Details, datasheet, quote on part number: OM7636SM
PartOM7636SM
Category
DescriptionHi-rel Adjustable Voltage 3-Terminal Negative Regulator
CompanyInternational Rectifier Corp.
DatasheetDownload OM7636SM datasheet
Quote
Find where to buy
 
  

 

Features, Applications

SURFACE MOUNT NEGATIVE ADJUSTABLE 1.0 AMP VOLTAGE REGULATOR
Isolated Hermetic Surface Mount Package 1.0 Amp, Negative Adjustable Voltage Regulator
FEATURES

Isolated Hermetic Surface Mount Package Adjustable Output Voltage Eliminates Stocking Fixed Voltages Built-In Thermal Overload Protection Short Circuit Current Limiting Product Is Available Hi-Rel Screened Electrically Similar To Industry Standard Type LM137

DESCRIPTION

This three terminal negative regulator is supplied in a hermetically sealed metal surface mount package. All protective features are designed into the circuit, including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 1.0 amp of output current. This unit features output voltages that can be trimmed using external resistors, from -1.2 volts to -37 volts.

Input to Output Voltage Differential. 40V Operating Junction Temperature Range. + 150C Storage Temperature Range. + 150C Typical Power/Thermal Characteristics: Rated Power @ 25C TC. 17.5W TA. 3W Thermal Resistance: JC. 3.5C/W JA. 42C/W Lead Temperature at Case (5 sec). 225C

Test Conditions VDIFF = 25C VDIFF = 3.0V VDIFF = 25C VDIFF = 40V
Line Regulation (Note 1) Load Regulation (Note 1)
3.0 V VDIFF 3.0 V VDIFF 40V VDIFF IL 1.5A VDIFF = 25C VDIFF = 25C VDIFF IL 100mA

= 120 Hz, Vout = Vref CAdj 10 F VDIFF = 3.0V VDIFF 40V 3.0V VDIFF 40V VDIFF IL 1.5A VDIFF = 3.0V, Vout = -1.4V (forced) VDIFF = 10V, Vout = -1.4V (forced) VDIFF = 40V, Vout = -1.4V (forced) VDIFF 5V VDIFF = 25C

Adjustment Pin Current Change Miminum Load Current

Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The denotes the specifications which apply over the full operating temperature range.


 

Some Part number from the same manufacture International Rectifier Corp.
OM7637SM 3.0A Positive Adjustable Voltage Regulator
OM7637SM Hi-rel Adjustable Voltage 3-Terminal Positive Regulator
OM7638SM 3.0A Negative Adjustable Voltage Regulator
OM7638SM Hi-rel Adjustable Voltage 3-Terminal Negative Regulator
OM7639SM 1.5A Positive Voltage Regulator
OM7639SM Hi-rel Fixed Voltage 3-Terminal Positive Regulator
OM7640SM 1.5A Positive Voltage Regulator
OM7640SM Hi-rel Fixed Voltage 3-Terminal Positive Regulator
OM7641SM 1.5A Positive Voltage Regulator
OM7641SM Hi-rel Fixed Voltage 3-Terminal Positive Regulator
OM7642SM 1.5A Negative Voltage Regulator
OM7642SM Hi-rel Fixed Voltage 3-Terminal Negative Regulator
OM7643SM 1.5A Negative Voltage Regulator
OM7643SM Hi-rel Fixed Voltage 3-Terminal Negative Regulator
OM7644SM 1.5A Negative Voltage Regulator
OM7644SM Hi-rel Fixed Voltage 3-Terminal Negative Regulator
OM7646SM 1.5A High Voltage, Positive Adjustable Voltage Regulator
OM7646SM Hi-rel Adjustable Voltage 3-Terminal Positive Regulator
OM7647SM 1.0A High Voltage, Negative Adjustable Voltage Regulator
OM7647SM Hi-rel Adjustable Voltage 3-Terminal Negative Regulator
OM7648SM 1.0A Three Terminal, Fixed Voltage, Low Dropout Voltage Regulator
Same catergory

2SC4580 : . Storage Temperature Junction Temperature Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current DC Collector Current Peak Base Current DC Base Current Peak Total Transistor Dissipation Dielectric Strength Mounting Torque Symbol Tstg Tj VCBO VCEO VCEX VEBO BP PT Vdis TOR Electrical Characteristics (Tc=25) Item.

2SK1739 : VDSS (V) = 80 ;; Pc(tc = 25 C) (W) = 250 ;; Id (A) = 11 ;; Pout (W) .min = 90 ;; VDD (V) = 40 ;; .f (MHz) = 770 ;; Pin (W) = 10 ;; Applications = Tvuhf.

