Details, datasheet, quote on part number: DS9093A
CompanyDallas Semiconductor
DatasheetDownload DS9093A datasheet
Find where to buy


Features, Applications


Key ring mount version: - DS9093F snap-in fob for use with F5 MicroCanTM - DS9093N angled fob for use with F5 MicroCan - DS9093A snap-in angled fob for use with F5 MicroCan Two permanent mount versions: - DS9093S allows an iButton to be easily and permanently attached to an object using screws or rivets (F5 MicroCan) - DS9093P has a locating pin and a single mounting hole for permanent attachment (F5 MicroCan) Pre-punched hole mount: - DS9093RA lock ring firmly fastens F5 package - DS9093RB flange enlargement provides additional flange surface area if needed


The DS9093 iButton Mount Products offer the user low-cost fixtures that hold an iButton for thumbpad applications or permanent attachment to an object. The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability. The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton can be locked a DS9093RA Lock Ring. The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting. The DS9093A is available in black, blue, green, red and yellow.

The DS9093S and DS9093P allow the user to permanently attach an iButton to an object with one or two screws, rivets, etc. The plastic plate is designed with an inset that accommodates the flange of the F5 package and allows for flush mounting. A protective wall is provided along the sides of the plate to reduce incidental damage to the iButton.

The DS9093RA Lock Ring is a stainless steel fastener which provides an inexpensive method for firmly attaching an iButton to any item with a pre-punched hole. The iButton is inserted through the hole and is restrained by the flange on the iButton. The DS9093RA Lock Ring is crimped onto the portion of the iButton which protrudes through the hole. The optional DS9093RB Flange Enlargement is a thin stainless steel washer that provides additional surface area to improve retention of the iButton in materials that are very thin or flexible. The DS9093RB is formed with a slight dome to improve the gripping force exerted onto the pre-punched material. The domed side of the washer should face the flange of the iButton, the flat side should face the material.


Related products with the same datasheet
Some Part number from the same manufacture Dallas Semiconductor
DS9093F Ibutton
DS9097U-009 Universal 1-Wire Com Port Adapter
DS9502P Esd Protection Diode
DS9503P -
DS9503X Esd Protection Diode With Resistors
S1230AB-70 256k Nonvolatile SRAM
DS1249Y100 2048k Nonvolatile SRAM
DS18B20-SL Programmable Resolution 1-wire Digital Thermometer
DS3252N Single/dual/triple/quad Ds3/e3/sts-1 LIUs
DS2755 High-accuracy Battery Fuel Gauge with Snapshot
DS1330YL 256k Nonvolatile SRAM with Battery Monitor
DS1631+ High-precision Digital Thermometer and Thermostat
DS1844_05 Quad Digital Potentiometer
DS2250-32-16 Soft Microcontroller Module
DS2761BX High-precision Li+ Battery Monitor
DS14287+ Real-time Clock with NV RAM
DS1371U+ I2C, 32-bit Binary Counter
DS3251N Single/dual/triple/quad Ds3/e3/sts-1 LIUs

DS1230YP-70-IND : 256k Nonvolatile SRAM

DS1245Y-100 : SRAM 1024K Nonvolatile SRAM

DS1481S/TR : 1-Wire Bus Master With Overdrive

DS1706LEPA : Power -

DS1844-100 : Quad Digital Potentiometer

DS1904L-F5 : RTC Ibutton

DS2433S-Z01 : 4k-bit 1-wire EePROM

DS87C323-MCL : High-speed Microcontroller User Guide

DS1023S-025 : 8-bit Programmable Timing Element

DS3254N : Single/dual/triple/quad Ds3/e3/sts-1 LIUs

DS80C323-MNL : High-speed Microcontroller User Guide

Same catergory

CY7C09449PV-AC : 128 KB Dual-port SRAM With Pci Bus Controller (PCI-DP). Kb of dual-ported shared memory Master and Target PCI 2.2 compliant interface Embedded host bridge capability Direct interface to many microprocessors I2O message transport unit; includes four 32-bit, 32entry FIFO Local bus clock rates to 50 MHz Single 3.3V Power Supply including compatibility with 3V and 5V PCI Bus signaling 160-pin thin plastic quad.

SK100E445 : Converters. 4-Bit Serial / Parallel Converter. The is an integrated 4-bit serial-toparallel data converter. The device is designed to operate for NRZ data rates to 2.0 Gb/s. The chip generates a divide by 4 and a divide by 8 clock for both 4-bit conversion and a two chip 8-bit conversion function. The conversion sequence was chosen to convert the first serial bit to Q0, the second to Q1, etc. The start.

