number from the same manufacture Analog Devices
ADE7751 Single Phase Energy Metering ic With On-chip Fault Detection
ADE7752 Three Phase Energy Metering ic With Pulse Output
ADE7753 Multi-functional Single Phase Energy Metering ic With Serial Interface
ADE7754 Three Phase Active Energy Metering ic With Serial Interface
ADE7755 Single Phase Energy Metering ic With Synchronized Pulse Output
ADE7755AN-REF Energy Metering ic With Pulse Output
ADE7755ARS Single Phase Energy Metering ic With Synchronized Pulse Output
ADE7755ARSRL Energy Metering ic With Pulse Output
ADE7756 Transducer Interface For Remote Reading or Multiple Rate Billing Energy Meters
ADE7757 Energy Metering ic With Integrated Oscillator
ADE7758 Polyphase Multi-function Energy Metering ic With Per Phase Information (Serial Port Interface)
ADE7759 Single-phase Metering ic With Di/dt Input (Serial-Port Interface)
ADE7760 Single Phase Energy Metering ic With On-chip Fault Detection And Integrated Oscillator
ADE7761 Single Phase Energy Metering ic With On-chip Fault Detection And Missing Neutral Detection
ADE7763 Single Phase Active And Apparent Energy Metering ic With Di/dt Input (Serial-Port Interface)

AAT3132 : High Efficiency 1.5X Fractional Charge Pump For White Led Applications.the AAT3132 is a Low Noise, Constant Frequencycharge Pump DC/DC Converter That Uses Fractional(1.5X) Conversion to Maximize Efficiency For Whiteled Applications. The Device CAN be Used to Producecurr

ADR395 : 4.096 V Precision Voltage Reference

ADSP-2173 : 16-bit, 33 Mips, 5v, 2 Serial Ports, Host Port

AME8510AEEVKFX26 : Watchdog Micropower P Watchdog Timer

ADP1828YRQZ-R7 : Synchronous Buck PWM, Step-Down, DC-to-DC Controller The ADP1828 is a versatile and synchronous PWM voltage mode buck controller. It drives an all N-channel power stage to regulate an output voltage as low as 0.6 V to 85% of the input voltage and is sized to handle large MOSFETs for point-of-load r

AD8228ARMZ-RL : Precision Instrumentation Amplifier Fixed G = 10, 100 The AD8228 is a high performance instrumentation amplifier with very high gain accuracy and low drift. Because all gain-setting resistors are internal and laser trimmed, gain accuracy and gain drift are higher than can be achieved with typical i

AIC1722A-33CXTBG : 300ma Low Dropout Linear Regulator

ADG465BRTZ-REEL7 : Tv - Other Composition Circuit Protection - -; IC CHANNEL PROTECTOR SGL SOT23-6 Specifications: Package / Case: SOT-23-6 ; Packaging: Cut Tape (CT) ; Technology: Mixed Technology ; Applications: General Purpose ; Number of Circuits: 1 ; Voltage - Working: - ; Voltage - Clamping: 40V ; Power (Watts): - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

MH88636-4 : . Central Office Interface Circuit Preliminary Information Loop Start Trunk Interface 900 Input Impedance 2-4 Wire Conversion On-Hook Reception Line State Detection Outputs: - Forward Loop - Reverse Loop - Switch Hook - Ringing Voltage Relay Driver Industrial Temperature Range option DIL and SMT versions Meets FCC part 68 Leakage Current Requirements.

SKD33 : Power Bridge Rectifier. ID, IDCL (Th 1) C) Tamb = 45 C; isolated 2) chassis R4A/120 P1A/120 Tamb = 35 C, P1A/120F IFSM i2t VF V(TO) rT IRD Rthjh Rthja Tvj = 25 C; 10 ms Tvj = 150 C; 10 ms Tvj = 25 C; 10 ms Tvj = 150 C; 10 ms Tvj = 25 C; (IF A); max. Tvj 150 C Tvj 150 C Tvj = 25 C; VRD = VRRM Tvj = 150 C; VRD = VRRM per diode total isolated 2) chassis P1A/120 P1A/120F.

TC90A49F : . TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC The a 3-line digital / C (luminance / chrominance) separation IC for PAL, NTSC, M-PAL and N-PAL format. TV format : NTSC (3.58), PAL, M-PAL, and N-PAL Dynamic comb filter Vertical edge enhancement circuit PLL 8 multiplier circuit Internal 8-bit 4 fsc AD converter Internal 8-bit precision 8 fsc DA converter.

ZU3DU : Location Device Cable Avoidance.

ASA00B18-L : ASA 6W Series. Total Power: 6 Watts Input Voltage: # of Outputs: Single, Dual Input range to 36 VDC; to 75 VDC 2.0% 0.5% Single output: @ 3.3Vo Other: 0.5% Dual output: 15Vo: 150mV Auto-restart 250KHz 0.02 /C 1500 VDC min. 10Mohm 1000pF Encapsulated Wide 4:1 input range X 0.8" DIP package 1500Vdc I/O isolation Single and Dual output Voltage tolerance Line regulation.

TPS616_07 : Silicon NPN Epitaxial Planar. Lead(Pb)-Free Floppy Disk Drive VCR Position Detector Of Home Electric Equipment Opto-electronic Switch 3.1mm epoxy resin package. (black) Light current: = 10A (min.) = 0.1mW/cm2 Half value angle: = 30 (typ.) Protected from external light by black mold packaging. Characteristic Collector-emitter voltage Emitter-collector voltage Collector current.

