|Category||Multimedia => Video => TV Applications => NTSC|
|Datasheet||Download HMP8156A datasheet
The HMP8156 NTSC and PAL encoder is designed for use in systems requiring the generation of high-quality NTSC and PAL video from digital image data. YCbCr or RGB digital video data drive the P0-P23 inputs. Overlay inputs are processed and the data is 2x upsampled. The Y data is optionally lowpass filtered to 5MHz and drives the Y analog output. Cb and Cr are each lowpass filtered to 1.3MHz, quadrature modulated, and summed. The result drives the C analog output. The digital Y and C data are also added together and drive the two composite analog outputs. The YCbCr data may also be converted to RGB data to drive the DACs, allowing support for the European SCART connector. The DACs can drive doubly-terminated (37.5) lines, and run a 2x oversampling rate to simplify the analog output filter requirements.Features
(M) NTSC and (B, M, N, CN) PAL Operation ITU-R BT.601 and Square Pixel Operation Digital Input Formats - 4:2:2 YCbCr - 4:4:4 RGB or 24-Bit Linear or Gamma-Corrected - 8-Bit Parallel ITU-R BT.656 - Seven Overlay Colors Analog Output Formats - Y/C + Two Composite - RGB + Composite (SCART) Flexible Video Timing Control - Timing Master or Slave - Selectable Polarity on Each Control Signal - Programmable Blank Output Timing - Field Output Closed Caption Encoding for NTSC and PAL 2x Upscaling of SIF Video Four 2x Oversampling, 10-Bit DACs I2C Interface Verilog Models Available.
Functional Block Diagram. 2 Functional Operation. 3 Pixel Data Input Formats. 3 Input Processing. 4 Pixel Input and Control Signal Timing. 5 Video Timing Control. 10 Video Processing. 12 Analog Outputs. 14 Host Interfaces. 15 Pinout. 22 Pin Descriptions. 22 Applications Information. 30 Evaluation Kits. 32Applications
Multimedia PCs Video Conferencing Video Editing Related Products - NTSC/PAL Encoders: HMP8154 - NTSC/PAL Decoders: HMP8112A, HMP8115PART NUMBER HMP8156EVAL1 HMP8156EVAL2 TEMP. RANGE ( oC) to 70 PACKAGE 64 PQFP PKG. NO. Q64.14x14
Daughter Card Evaluation Platform (Note) Frame Grabber Evaluation Platform (Note)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2002. All Rights Reserved 1OPTIONAL 2X UPSCALING (SIF MODE) CLOSED CAPTIONING PROCESSING
2X UPSAMPLE 8:8:8 LP FILTER Cb/Cr CHROMA MODULATION FIELD
The is a fully integrated digital encoder. It accepts digital video input data and generates four analog video output signals. The input data format is selectable and includes YCbCr, RGB, and overlay data. The outputs are configurable to be either two composite video signals and Y/C (SVideo) or one composite and component RGB video. The HMP8156 accepts pixel data in one of several formats and transforms it into 4:4:4 sampled luminance and chrominance (YCbCr) data. If enabled, the encoder also mixes overlay data with the input data. The encoder then interpolates the YCbCr data to twice the pixel rate and low pass filters it to match the bandwidth of the video output format. If enabled, the encoder also adds Closed Captioning information to the Y data. At the same time, the encoder modulates the chrominance data with a digitally synthesized subcarrier. Finally, the encoder outputs the luminance, chrominance, and their sum as analog signals using 10-bit D/A converters. The HMP8156 provides operating modes to support all versions of the NTSC and PAL standards and accepts full and SIF size input data with rectangular (ITU-R BT.601) and square pixel ratios. It operates from a single clock at twice the pixel clock rate determined by the operating mode. The HMP8156's video timing control is flexible. It may operate as the master generating the system's video timing control signals or it may accept external timing controls. The polarity of the timing controls and the number of active pixels and lines are programmable.
The HMP8156 accepts pixel data via the P0-P23 input pins. The definition of each pixel input pin is determined by the input format selected in the input format register. The definition for each mode is shown in Table 1. YCbCr Pixel Data The HMP8156 accepts 4:2:2 sampled YCbCr input data. The luminance and color difference signals are each 8 bits, scaled to 255. Values outside their nominal ranges (16235 for Y and 16-240 for Cb and Cr) are processed normally. The color difference signals are time multiplexed into one 8bit bus beginning with a Cb sample. The Y and CbCr busses may be input in parallel (16-bit mode) or may be time multiplexed and input as a single bus (8-bit mode). The single bus may also contain SAV and EAV video timing reference codes (ITU-R BT.656 mode). RGB Data The HMP8156 accepts 4:4:4 sampled RGB component video input data. The color signals may be (8,8,8) for 24-bit mode or (5,6,5) for 16-bit mode. In 24-bit mode, they are scaled to 255, black to white. In 16-bit mode, the encoder left shifts the input so that it has the same scale as 24-bit input. The RGB data may be linear or gamma corrected; if enabled, the encoder will gamma correct the input data. Overlay Data The HMP8156 accepts 5 bits of pixel overlay input data and combines it with the input pixel data. The data specifies an overlay color and the fractions of the new and original colors to be summed. Blue Screen Generation In blue screen mode, the HMP8156 ignores the pixel input data and generates a solid, blue screen. The overlay inputs may be used to place information over the blue screen.
|Related products with the same datasheet|
|Some Part number from the same manufacture Intersil Corporation|
|HMP8156ACN Ntsc/pal Encoder|
|HMP8170 Ntsc/pal Video Encoder|
|HMP9701 AC97 Audio Codec|
|HMP9701ACN Ac97 Audio Codec|
|HMPVIDEVALISA Ntsc/pal Video Decoder|
CD4049UBDMSR : Space Applications Radiation Hardened CMOS Hex Buffer/converter
HIP6311ACB-T : Desktop Microprocessor Core Voltage Regulator Multi-phase Buck PWM Controller
ISL22444UFR20Z-TK : Quad Digitally Controlled Potentiometer (XDCP™), Low Noise, Low Power, SPI® Bus, 256 Taps The ISL22444 integrates four digitally controlled potentiometers (DCP), control logic and non-volatile memory on a monolithic CMOS integrated circuit.
