|Category||Multimedia => Video => TV Applications => NTSC|
|Description||Ntsc/pal Video Decoder|
|Datasheet||Download HMP8112 datasheet
Supports ITU-R BT.601 (CCIR601) and Square Pixel 3 Composite Analog Inputs with Sync Tip AGC, Black Clamping and White Peak Control Patented Decoding Scheme with Improved 2-Line Comb Filter, Y/C Separation NTSC M, N, and PAL (B, M, N, CN) Operation Composite or S-Video Input User-Selectable Color Trap and Low Pass Video Filters User Selectable Hue, Saturation, Contrast, Sharpness, and Brightness Controls User Selectable Data Transfer Output Modes 16-Bit 4:2:2 YCbCr 8-Bit 4:2:2 YCbCr User Selectable Clock Range from 30MHz I2C Interface VMI Compatible Video Data BusDescription
The is a high quality, digital video, color decoder with internal A/D converters. The A/D function includes a 3:1 analog input mux, Sync Tip AGC, Black clamping and two 8-bit A/D Converters. The high quality A/D converters minimize pixel jitter and crosstalk. The decoder function is compatible with NTSC M, PAL M, N and special combination PAL N video standards. Both composite (CVBS) and S-Video (Y/C) input formats are supported. A 2 line comb filter plus a user selectable Chrominance trap filter provide high quality Y/C separation. Various adjustments are available to optimize the image such as Brightness, Contrast, Saturation, Hue and Sharpness controls. Video synchronization is achieved with a 4xfSC chroma burst lock PLL for color demodulation and line lock PLL for correct pixel alignment. A chrominance subsampling 4:2:2 scheme is provided to reduce chrominance bandwidth. The HMP8112 is ideally suited as the analog video interface to VCR's and camera's in any multimedia or video system. The high quality Y/C separation, user flexibility and integrated phase locked loops are ideal for use with today's powerful compression processors. The HMP8112 operates from a single 5V supply and is TTL/CMOS compatible.Applications
Multimedia PCs Video Conferencing Video Editing Video Security Systems Settop Boxes (Cable, Satellite, and Telco) Digital VCRs Related Products - NTSC/PAL Encoders: HMP8173 - NTSC/PAL Decoders: HMP8115PART NUMBER HMP8112EVAL2 HMP8156EVAL2 TEMP. RANGE (oC) to 70 PACKAGE 80 Ld PQFP PKG.NO. Q80.14x20
PCI Reference Design (Includes Part) Frame Grabber Evaluation Board (Includes Part)
Functional Block Diagrams. 2 Functional Operation Introduction. 6 Internal Register Description Tables. 14 Pinout. 21 Pin Descriptions. 22 AC and DC Electrical Specifications. 24 Typical Performance Curves. 27 Applications Information. 39 Package Dimensions. 40
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. CopyrightDIGITAL COMPARATORS Y/C SEPARATION COLOR TRAP WHITE PEAK LEVEL BLACK LEVEL SYNC LEVEL
ACTIVE DVLD OUTPUT SAMPLE RATE CONVERTER Y[7:0]
AGC AND CLAMP LOGIC COLOR DEMODULATION INPUT SAMPLE RATE CONVERTER
DIGITAL COMPARATOR CLAMP CHROMA PLL VSYNC DETECT + 8-BIT ADC STD_ERR
EXTERNAL ANTIALIASING FILTER CIN3 + EXTERNAL ANTIALIASING FILTER 8-BIT ADC C CR[7:0]
DIGITAL COMPARATORS LCLAMP_CAP SYNC LEVEL AGC AND CLAMP LOGIC BLACK LEVEL WHITE PEAK LEVEL
|Some Part number from the same manufacture Intersil Corporation|
|HMP8112A Ntsc/pal Video Decoder|
|HMP8154 Ntsc/pal Encoders|
|HMP8156 Ntsc/pal Encoder|
|HMP8170 Ntsc/pal Video Encoder|
FRL9230H : 3a, -200v, 1.30 Ohm, Rad Hard, P-channel Power MOSFETs
ICL7660SCPA : Super Voltage Converter
ISL9011IRBJZ : Dual LDO with Low Noise, Low IQ, and High PSRR ISL9011 is a high performance dual LDO capable of sourcing 150mA current from channel 1 and 300mA from channel 2. The device has a low standby current and high- PSRR and is stable with output capacitance of 1µF to 10µF with ESR of up to 200mÙ. A ref
X40430_06 : Triple Voltage Monitor with Integrated CPU Supervisor
ISL83085EIUZ-T : +-15kv ESD Protected, 5V, Full Fail-safe, Fractional (1/8) Unit Load, Rs-485/rs-422 Transceivers
ICL7611BCJE : 1.4mhz, Low Power CMOS Operational Amplifiers
EL7457CU-T7 : 40mhz Non-inverting Quad CMOS Driver
ISL6559CBZ-T : Multi-phase PWM Controller
ICL7621BMSE : Dual, Low Power CMOS Operational Amplifiers
ISL29027IROZ-T7 : Proximity Sensor With Intelligent Interrupt And Sleep Modes The ISL29027 is an integrated infrared light-to-digital converter with a built-in IR LED driver and I2C Interface (SMBus Compatible). The flexible interrupt scheme is designed for minimal microcontroller utilization. For proximity senso
ISL31495EIBZ : LINE TRANSCEIVER, PDIP8 Specifications: Device Type: Transceiver ; Package Type: DIP, ROHS COMPLIANT, PLASTIC, MS-001BA, DIP-8 ; Pins: 8
AD9845A : Graphics. Complete 12-Bit 30 MSPS CCD Signal Processor. 30 MSPS Correlated Double Sampler (CDS) dB 6-Bit Pixel Gain Amplifier ( PxGA®) dB 10-Bit Variable Gain Amplifier (VGA) Low Noise Clamp Circuits Analog Preblanking Function 12-Bit 30 MSPS A/D Converter Auxiliary Inputs with VGA and Input Clamp 3-Wire Serial Digital Interface 3 V Single Supply Operation Low Power: 3 V Supply 48-Lead LQFP Package APPLICATIONS.
