Details, datasheet, quote on part number: IDT7006S-25B
PartIDT7006S-25B
CategoryMemory => SRAM => SRAM
TitleMulti-Ports
Description16 K X 8 Dual-port RAM
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7006S-25B datasheet
  

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 20/25/35/55/70ns (max.) Industrial: 55ns (max.) Commercial: 15/17/20/25/35/55ns (max.) Low-power operation IDT7006S Active: 750mW (typ.) Standby: 5mW (typ.) IDT7006L Active: 700mW (typ.) Standby: 1mW (typ.) IDT7006 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than

one device M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave Busy and Interrupt Flags On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port Devices are capable of withstanding greater than 2001V electrostatic discharge Battery backup operation2V data retention TTL-compatible, single 5V (10%) power supply Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin TQFP Industrial temperature range +85C) is available for selected speeds

NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY outputs and INT outputs are non-tri-stated push-pull.

The is a high-speed x 8 Dual-Port Static RAM. The IDT7006 is designed to be used as a stand-alone 128K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down feature controlled by CE permits the on-chip circuitry of each port to enter

Description

a very low standby power mode. Fabricated using IDTs CMOS high-performance technology, these devices typically operate on only 750mW of power. Low-power (L) versions offer battery backup data retention capability with typical power consumption of 500W from a 2V battery. The IDT7006 is packaged in a ceramic 68-pin PGA, an 68-pin quad flatpack, a PLCC, and a 64-pin thin quad flatpack, TQFP. Military grade product is manufactured in compliance with the latest revision of MIL-PRF38535 QML, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability.


NOTES: 1. All VCC pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. J68-1 package body in x.95 in. x.17 in. F68-1 package body in x.08 in. PN64-1 package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part-marking


NOTES: 1. All VCC pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body is approximately in x.16 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part-marking

Left Port CEL R/ WL OEL - I/O7L SEML INTL BUSYL CER R/ WR OER - I/O7R SEMR INTR BUSYR M/S VCC GND Right Port Chip Enable Read/Write Enable Output Enable Address Data Input/Output Semaphore Enable Interrupt Flag Busy Flag Master or Slave Select Power Ground


 

Related products with the same datasheet
IDT7006
IDT7006L-15
IDT7006L-17
IDT7006L-20
IDT7006L-25
IDT7006L-25B
IDT7006L-35
IDT7006L-35B
IDT7006L-55
IDT7006L-55B
IDT7006L-70B
IDT7006L15F
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7006S-35 16 K X 8 Dual-port RAM
IDT7006S15FB High-speed 16k X 8 Dual-port Static RAM
IDT7006S15G 16 K X 8 Dual-port RAM
IDT7006S15GB High-speed 16k X 8 Dual-port Static RAM
IDT7006S15J 16 K X 8 Dual-port RAM
IDT7006S15JB High-speed 16k X 8 Dual-port Static RAM
IDT7006S15PF 16 K X 8 Dual-port RAM
IDT7006S15PFB High-speed 16k X 8 Dual-port Static RAM
IDT7006S17F 16 K X 8 Dual-port RAM
IDT7006S17FB High-speed 16k X 8 Dual-port Static RAM
IDT7006S17G 16 K X 8 Dual-port RAM
IDT7006S17GB High-speed 16k X 8 Dual-port Static RAM
IDT7006S17J 16 K X 8 Dual-port RAM
IDT7006S17JB High-speed 16k X 8 Dual-port Static RAM
IDT7006S17PF 16 K X 8 Dual-port RAM
IDT7006S17PFB High-speed 16k X 8 Dual-port Static RAM
IDT7006S20F 16 K X 8 Dual-port RAM
IDT7006S70F High-speed 16k X 8 Dual-port Static RAM
IDT7006S70FB 16 K X 8 Dual-port RAM
IDT7006S70G High-speed 16k X 8 Dual-port Static RAM
IDT7006S70GB 16 K X 8 Dual-port RAM

IDT54FCT377ATQ : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS Octal D Flip-flop With Clock Enable

IDT72V06L-15 : 3.3v CMOS Asynchronous Fifo 512x9; 1,024x9; 2,048x9; 4,096x9; 8,192x9; 16,384x9

IDT74FCT16827AT : Bus Oriented Circuits Fast CMOS 20-bit Buffer

IDT74FCT2157CTPB : Fast CMOS Quad 2-input Multiplexer

ICS557M-01T : Clock/timing - Application Specific Integrated Circuit (ics) Clock/Frequency Generator Tube 3.135 V ~ 3.465 V; IC CLK SOURCE PCI EXPRESS 8-SOIC Specifications: Type: Clock/Frequency Generator ; PLL: Yes ; Main Purpose: PCI Express (PCIe) ; Input: Clock, Crystal ; Output: HCSL, LVDS ; Number of Circuits: 1 ; Ratio - Input Output: 1 1 ; Differential - Input Output: No/Yes ; Frequency - Max: 100MHz ; Voltage - Supply: 3.135 V ~ 3.465 V ; Opera

LDS6124NQGI8 : Data Acquisition - Touch Screen Controller Integrated Circuit (ics) Capacitive, Keypad LED Driver; IC SENSOR TCH PURETOUCH 28VFQFPN Specifications: Type: Capacitive, Keypad LED Driver ; Touch Panel Interface: - ; Data Interface: I²C, Serial, SMBus, SPI ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

IDT70V7399S133BF : 256K X 18 DUAL-PORT SRAM, 15 ns, PBGA256 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 256 k ; Bits per Word: 18 bits ; Package Type: BGA, BGA-256 ; Pins: 256 ; Supply Voltage: 3.3V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7132SA25PGI : 2K X 8 DUAL-PORT SRAM, 25 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: DIP, 0.620 X 2.430 INCH, 0.150 INCH HEIGHT, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (

844202BK-245LFT : OTHER CLOCK GENERATOR, QCC32 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, 5 X 5 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, MO-220VHHD-2, VFQFN-32 ; Supply Voltage: 3.14 to 3.46 volts ; Frequency: 35 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

859S0424BGILFT : 859S SERIES, LOW SKEW CLOCK DRIVER, 4 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, TSSOP, 4.40 X 7.80 MM, 0.925 MM HEIGHT, MO-153, TSSOP-24 ; Supply Voltage: 3.14 to 3.46 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z