ISL6251_06 : Low Cost Multi-chemistry Battery Charger Controller
ISL98001CQZ-210 : 8-bit Video Analog Front End (afe) with Measurement and Auto-adjust Features
X9408WV24IZ-2.7T1 : Low Noise/low Power/2-wire Bus
ISL1801 : SPMIC For Micro-Converter Bias And Drivers The ISL1801 is a power management IC (PMIC) optimized for solar array micro-converters and other systems operating from a high voltage DC supply. The ISL1801 can be used in buck, boost or buck-boost micro-converter topologies in order to maximize the energ
EL5171ISZ-T7 : LINE DRIVER Specifications: Device Type: Line / Bus Driver
ISL9000IRMNZ-T : DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO10 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, 3 X 3 MM, PLASTIC, MO-229WEED-3, DFN-10 ; Life Cycle Stage: ACTIVE ; Output Voltage: 3.3 volts ; IOUT: 0.1000 amps ; VIN: 2.3 to 5.5 volts
2SK363 : N-channel Junction Type ( For Audio Amplifier, Analog Switch, Constant Current And Impedance Converter Applications ).
AIC111RHB : Voice-Band Codecs. ti AIC111, 1.3-V Micro Power Single Channel Codec. IC DESIGN 1.3-V microPower DSP/µC VOICE BAND AUDIO CODEC D Single Channel Codec D Noise Shaped Delta Sigma ADC and DAC 32-Pin QFN 5×5-mm Plastic Package 32-Pad Bumped Die in Waffle Pack (wafer scale packaging), or Tape and Reel, (Preview, Available 3rd Quarter 2003) 1.3-V Typical Power Supply 350-µA Typical Supply Current Drain Monitor That.
AN5095K : Function Block. Single Chip ic With I2c Bus Interface For Pal/ntsc Color TV System.
CS44800 : 6- And 8-Channel Digital Amplifier Controllersthe CS44600 And CS44800 Pin-compatible Class-d Digital Amplifier Controllers Provide a Simple, Small, And Cost-effective Solution For DVD Receivers, Home Theater Recorders, And Entry-level Audio/video Recorders And Home-theater-in-a-box Systems.these Multi-channel Digital-to-pwm (pulse Width Modulation).
CS6710 : MPEG-4 Video Encode. Motion Estimation Controller. The CS6710 is the key motion estimation and motion compensation block of both the MPEG-4 encoder and codec functions. The motion compensation functionality is incorporated to complete the encoder's reconstruction path. Further to reconstruction of pixels to the reference frame store, the motion compensation unit can be enhanced to provide full motion.
CXA2560Q : Signal Processor. Dolby*b Type Noise Reduction System With Playback Equalizer Amplifier.
GS9029 : Drivers. Genlinx(tm)ii Quad Output Serial Digital Video Cable Driver. DATA SHEET SMPTE 259M compliant four isolated outputs (two complimentary pairs), adjustable from 50mV-1000mV into 75 loads operational from to 540Mb/s and beyond nominal 500ps rise/fall times precise ±7.5% output amplitudes 40% system power reduction over GS9007 75 on-chip input termination resistors input hysteresis operational down to 80mV input amplitude.
ICL7104-14CPL : 14-bit/16-bit, Microprocessor- Compatible, 2-chip, A/D Converter. The ICL7104, combined with the or ICL8068, forms a member of Intersil' high performance A/D converter family. The ICL7104-16, performs the analog switching and digital function for a 16-bit binary A/D converter, with full three-state output, UART handshake capability, and other outputs for easy interfacing. The a 14-bit version. The analog section,.
MAX4356 : 16 X 16 Nonblocking Video Crosspoint Switch With On-screen Display Insertion And I/o Buffers.
MAX9703 : 15W, Filterless, Spread-spectrum Mono/stereo Class D Amplifiers KEY Applications Filterless Class D Amplifier Unique Spread-spectrum Mode Offers 5dB Emissions Improvement Over Conventional Methods Up to 78% Efficient 15W Output Power Into 8 Up to 20W Peak Power Low 0.07% Thd+n High PSRR (80dB at 1kHz) 10V to 25V Single-supply Operation Differential.
MT9162AE : Programmable Law. = 5V Single Rail Multi-featured Phone Codec With Programmable U/a Law Companding And Reference Voltage And Bias Source ;; Package Type = Pdip ;; No. Of Pins = 20.
NJM2238 : Video Sub-carrier Signal Tripler.
NJM2523 : 3-Input/2-Input Video Switch.
TC9154AP : Electronic Volume.
SSM2311 : Filterless High Efficiency Mono 3 W Class-D Audio Amplifier The SSM2311 a high efficiency, low noise modulation scheme that does not require any external LC output filters. The modulation continues to provide high efficiency even at low output power. It operates with 90% efficiency at 1.4 W into 8 or 85% efficiency at 3 W into 3 from a 5.0 V supply.