Details, datasheet, quote on part number: IDT7007S55JB
PartIDT7007S55JB
CategoryMemory => Memory Chips => 6477256
Title32K X 8 DUAL-PORT SRAM, 15 ns, CPGA68
Description
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7007S55JB datasheet
Quote
Find where to buy
 
Specifications 
Memory CategorySRAM Chip
Density262 kbits
Number of Words32 k
Bits per Word8 bits
Package Type1.800 X 1.800 INCH, 0.160 INCH HEIGHT, GREEN, PGA-68
Pins68
Logic FamilyCMOS
Supply Voltage5V
Access Time15 ns
Operating Temperature0 to 70 C (32 to 158 F)

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 25/35/55ns (max.) Industrial: 20/25/35/55ns (max.) Commercial: 15/20/25/35/55ns (max.) Low-power operation IDT7007S Active: 850mW (typ.) Standby: 5mW (typ.) IDT7007L Active: 850mW (typ.) Standby: 1mW (typ.) IDT7007 easily expands data bus width to 16 bits or more

using the Master/Slave select when cascading more than one device M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave Interrupt Flag On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port TTL-compatible, single 5V (10%) power supply Available in 68-pin PGA and PLCC and a 80-pin TQFP Industrial temperature range +85C) is available for selected speeds Green parts available, see ordering information

NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY and INT outputs are non-tri-stated push-pull.

Description

The is a high-speed x 8 Dual-Port Static RAM. The IDT7007 is designed to be used as a stand-alone 256K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down

feature controlled by CE permits the on-chip circuitry of each port to enter a very LOW standby power mode. Fabricated using IDT's CMOS high-performance technology, these devices typically operate on only 850mW of power. The IDT7007 is packaged a 68-pin pin PGA, a 68-pin PLCC, and an 80-pin thin quad flatpack, TQFP. Military grade product is manufactured in compliance with the latest revision of MIL-PRF-38535 QML, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground. 3. Package body in x.17 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.

NOTES: 1. All Vcc pins must be connected to power supply. 2. All GND pins must be connected to ground. 3. Package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part marking.


 

Related products with the same datasheet
IDT7007S15J
IDT7007S15J8
IDT7007S15JG
IDT7007S15PF
IDT7007S15PF8
IDT7007S15PF9
IDT7007S15PFG
IDT7007S20
IDT7007S20G
IDT7007S20GG
IDT7007S20GGI
IDT7007S20GI
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7007S55JG Specifications: Memory Category: SRAM Chip ; Density: 262 kbits ; Number of Words: 32 k ; Bits per Word: 8 bits ; Package Type: 1.800 X 1.800 INCH, 0.160 INCH HEIGHT, GREEN, PGA-68 ; Pins: 68 ; Logic Family:
IDT7008L15G Specifications: Memory Category: SRAM Chip ; Density: 524 kbits ; Number of Words: 64 k ; Bits per Word: 8 bits ; Package Type: 1.12 X 1.12 INCH, 0.16 INCH HEIGHT, PGA-84 ; Pins: 84 ; Logic Family: CMOS
IDT7008S15JG

IDT74FCT166H244CTPA : Fast CMOS 16-bit Buffer/line Driver

IDT71V416VL : 32K x 32 3.3V Synchronous SRAM Flow-through Outputs

IDT70V7399S133BFI : High-speed 3.3V 128K x 36 Synchronous Bank-switchable Dual-port Static RAM WITH 3.3V OR 2.5V Interface

IDT54540CTDB : FAST CMOS Octal Buffer/line Drivers

IDT72T1845L10BBI : 2.5 VOLT High-speed Terasync FIFO 18-bit/9-bit Configurations

IDT71V35761S166BGG8 : 3.3V 128K X 36 Synchronous Pipelined Burst SRAM W/3.3V I/o

IDT5V991A-5JGI : PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, SOIC, 0.300 INCH, SOIC-24 ; Supply Voltage: 3 to 3.6 volts ; Skew: 250 ps ; Frequency: 85 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT70825L45PFG8 : 8K X 16 STANDARD SRAM, 20 ns, PQFP80 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 8 k ; Bits per Word: 16 bits ; Package Type: TQFP, TQFP-80 ; Pins: 80 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7133LA35GB : 2K X 16 MULTI-PORT SRAM, 45 ns, CQFP68 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 2 k ; Bits per Word: 16 bits ; Package Type: QFP, QFP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 45 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72285L15PF8 : 64K X 18 OTHER FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 1180 kbits ; Number of Words: 64 k ; Bits per Word: 18 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT79RC32V364-133DAI8 : 32-BIT, 150 MHz, RISC MICROCONTROLLER, PQFP208 Specifications: Data Bus: 32 Bit ; Life Cycle Stage: ACTIVE ; Clock Speed: 75 MHz ; Supply Voltage: 2.38 to 2.62 volts ; I/O Ports: 36 ; Package Type: QFP, Other, 28 X 28 MM, 3.40 MM HEIGHT, PLASTIC, QFP-208 ; Operating Range: Commercial ; Pin Count: 208 ; Operating Temperature: 0 to 70 C (32 to 158

853S9252BKILFT : 853S SERIES, LOW SKEW CLOCK DRIVER, 2 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), QCC16 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, 3 X 3 MM, 0.925 MM HEIGHT, 0.50 MM PITCH, ROHS COMPLIANT, VFQFN-16 ; Supply Voltage: 2.38 to 3.63 volts ; Skew: 10 ps ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features / Standards: RoHS, Lead-Free

 
0-C     D-L     M-R     S-Z