CS5471 : Dual-channel Analog-to-digital Converter.
CXA2119M : TV Sound Processor. Y Color Difference I/f. The is a video switch IC developed for Y color difference I/F used in televisions. Two YCbCr input systems, one RGB input system, one YCbCr output system Three inputs, one output for composite video signal On-chip matrix circuit for RGB signal YCbCr signal On-chip 6dB amplifier Has YM function relative to YCbCr input Absolute Maximum Ratings (Ta = 25°C,.
HFA1103 : Sync/Deflection. 200MHz, Video op Amp With High Speed SYNC Stripper. 200MHz, Video Op Amp with High Speed Sync Stripper The is a high-speed, wideband, fast settling current feedback op amp with a sync stripping function. The is a basic op amp with a modified output stage that enables it to strip the sync from a component video signal. The output stage has an open emitter NPN transistor that prevents the output from going.
HI1866JCQ : 6-bit, 140 Msps, Flash A/D Converter. a 6-bit, high-speed, flash A/D converter capable of digitizing analog signals at the maximum rate of 140 MSPS. The digital input level is compatible with the ECL 100K/10KH/10K. Ultra-High Speed Operation with Maximum Conversion Rate. 140 MSPS [ /Title (HI1866) Low Input Capacitance. 7pF /Subject (6-Bit, 140 MSPS, Flash A/D Converter) Wide Analog Input.
ISD1400Series : Management/Control. Single-chip Voice Record/playback Devices 16- And 20-second Durations.
ISD2532/40/48/64PRODUCTSsec1 : Management/Control. Single-chip Voice Record/playback Devices 32-, 40-, 48-, And 64-second Durations.
M52761FP : Pll-split Vif/sIF IC. The is IF signal-processing IC for VCRs and TVs. It enable the PLL detection system despite size as small as that of conventional quasi-synchronous VIF/SIF detector, IF/RF AGC, SIF limiter, FM detector, QIF AGC and EQ AMP. Video detection output 2VP-P. It has built-in EQ AMP. The video detector uses PLL for full synchronous detection circuit. It produces.
NJM2538 : Video Amplifier With 75 Ohms Driver.
TDA8440 : Tape Player/VCR. TDA8440; Switch For CTV Receivers. Product File under Integrated Circuits, IC02 November 1985 GENERAL The is a versatile video/audio switch, intended to be used in CTV receivers equipped with an AUXILIARY VIDEO/AUDIO plug. It provides two 3-state switches for audio channels and one 3-state switch for the video channel and a video amplifier with selectable gain (times 1 or times 2). The integrated.
TVP3026 : Display Controllers. Video InterfacE PALette. IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor.
MAX9741 : 12W+12W, Low EMI, Spread-Spectrum, Stereo, Class D Amplifier The MAX9741 stereo Class D audio power amplifier provides Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a Class D architecture, the MAX9741 delivers 12W continuous output power into 8 loads. Proprietary and patent-protected.
LM4985 : The LM4985 is a stereo audio power amplifier with internal digitally controlled volume control. This amplifier is capable of delivering 68mWRMS per channel into a 16 load or 38mWRMS per channel into a 32 load at 1% THD when powered by a 3.6V power supply and operating in the OCL mode. Boomer audio power amplifiers were designed specifically to provide.
TS4601B : Audio Power Amplifiers Datasheet High performance stereo headphone amplifier with capacitorless outputs and I??C bus interface.
LM48100Q : Mono, 1.3W Audio Power Amplifier With Output Fault Detection And Volume Control From The PowerWise® Family The LM48100Q is a single supply, mono, bridge-tied load amplifier with I 2C volume control, ideal for automotive applications. A comprehensive output fault detection system senses the load conditions, protecting the device during short circuit.