DMP4051LK3-13 : 40V P-channel Enhancement MODE Mosfet. Please click here to visit our online spice models database. Low on-resistance Fast switching speed "Green" component and RoHS compliant (Note 1) Case: TO252-3L Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 (Note 1) Moisture Sensitivity: Level 1 per J-STD-020D Terminals Connections: See Diagram.

DF1B-10S-2.5R : 2.5mm Pitch Connector for Discrete Wire Connection (product Compliant with Ul/csa Standard).

PLF3DZ2 : Emi/rfi Power LINE Filters PCB & Chassis Mount Filters. INTRODUCTION: Adam Tech PLF Series is a complete range of Power Line Filters designed for use in electric equipment that needs to meet FCC and other worldwide agency requirements for EMI/RFI emissions. This series offers numerous termination styles and levels of filtering and circuit protection for specific applications. Included are chassis mount,.

TBA8054 : Pigtailed PD for Analog Application. Long wavelength InGaAs PIN-PD Detection wavelength range to 1.6m SMF or MMF Pigtailed SC, FC, ST, or LC Connector InGaAs long wavelength PIN photodiode Operation & 1550nm High responsivity, low dark current and low capacitance Operating temperature to +85 Single-mode fiber or multimode fiber pigtailed with or FC connector The TxP4NN3 series is a reliable.

HB11201 : Breake Away Header .025(0.64mm) Square Posts.

PR3HG : Surface Mount Crystals 3.5 x 6.0 x 1.2 mm. Miniature low profile package & 4 Pad) RoHS Compliant Wide frequency range PCMCIA - high density PCB assemblies PR (2 Pad) PP (4 Pad) MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see for our complete.

ECJ-2VC1H070D : 7.0pF Ceramic Capacitor 0805 (2012 Metric) 50V; CAP 7.0PF 50V CERM CHIP 0805 SMD. s: Capacitance: 7.0pF ; Voltage - Rated: 50V ; Tolerance: 0.5pF ; Package / Case: 0805 (2012 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Cut Tape (CT) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

GRM1886P1H3R5CZ01D : 3.5pF Ceramic Capacitor 0603 (1608 Metric) 50V; CAP CER 3.5PF 50V P2H 0603. s: Capacitance: 3.5pF ; Voltage - Rated: 50V ; Tolerance: 0.25pF ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: P2H ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

LAL03VBR68M : Fixed Inductors, Coils, Choke 680nH 310mA Axial -; INDUCTOR .68UH 310MA AXIAL LEAD. s: Inductance: 680nH ; Tolerance: 20% ; Package / Case: Axial ; Packaging: Tray ; Type: - ; Current: 310mA ; Mounting Type: Through Hole ; Q @ Freq: - ; Frequency - Self Resonant: 190MHz ; DC Resistance (DCR): 670 mOhm Max ; Shielding: Unshielded ; Applications: General.

1-1879265-6 : 158K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 158K OHM 1/4W 0.1% 1206. s: Resistance (Ohms): 158K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Thin Film ; Temperature Coefficient: 15ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MFR-25FBF-4K42 : 4.42K Ohm 0.25W, 1/4W Through Hole Resistors; RES 4.42K OHM 1/4W 1% METAL FILM. s: Resistance (Ohms): 4.42K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CT6EF104 : Ohm Trimmer Potentiometers, Variable Resistors Back Side Adjustment Single Turn; TRIMMER 100K OHM 0.5W TH. s: Resistance (Ohms): 100K ; Power (Watts): 0.5W, 1/2W ; Number of Turns: Single ; Adjustment Type: Back Side Adjustment ; Tolerance: 10% ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C ; Resistive Material: Cermet ; Packaging:.

DTC125TKAT146 : 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR. s: Polarity: NPN ; Package Type: SMT3, SC-59, 3 PIN.

IDT72V15160L10PFGI : 4K X 16 OTHER FIFO, 6.5 ns, PQFP80. s: Memory Category: FIFO ; Density: 66 kbits ; Number of Words: 4 k ; Bits per Word: 16 bits ; Package Type: TQFP, TQFP-80 ; Pins: 80 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F).

IRHM7064D : 35 A, 60 V, 0.021 ohm, N-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 60 volts ; rDS(on): 0.0210 ohms ; Package Type: HERMETIC SEALED, CERAMIC, TO-254AA, 3 PIN ; Number of units in IC: 1.

0-C     D-L     M-R     S-Z