Details, datasheet, quote on part number: 1513-20A
CategoryLogic => Delay Lines
DescriptionFixed Sip Delay Line
CompanyData Delay Devices, Inc.
DatasheetDownload 1513-20A datasheet


Features, Applications


Fast rise time for high frequency applications Very narrow device (SIP package) Stackable for PC board economy Low profile Epoxy encapsulated Meets or exceeds 1 2

The 1513-series device is a fixed, single-input, single-output, passive IN Signal Input delay line. The signal input (IN) is reproduced at the output (OUT), shifted OUT Signal Output by a time (TD) given by the device dash number. The characteristic GND Ground impedance of the line is given by the letter code that follows the dash number (See Table). The rise time (TR) of the line 20% of TD, and the 3dB bandwidth is given 1.75 / TD.

Dielectric breakdown: Distortion @ output: Operating temperature: Storage temperature: Temperature coefficient: 50 Vdc 10% max. +125C 100 PPM/C

3oC High = 3.0V typical Low = 0.0V typical Source Impedance: 50 Max. Rise/Fall Time: 3.0 ns Max. (measured at 10% and 90% levels) Pulse Width (TD 75ns): PWIN = 100ns Period (TD 75ns): PERIN = 1000ns Pulse Width (TD > 75ns): PWIN x TD Period (TD > 75ns): PERIN x TD INPUT: Ambient Temperature: Input Pulse: OUTPUT: Rload: Cload: Threshold: 10pf 50% (Rising & Falling)

NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.


Related products with the same datasheet
Some Part number from the same manufacture Data Delay Devices, Inc.
1513-20B Fixed Sip Delay Line
1515 Fixed Passive Sip Delay Line

1519-300D : Fixed 10-tap Passive Dip Delay Line

2211-40C : Fixed Dip Delay Line

DDU8C3-5008 : Fixed 5-tap Lvcmos Delay Line

MDU14-XXM : Quad, Ecl-interfaced Fixed Delay Line Series

PDU16F-XXM : 6-bit Programmable Delay Line

PDU54-200C4 : 4-bit, Ecl-interfaced Programmable Delay LINE (series Pdu54)

MDU13H-15M : Triple, Ecl-interfaced Fixed Delay LINE (series Mdu13h)

3D3324-30 : Monolithic Quadruple Fixed Delay LINE

1520B-30-3.0A : 10-tap Dip/smd Delay LINE Td/tr = 5

0-C     D-L     M-R     S-Z