Details, datasheet, quote on part number: IDT7007S-35B
PartIDT7007S-35B
CategoryMemory => SRAM => SRAM
TitleMulti-Ports
Description32K X 8 Dual-port RAM
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7007S-35B datasheet
  

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 25/35/55ns (max.) Industrial: 55ns (max.) Commercial: 15/20/25/35/55ns (max.) Low-power operation IDT7007S Active: 850mW (typ.) Standby: 5mW (typ.) IDT7007L Active: 850mW (typ.) Standby: 1mW (typ.) IDT7007 easily expands data bus width to 16 bits or more

using the Master/Slave select when cascading more than one device M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave Interrupt Flag On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port TTL-compatible, single 5V (10%) power supply Available in 68-pin PGA and PLCC and a 80-pin TQFP Industrial temperature range +85C) is available for selected speeds

NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY and INT outputs are non-tri-stated push-pull.

Description

The is a high-speed x 8 Dual-Port Static RAM. The IDT7007 is designed to be used as a stand-alone 256K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down

feature controlled by CE permits the on-chip circuitry of each port to enter a very LOW standby power mode. Fabricated using IDTs CMOS high-performance technology, these devices typically operate on only 850mW of power. The IDT7007 is packaged a 68-pin pin PGA, a 68-pin PLCC, and an 80-pin thin quad flatpack, TQFP. Military grade product is manufactured in compliance with the latest revision of MIL-PRF-38535 QML, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body in x.17 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.


 

Related products with the same datasheet
IDT7007
IDT7007L-15
IDT7007L-20
IDT7007L-25
IDT7007L-25B
IDT7007L-35
IDT7007L-35B
IDT7007L-55
IDT7007L-55B
IDT7007L15J
IDT7007L15PF
IDT7007L20G
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7007S-55 32K X 8 Dual-port RAM
IDT7007S20GB High-speed 32k X 8 Dual-port Static RAM
IDT7007S20J 32K X 8 Dual-port RAM
IDT7007S20JB High-speed 32k X 8 Dual-port Static RAM
IDT7007S20PF 32K X 8 Dual-port RAM
IDT7007S20PFB High-speed 32k X 8 Dual-port Static RAM
IDT7007S25G 32K X 8 Dual-port RAM
IDT7008 64K X 8 Dual-port RAM
IDT7009 128K X 8 Dual-port RAM
IDT7009L High-speed 128k X 8 Dual-port Static RAM
IDT7009L15PF 128K X 8 Dual-port RAM
IDT70121 Dual-port RAM Master: 2kx9
IDT70121L High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70121L-25 Dual-port RAM Master: 2kx9
IDT70121S High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70121S-25 Dual-port RAM Master: 2kx9
IDT70125L High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70125L-25 Dual-port RAM Master: 2kx9
IDT70125S High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70125S-25 Dual-port RAM Master: 2kx9
IDT7014 4K X 9 Dual-port RAM

IDT71024S20Y : 128K X 8 CMOS Static RAM With Corner Power & Ground Pinout

IDT72801L25PF : 256 X 9 Dualsync Fifo, 5.0V

IDTQS32245 : Quickswitch Products 2.5v/3.3v 20-bit HIGH Bandwidth BUS Switch

IDT72200L15TPG : CMOS Syncfifoo 256 x 18, 512 x 18, 1024 x 18, 2048 x 18 and 4096 x 18

IDTSTAC9202X3TAEA1X : Interface - Codec Integrated Circuit (ics) Audio Codec, HD Tray 3.14 V ~ 3.47 V; 3.8 V ~ 4.2 V; 4.28 V ~ 4.73 V; 4.75 V ~ 5.25 V; IC AUDIO CODEC 2CH HD 48-LQFP Specifications: Type: Audio Codec, HD ; Number of ADCs / DACs: 2 / 2 ; Dynamic Range, ADCs / DACs (db) Typ: 88 / 99 ; S/N Ratio, ADCs / DACs (db) Typ: 89 / 100 ; Resolution (Bits): 24 b ; Voltage - Supply, Analog: 3.14 V ~ 3.47 V; 3.8 V ~ 4.2 V; 4.28 V ~ 4.73 V; 4.75 V ~ 5.25 V ; Voltage - Supply, D

IDT70V24S20PFI : 4K X 16 DUAL-PORT SRAM, 15 ns, CPGA84 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 4 k ; Bits per Word: 16 bits ; Package Type: 1.120 X 1.120 INCH, 0.160 INCH HEIGHT, GREEN, CERAMIC, PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C

IDT72205LB25JI8 : 256 X 8 OTHER FIFO, 6.5 ns, UUC28 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 8 bits ; Package Type: DIE ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

97U870AKI : 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), QCC40 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, MLF-40 ; Supply Voltage: 1.7 to 1.9 volts ; Skew: 40 ps ; Frequency: 350 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z