Details, datasheet, quote on part number: P6KE11A
PartP6KE11A
Category
Description600W Transient Voltage Suppressor
CompanyDiodes, Inc.
DatasheetDownload P6KE11A datasheet
Cross ref.Similar parts: 1N6409, P6KE11, BZW03C11, 1.5KE13ARL4G, 1.5KE11ARL4G, BZW03-C11, BZW03C-11, BZW03D-11, BZW06-9V4
Quote
Find where to buy
 
  

 

Features, Applications

600W Peak Pulse Power Dissipation Voltage Range - 400V Constructed with Glass Passivated Die Uni- and Bidirectional Versions Available Excellent Clamping Capability Fast Response Time

Case: Transfer Molded Epoxy Leads: Plated Leads, Solderable per MIL-STD-202, Method 208 Marking: Unidirectional - Type Number and Cathode Band Marking: Bidirectional - Type Number Only Approx. Weight: 0.4 grams

= 25C unless otherwise specified Symbol Ppk Pd IFSM VF Tj, TSTG Value to +175 Unit C

Characteristic Peak Power Dissipation, 1.0 ms (Non repetitive current pulse, derated above = 25C) Steady State Power Dissipation = 75C Lead Lengths 9.5 mm (Mounted on Copper Land Area 40mm ) Peak Forward Surge Current, 8.3 ms Single Half Sine Wave, Superimposed on Rated Load (JEDEC Method) Duty Cycle = 4 pulses per minute maximum)

Forward Voltage 35A 300s Square Wave Pulse, Unidirectional Only Operating and Storage Temperature Range Notes:

1. Suffix `C' denotes bidirectional device. 2. For bidirectional devices having of 10 volts and under, the IR limit is doubled. 3. Type Number marking may contain a "V" or dash in place of decimal point.

1. Suffix `C' denotes bidirectional device. 2. For bidirectional devices having of 10 volts and under, the IR limit is doubled. 3. Type Number marking may contain a "V" or dash in place of decimal point.

VRWM, REVERSE STANDOFF VOLTAGE (V) Fig. 2 Typical Junction Capacitance
Tp, PULSE WIDTH (s) Fig. 3 Pulse Rating Curve
Single Phase Half-Wave 60Hz Resistive or Inductive Load

 

Related products with the same datasheet
P6KE100CA
P6KE10A
P6KE10CA
P6KE110A
P6KE110CA
P6KE11CA
P6KE120A
P6KE120CA
P6KE12A
P6KE12CA
P6KE130A
Some Part number from the same manufacture Diodes, Inc.
P6KE11CA 600W Transient Voltage Suppressor
P6KE6.8-400CA Transient Voltage Suppressor
P6KE6.8A 600W Transient Voltage Suppressor
P6KE6V8A Zener TVSS
P6KE7.5A 600W Transient Voltage Suppressor
P6KE7V5A Zener TVSS
P6KE8.2A 600W Transient Voltage Suppressor
P6KE8V2A Zener TVSS
P6KE9.1A 600W Transient Voltage Suppressor
P6KE9V1A Zener TVSS
PBL401 4.0A Bridge Rectifier
PBPC1001 10A Bridge Rectifier

B140 : 1.0A Surface Mount Schottky Barrier Rectifier

MMSZ5245B : 2.4V; 500mW Surface Mount Zener Diode. General Purpose; Ideally Suited For Automated Assembly Processes

PR3002G : Glass Passivated 3.0A Fast Recovery Glass Passivated Rectifier

DDTA143ZKA-7-F : PNP Pre-biased Small Signal Sot-323 Surface Mount Transistor

BAT42WS_04 : Surface Mount Schottky Barrier Diode

SMAJ28A-13 : Tv - Diode Circuit Protection 28V 400W; TVS UNI-DIR 28V 400W SMA Specifications: Package / Case: DO-214AC, SMA ; Packaging: Cut Tape (CT) ; Polarization: Unidirectional ; Power (Watts): 400W ; Voltage - Reverse Standoff (Typ): 28V ; Voltage - Breakdown: 31.1V ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

DDTA144WCA-7-F : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 30mA 50V 200mW PNP - Pre-Biased; TRANS PREBIAS PNP 200MW SOT23-3 Specifications: Transistor Type: PNP - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 30mA ; Power - Max: 200mW ; Resistor - Base (R1) (Ohms): 47K ; Resistor - Emitter Base (R2) (Ohms): 22K ; Vce Saturation (Max) @ Ib, Ic: 300mV @ 500A, 10mA ; Curren

1N4764A-T3 : 100 V, 1 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-41 Specifications: Diode Type: VOLTAGE REGULATOR DIODE

AH5772-P-B : Motor / Motion / Ignition Controllers & Drivers Hall Effect Sensor DC Motor Ctrl Diodes AH577x Single Phase Motor Drivers are a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to minimize audible switching noise and electromagnetic interference (EMI) providing a lo

 
0-C     D-L     M-R     S-Z