AK93C45A : . This document is not intended for viewing onscreen. It is best viewed when printed and read from paper. Depending on your printer, you may need to select "Shrink to Fit" in the print dialog to ensure that the document prints correctly. 1 ADVANCED CMOS 1%PROM TECHNOLOGY READ/WRITE NON-VOLATILE MEMORY WIDE VCC OPERATION VCC 5.5V 1024 bits, X 16 organization.

ST1-L2-DC12V : IC Drivable PC Board Relay FOR Field LOAD Switching. IC DRIVABLE PC BOARD RELAY FOR FIELD LOAD SWITCHING Sealed to meet the combination process of automatic wave soldering and cleaning needs Latching types available High switching capacity and high sensitivity in subminiature size 150 mW pick-up, 8 A inrush capacity: 51 A for 35 A for 2a High shock and vibration resistance Shock: 20 G, Vibration: Hz at double.

407T15SM : Surface Mount Quartz Crystal. Standard 7.0x5.0mm Surface Mount Footprint Stable Frequency Over Temperature and Drive Level Frequency Range 100 MHz Frequency Tolerance, 30 ppm Standard (10 ppm and 20 ppm available) Frequency Stability, 50 ppm Standard (10,20,30 and 40 ppm available) Operating Temperature to +85C Tape & Reel Packaging, EIA-481-2 Compliant RoHS/Green Compliant.

PM5HD : Surface Mount Crystals 5.0 x 7.0 x 1.3 mm. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. .

5205718-4 : D-sub, D-shaped - Backshells, Hood Connectors, Interconnect Hinged Backshell; CONN BACKSHELL DB25 PLASTIC. s: Material: Thermoplastic ; Number of Positions: 25 ; Shielding: Unshielded ; Hardware: Assembly Hardware, Cable Clamp ; Cable Exit: 45, 180 ; : - ; Accessory Type: Hinged Backshell ; Color: Black ; Cable Type: Round ; Plating: - ; Lead Free.

GCM15DSUH : Gold Through Hole Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 30POS DIP .156 SLD. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole ; : - ; Number of Positions: 30 ; Number of Rows: 2 ; Pitch: 0.156" (3.96mm) ; Packaging:.

LHL06NB1R0M : Fixed Inductors, Coils, Choke 1H 750mA Radial -; INDUCTOR 1UH 750MA RADIAL. s: Inductance: 1H ; Tolerance: 20% ; Package / Case: Radial ; Packaging: Bulk ; Type: - ; Current: 750mA ; Mounting Type: Through Hole ; Q @ Freq: 50 @ 7.96MHz ; Frequency - Self Resonant: 87MHz ; DC Resistance (DCR): 150 mOhm Max ; Shielding: Unshielded ; Applications: General.

SI7457DP-T1-E3 : Fet - Single Discrete Semiconductor Product 28A 100V 83W Surface Mount; MOSFET P-CH D-S 100V PPAK 8SOIC. s: Mounting Type: Surface Mount ; FET Type: MOSFET P-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 100V ; Current - Continuous Drain (Id) @ 25 C: 28A ; Rds On (Max) @ Id, Vgs: 42 mOhm @ 7.9A, 10V ; Input Capacitance (Ciss) @ Vds: 5230pF.

J216-410-D : Terminal - Wire Splice Connectors, Interconnect Butt Splice, Closed End, Single Opening; WIRE JOINT NON-INS 16-10AWG. s: Color: - ; : - ; Insulation: Non-Insulated ; Number of Wire Entries: 1 ; Packaging: Bulk ; Terminal Type: Butt Splice, Closed End, Single Opening ; Termination: Crimp ; Wire Gauge: 10-16 AWG.

BX6561 : RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER. s: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Package Type: H1.

E5888-010021 : 8 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK. s: Applications: Telecom / Data / Network Connectors ; Gender: Female ; Termination Types: SOLDER ; Number of Contacts: 8.

ISO5852SDWR : Gate Drivers Reinforced Isolated IGBT Gate Driver with High CMTI, Split Outputs & Safety 16-SOIC -40 to 125. Texas Instruments ISO5852S IGBT MOSFET Gate Drivers are a 5.7kVRMS, reinforced isolated gate driver for IGBTs and MOSFETs with split outputs providing 2.5A source and 5A sink current. The input side operates from a single 2.25V to 5.5V supply.

 
0-C     D-L     M-R     S-Z