66WFR200KLF : 3/8 Square Multiturn Cermet Trimming Potentiometer. Standard Resistance Range, Ohms Standard Resistance Tolerance Input Voltage, Maximum Slider Current, Maximum Power Rating, Watts End Resistance, Maximum Actual Electrical Travel, Turns, Nominal Dielectric Strength Insulation Resistance, Minimum Resolution Contact Resistance Variation, Maximum 10% (<100 Ohms 20%) 200 Vdc or rms not to exceed power.

CHIMH5PT : NPN Digital Silicon Transistor. APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-74/SOT-457) * High current gain. * Suitable for high packing density. Low colloector-emitter saturation. High saturation current capability. two CHDTC124E chips in one package. Built in bias resistor(R1=22k, Typ. ) LIMITING VALUES.

HAT3018R : Silicon N/P Channel Power MOS FET High Speed Power Switching. Silicon N/P Channel Power MOS FET High Speed Power Switching Low on-resistance Capable 4.5 V gate drive High density mounting "J" is for Automotive application High temperature D-S leakage guarantee Avalanche rating Ratings Item Symbol HAT3018R Nch Drain to source voltage Gate to source voltage Drain current Drain peak current Avalanche current Avalanche.

GPSIM15 : Rf Antenna Rf/if And Rfid; ANTENNA GPS 2.5DB 1575.42MHZ. s: Frequency: 1575.42MHz ; Number of Bands: 1 ; Mounting Type: - ; Packaging: * ; VSWR: - ; Antenna Type: Flat Patch ; Height (Max): 0.25" (6.3mm) ; Termination: SMA ; Gain: 2.5dBi ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

186 : BANANA PLUG, 25A, STUD. s: Connector Type: Banana Plug ; Series: - ; Gender: Plug ; Contact Termination: Stud / Turret ; Current Rating: 25A ; Voltage Rating: - ; Contact Plating: Nickel ; Contact Material: Beryllium Copper ; Connector Color: - ; Connector Mounting: Panel.

52015730 : CABLE GLAND, METAL, PG13.5. s: Accessory Type: Gland ; Cable Gland Material: Brass ; For Use With: Manufacturing of Machineries and Equipments ; Cable Diameter: 12mm ; Gland Color: Silver ; IP/NEMA Rating: IP68 ; Thread Size - Imperial: - ; Thread Size - Metric: PG13.5.

AT056 : Switch Hardware 12MM DRESS CAP NUT M12-P1 CHROME. s: Manufacturer: NKK Switches ; Product Category: Switch Hardware ; RoHS:  Details ; For Use With: Toggle Switches ; Type: Nuts ; Designed for: M, P, S Series ; Height: 4.27 mm ; Length: 14 mm ; Material: Brass with Chrome Plating ; Mounting Style: SMD/SMT ; Series: AT ; Termination Style: Screw.

A3DDA-2606M : Socket to Socket Rectangular Cable Assembly 0.500' (152.40mm, 6.00") Polarizing Key, Strain Relief; IDC CABLE- AKP26A/ AE26M / AKP26. s: Connector Type: Socket to Socket ; Number of Positions: 26 ; Contact Finish: Gold ; Number of Rows: 2 ; : Polarizing Key, Strain Relief ; Color: Multiple, Ribbon ; Length: 0.500' (152.40mm, 6.00") ; Usage: - ; Shielding:.

7445720 : Fixed Inductors, Coils, Choke 100H 2A 0.866" L x 0.591" W x 0.276" H (22.00mm x 15.00mm x 7.00mm) -; INDUCTOR POWER 100UH 2.0A SMD. s: Inductance: 100H ; Tolerance: 10% ; Package / Case: 0.866" L x 0.591" W x 0.276" H (22.00mm x 15.00mm x 7.00mm) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 2A ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency.

DC-ME-Y413-LX-B : Embedded - Microcontroller Or Microprocessor Module Integrated Circuit (ics) Device Server; ME 9210 16MB SDRAM 8MB FLASH. s: For Use With/Related Products: Networking ; Module/Board Type: Device Server ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

3-647628-9 : Gold Through Hole, Right Angle Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded; 09P MTA100 HDR FLRAFB LF. s: Color: Black ; Connector Type: Header, Unshrouded ; Contact Finish: Gold ; Contact Mating Length: 0.290" (7.37mm) ; : - ; Mounting Type: Through Hole, Right Angle ; Number of Positions Loaded: All ; Number of Rows:.

S300CG4-12V/30-N : SINGLE COLOR LED, GREEN, 10.1 mm. s: LED Type: Green.

V5A11 : RESISTOR, NETWORK, FILM, DIVIDER, THROUGH HOLE MOUNT. s: Configuration: Chip Array ; Category / Application: General Use ; Mounting / Packaging: ThroughHole, SIP, LEAD/ROHS COMPLIANT ; Operating DC Voltage: 1200 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F).

1557-SK : 2000 MHz - 26000 MHz RF/MICROWAVE SGL POLE SGL THROW SWITCH, 2.9 dB INSERTION LOSS. s: Frequency Range: 2000 to 26000 MHz ; Insertion Loss: 2.9 dB ; VSWR: 2.1 1 ; Impedance: 50 ohms ; Type: Single Pole Single Throw ; Operating Temperature: -54 to 85 C (-65.2 to 185 F).

0-C     D-L     M-R     S-Z