Details, datasheet, quote on part number: IDT7007L25PFB
PartIDT7007L25PFB
CategoryMemory => Memory Chips => 6477159
Title32K X 8 DUAL-PORT SRAM, 15 ns, CPGA68
Description
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7007L25PFB datasheet
Quote
Find where to buy
 
Specifications 
Memory CategorySRAM Chip
Density262 kbits
Number of Words32 k
Bits per Word8 bits
Package Type1.800 X 1.800 INCH, 0.160 INCH HEIGHT, GREEN, PGA-68
Pins68
Logic FamilyCMOS
Supply Voltage5V
Access Time15 ns
Operating Temperature0 to 70 C (32 to 158 F)

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 25/35/55ns (max.) Industrial: 20/25/35/55ns (max.) Commercial: 15/20/25/35/55ns (max.) Low-power operation IDT7007S Active: 850mW (typ.) Standby: 5mW (typ.) IDT7007L Active: 850mW (typ.) Standby: 1mW (typ.) IDT7007 easily expands data bus width to 16 bits or more

using the Master/Slave select when cascading more than one device M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave Interrupt Flag On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port TTL-compatible, single 5V (10%) power supply Available in 68-pin PGA and PLCC and a 80-pin TQFP Industrial temperature range +85C) is available for selected speeds Green parts available, see ordering information

NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY and INT outputs are non-tri-stated push-pull.

Description

The is a high-speed x 8 Dual-Port Static RAM. The IDT7007 is designed to be used as a stand-alone 256K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down

feature controlled by CE permits the on-chip circuitry of each port to enter a very LOW standby power mode. Fabricated using IDT's CMOS high-performance technology, these devices typically operate on only 850mW of power. The IDT7007 is packaged a 68-pin pin PGA, a 68-pin PLCC, and an 80-pin thin quad flatpack, TQFP. Military grade product is manufactured in compliance with the latest revision of MIL-PRF-38535 QML, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground. 3. Package body in x.17 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground. 3. Package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.


 

Related products with the same datasheet
IDT7007L15J
IDT7007L15J8
IDT7007L15JG
IDT7007L15PF
IDT7007L15PF8
IDT7007L15PF9
IDT7007L15PFG
IDT7007L20
IDT7007L20G
IDT7007L20GG
IDT7007L20GGI
IDT7007L20GI
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7007L25PFG Specifications: Memory Category: SRAM Chip ; Density: 262 kbits ; Number of Words: 32 k ; Bits per Word: 8 bits ; Package Type: 1.800 X 1.800 INCH, 0.160 INCH HEIGHT, GREEN, PGA-68 ; Pins: 68 ; Logic Family:
IDT7007S15GG

IDT72V253L7-5BC : 512 X 18 / 1K X 9 Supersync ii Fifo, 3.3V

IDT74FCT646ADB : Fast CMOS Octal Transceiver/register

IDT74FCT810CTSO : Fast CMOS Buffer/clock Driver

IDT709079L15PF : High-speed 128K x 8 Synchronous Pipelined Dual-port Static RAM

IDT72V211L15J8 : 3.3v CMOS Syncfifo(tm) 256x9; 512x9; 1,024x9; 2,048x9; 4,096x9 And 8,192x9

IDT79R3051E-33PH : 32-BIT, 50 MHz, RISC PROCESSOR Specifications: Architecture: RISC ; Clock Speed: 50 MHz

IDTUS4717AHG8 : DUAL 1-CHANNEL, SGL POLE DOUBLE THROW SWITCH, BGA10 Specifications: Applications: Commercial ; Supply Voltage (VS): 1.65 to 5.5 volts ; Ron: 4.5 ohms ; tON: 30 ns ; tOFF: 40 ns ; VISO: 55 dB ; &nb916;RON: 0.1000 ohms ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Package Type: UCSP, 0.50 MM PITCH, UCSP-10 ; Number of Pins: 10 ; Number of Device

7140SA100PFG : 1K X 8 DUAL-PORT SRAM, 100 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 8 kbits ; Number of Words: 1 k ; Bits per Word: 8 bits ; Package Type: DIP, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 100 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z