Details, datasheet, quote on part number: IDT7008L-20
PartIDT7008L-20
CategoryMemory => SRAM => SRAM
TitleMulti-Ports
Description64K X 8 Dual-port RAM
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT7008L-20 datasheet
  

 

Features, Applications
Features

True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Military: 25/35/55ns (max.) Industrial: 55ns (max.) Commercial: 20/25/35/55ns (max.) Low-power operation IDT7008S Active: 750mW (typ.) Standby: 5mW (typ.) IDT7008L Active: 750mW (typ.) Standby: 1mW (typ.) Dual chip enables allow for depth expansion without external logic

IDT7008 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device M/S = VIH for BUSY output flag on Master, M/S = VIL for BUSY input on Slave Interrupt Flag On-chip port arbitration logic Full on-chip hardware support of semaphore signaling between ports Fully asynchronous operation from either port TTL-compatible, single 5V (10%) power supply Available in 84-pin PGA, 84-pin PLCC, and a 100-pin TQFP Industrial temperature range +85C) is available for selected speeds

NOTES: 1. BUSY is an input as a Slave (M/S = VIL) and an output when is a Master (M/S = VIH). 2. BUSY and INT are non-tri-state totem-pole outputs (push-pull).

Description

The is a high-speed x 8 Dual-Port Static RAM. The IDT7008 is designed to be used as a stand-alone 512K-bit Dual-Port RAM as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach 16-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down feature controlled by the chip enables (CE0 and CE1) permit the on-chip circuitry of each port to enter a very low standby power mode. Fabricated using IDT's CMOS high-performance technology, these devices typically operate on only 750mW of power. The IDT7008 is packaged a 84-pin Ceramic Pin Grid Array (PGA), a 84-pin Plastic Leadless Chip Carrier (PLCC) and a 100-pin Thin Quad Flatpack (TQFP).

NOTES: 1. This text does not indicate orientation of the actual part marking. 2. All Vcc pins must be connected to power supply. 3. Package body is approximately in x.17 in. 4. This package code is used to reference the package diagram. 5. All GND pins must be connected to ground supply.

NOTES: 1. This text does not indicate orientation of the actual part marking. 2. All Vcc pins must be connected to power supply. 3. Package body is approximately 1.4mm. 4. This package code is used to reference the package diagram. 5. All GND pins must be connected to ground supply.


 

Related products with the same datasheet
IDT7008
IDT7008L-25
IDT7008L-35
IDT7008L-35B
IDT7008L-55
IDT7008L-55B
IDT7008L20PF
IDT7008S-20
IDT7008S-25
IDT7008S-35
IDT7008S-35B
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT7008L-25 64K X 8 Dual-port RAM
IDT7009 128K X 8 Dual-port RAM
IDT7009L High-speed 128k X 8 Dual-port Static RAM
IDT7009L15PF 128K X 8 Dual-port RAM
IDT70121 Dual-port RAM Master: 2kx9
IDT70121L High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70121L-25 Dual-port RAM Master: 2kx9
IDT70121S High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70121S-25 Dual-port RAM Master: 2kx9
IDT70125L High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70125L-25 Dual-port RAM Master: 2kx9
IDT70125S High-speed 2k X 9 Dual-port Static RAM With Busy & Interrupt
IDT70125S-25 Dual-port RAM Master: 2kx9
IDT7014 4K X 9 Dual-port RAM
IDT7014S High-speed 4k X 9 Dual-port Static RAM
IDT7014S-12 4K X 9 Dual-port RAM
IDT7014S12J High-speed 4k X 9 Dual-port Static RAM
IDT7015 8K X 9 Dual-port RAM
IDT7015L High-speed 8k X 9 Dual-port Static RAM
IDT7015L-12 8K X 9 Dual-port RAM
IDT7015L12GB High-speed 8k X 9 Dual-port Static RAM

IDT54FCT166H244ETE : Fast CMOS 16-bit Buffer/line Driver

IDT74FCT162240ATPV : 16-BIT Inverting Buffer/line Driver

IDT79RC64T575-200DZ : Multi-issue 64-bit Microprocessor

ICS662M-03 : HDTV Audio/video Clock Source

IDT71V3577SA75BGGI : 128K X 36, 256K X 18 3.3V Synchronous Srams 3.3V I/O, Flow-through Outputs Burst Counter, Single Cycle Deselect

IDT70V5378S166BG : 3.3V 64/32k X 18 Synchronous Fourport Static RAM

IDT71V3556XSA133BGI : 256K X 18 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 256 k ; Bits per Word: 18 bits ; Package Type: BGA, 14 X 22 MM, PLASTIC, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7008S35GB : 64K X 8 DUAL-PORT SRAM, 35 ns, CPGA84 Specifications: Memory Category: SRAM Chip ; Density: 524 kbits ; Number of Words: 64 k ; Bits per Word: 8 bits ; Package Type: 1.120 X 1.120 INCH, 0.160 INCH HEIGHT, CERAMIC, PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 35 ns ; Operating Temperature: 0 to 70 C (32 to 1

71342LA20JG : 4K X 8 DUAL-PORT SRAM, 20 ns, PQCC52 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 4 k ; Bits per Word: 8 bits ; Package Type: 0.790 X 0.790 INCH, PLASTIC, LCC-52 ; Pins: 52 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

72T36115L6-7BB : 128K X 36 OTHER FIFO, 4.5 ns, PBGA240 Specifications: Memory Category: FIFO ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, 19 X 19 MM, 1 MM PITCH, GREEN, PLASTIC, BGA-240 ; Pins: 240 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Access Time: 4.5 ns ; Cycle Time: 10 ns ; Operating Temperature

 
0-C     D-L     M-R     S-Z