Details, datasheet, quote on part number: IDT7007
PartIDT7007
CategoryMemory => Multiport->256K
TitleMulti-Ports
Description32K X 8 Dual-port RAM
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7007 datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 25/35/55ns (max.) Industrial: 55ns (max.) Commercial: 15/20/25/35/55ns (max.) Low-power operation IDT7007S Active: 850mW (typ.) Standby: 5mW (typ.) IDT7007L Active: 850mW (typ.) Standby: 1mW (typ.) IDT7007 easily expands data bus width to 16 bits or more

using the Master/Slave select when cascading more than one device M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave Interrupt Flag On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port TTL-compatible, single 5V (10%) power supply Available in 68-pin PGA and PLCC and a 80-pin TQFP Industrial temperature range +85C) is available for selected speeds

NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY and INT outputs are non-tri-stated push-pull.

Description

The is a high-speed x 8 Dual-Port Static RAM. The IDT7007 is designed to be used as a stand-alone 256K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down

feature controlled by CE permits the on-chip circuitry of each port to enter a very LOW standby power mode. Fabricated using IDTs CMOS high-performance technology, these devices typically operate on only 850mW of power. The IDT7007 is packaged a 68-pin pin PGA, a 68-pin PLCC, and an 80-pin thin quad flatpack, TQFP. Military grade product is manufactured in compliance with the latest revision of MIL-PRF-38535 QML, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body in x.17 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.


 

Related products with the same datasheet
IDT7007L-15
IDT7007L-20
IDT7007L-25
IDT7007L-25B
IDT7007L-35
IDT7007L-35B
IDT7007L-55
IDT7007L-55B
IDT7007L15J
IDT7007L15PF
IDT7007L20G
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7007L High-speed 32k X 8 Dual-port Static RAM
IDT7007L-15 32K X 8 Dual-port RAM
IDT7007L20GB High-speed 32k X 8 Dual-port Static RAM
IDT7007L20J 32K X 8 Dual-port RAM
IDT7007L20JB High-speed 32k X 8 Dual-port Static RAM
IDT7007L20PF 32K X 8 Dual-port RAM
IDT7007L20PFB High-speed 32k X 8 Dual-port Static RAM
IDT7007L25G 32K X 8 Dual-port RAM
IDT7007S High-speed 32k X 8 Dual-port Static RAM
IDT7007S-15 32K X 8 Dual-port RAM
IDT7007S20GB High-speed 32k X 8 Dual-port Static RAM
IDT7007S20J 32K X 8 Dual-port RAM
IDT7007S20JB High-speed 32k X 8 Dual-port Static RAM
IDT7007S20PF 32K X 8 Dual-port RAM
IDT7007S20PFB High-speed 32k X 8 Dual-port Static RAM
IDT7007S25G 32K X 8 Dual-port RAM
IDT7008 64K X 8 Dual-port RAM
IDT7009 128K X 8 Dual-port RAM
IDT7009L High-speed 128k X 8 Dual-port Static RAM
IDT7009L15PF 128K X 8 Dual-port RAM
IDT70121 Dual-port RAM Master: 2kx9

7MMV4101 : 128K X 24 Three Megabit 3.3V CMOS Static RAM

IDT74FCT138CTSOB : 1-of-8 Decoder

IDT74FCT166H244CTPVB : Fast CMOS 16-bit Buffer/line Driver

IDT7025S55PFB : 8K X 16 DUAL-PORT SRAM, 15 ns, QFP84 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 8 k ; Bits per Word: 16 bits ; Package Type: FP-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72241L35L8 : 4K X 8 OTHER FIFO, 6.5 ns, UUC28 Specifications: Memory Category: FIFO ; Density: 33 kbits ; Number of Words: 4 k ; Bits per Word: 8 bits ; Package Type: DIE ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

70V659S15BFGI : 128K X 36 DUAL-PORT SRAM, 10 ns, PBGA256 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, 17 X 17 MM, 1.40 MM HEIGHT, 1 MM PITCH, BGA-256 ; Pins: 256 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Operating Temperature: 0 to 70 C (32

71V2558S100PFGI : 256K X 18 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 256 k ; Bits per Word: 18 bits ; Package Type: BGA, 22 X 14 MM, ROHS COMPLIANT, PLASTIC, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70

71V424S15YG : 512K X 8 STANDARD SRAM, 10 ns, PDSO44 Specifications: Memory Category: SRAM Chip ; Density: 4194 kbits ; Number of Words: 512 k ; Bits per Word: 8 bits ; Package Type: TSOP, 0.400 INCH, TSOP2-44 ; Pins: 44 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z