Details, datasheet, quote on part number: HMP8156ACN
CategoryCommunication => Wireless
DescriptionNtsc/pal Encoder
CompanyIntersil Corporation
DatasheetDownload HMP8156ACN datasheet
Find where to buy


Features, Applications


The HMP8156 NTSC and PAL encoder is designed for use in systems requiring the generation of high-quality NTSC and PAL video from digital image data. YCbCr or RGB digital video data drive the P0-P23 inputs. Overlay inputs are processed and the data is 2x upsampled. The Y data is optionally lowpass filtered to 5MHz and drives the Y analog output. Cb and Cr are each lowpass filtered to 1.3MHz, quadrature modulated, and summed. The result drives the C analog output. The digital Y and C data are also added together and drive the two composite analog outputs. The YCbCr data may also be converted to RGB data to drive the DACs, allowing support for the European SCART connector. The DACs can drive doubly-terminated (37.5) lines, and run a 2x oversampling rate to simplify the analog output filter requirements.


(M) NTSC and (B, M, N, CN) PAL Operation ITU-R BT.601 and Square Pixel Operation Digital Input Formats - 4:2:2 YCbCr - 4:4:4 RGB or 24-Bit Linear or Gamma-Corrected - 8-Bit Parallel ITU-R BT.656 - Seven Overlay Colors Analog Output Formats - Y/C + Two Composite - RGB + Composite (SCART) Flexible Video Timing Control - Timing Master or Slave - Selectable Polarity on Each Control Signal - Programmable Blank Output Timing - Field Output Closed Caption Encoding for NTSC and PAL 2x Upscaling of SIF Video Four 2x Oversampling, 10-Bit DACs I2C Interface Verilog Models Available.

Functional Block Diagram. 2 Functional Operation. 3 Pixel Data Input Formats. 3 Input Processing. 4 Pixel Input and Control Signal Timing. 5 Video Timing Control. 10 Video Processing. 12 Analog Outputs. 14 Host Interfaces. 15 Pinout. 22 Pin Descriptions. 22 Applications Information. 30 Evaluation Kits. 32


Multimedia PCs Video Conferencing Video Editing Related Products - NTSC/PAL Encoders: HMP8154 - NTSC/PAL Decoders: HMP8112A, HMP8115

Daughter Card Evaluation Platform (Note) Frame Grabber Evaluation Platform (Note)

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2002. All Rights Reserved 1


The is a fully integrated digital encoder. It accepts digital video input data and generates four analog video output signals. The input data format is selectable and includes YCbCr, RGB, and overlay data. The outputs are configurable to be either two composite video signals and Y/C (SVideo) or one composite and component RGB video. The HMP8156 accepts pixel data in one of several formats and transforms it into 4:4:4 sampled luminance and chrominance (YCbCr) data. If enabled, the encoder also mixes overlay data with the input data. The encoder then interpolates the YCbCr data to twice the pixel rate and low pass filters it to match the bandwidth of the video output format. If enabled, the encoder also adds Closed Captioning information to the Y data. At the same time, the encoder modulates the chrominance data with a digitally synthesized subcarrier. Finally, the encoder outputs the luminance, chrominance, and their sum as analog signals using 10-bit D/A converters. The HMP8156 provides operating modes to support all versions of the NTSC and PAL standards and accepts full and SIF size input data with rectangular (ITU-R BT.601) and square pixel ratios. It operates from a single clock at twice the pixel clock rate determined by the operating mode. The HMP8156's video timing control is flexible. It may operate as the master generating the system's video timing control signals or it may accept external timing controls. The polarity of the timing controls and the number of active pixels and lines are programmable.

The HMP8156 accepts pixel data via the P0-P23 input pins. The definition of each pixel input pin is determined by the input format selected in the input format register. The definition for each mode is shown in Table 1. YCbCr Pixel Data The HMP8156 accepts 4:2:2 sampled YCbCr input data. The luminance and color difference signals are each 8 bits, scaled to 255. Values outside their nominal ranges (16235 for Y and 16-240 for Cb and Cr) are processed normally. The color difference signals are time multiplexed into one 8bit bus beginning with a Cb sample. The Y and CbCr busses may be input in parallel (16-bit mode) or may be time multiplexed and input as a single bus (8-bit mode). The single bus may also contain SAV and EAV video timing reference codes (ITU-R BT.656 mode). RGB Data The HMP8156 accepts 4:4:4 sampled RGB component video input data. The color signals may be (8,8,8) for 24-bit mode or (5,6,5) for 16-bit mode. In 24-bit mode, they are scaled to 255, black to white. In 16-bit mode, the encoder left shifts the input so that it has the same scale as 24-bit input. The RGB data may be linear or gamma corrected; if enabled, the encoder will gamma correct the input data. Overlay Data The HMP8156 accepts 5 bits of pixel overlay input data and combines it with the input pixel data. The data specifies an overlay color and the fractions of the new and original colors to be summed. Blue Screen Generation In blue screen mode, the HMP8156 ignores the pixel input data and generates a solid, blue screen. The overlay inputs may be used to place information over the blue screen.


Related products with the same datasheet
Some Part number from the same manufacture Intersil Corporation
HMP8156CN Ntsc/pal Encoder
HMP8170 Ntsc/pal Video Encoder
HMP9701 AC97 Audio Codec
HMP9701ACN Ac97 Audio Codec
HMPVIDEVALISA Ntsc/pal Video Decoder

CA139A : Quad Voltage Comparators For Industrial, Commercial And Military Applications

ISL6142CB-T : Negative Voltage Hot Plug Controller

ISL6410AIUZ-TK : Synchronous Buck Regulator (VIN = 3.3V 10%)The ISL6410, ISL6410A Are Synchronous Current-mode PWM Regulators Designed to Provide a Total DC-DC Solution For Microcontrollers, Microprocessors, CPLDs, Fpgas, Core Processors/BBP/MAC, And Asics. The ISL6410 Should be Selected For Applications Using

ISL6548A : ACPI Regulator/controller for Dual Channel DDR Memory Systems

X9315TSI : Low Noise, Low Power, 32 Taps

EL4543IU : Triple Differential Twisted-pair Driver with Common-mode Sync Encoding

X28C512PI : 5V, Byte Alterable Eeprom

ISL9305IRTHWCLBZ-T : 3MHz Dual 1.5A Step-Down Converters And Dual Low-Input LDOs With I2C Compatible Interface ISL9305H is an integrated mini Power Management IC (mini- PMIC) for powering low-voltage microprocessor, or applications using a single Li-Ion or Li-Polymer cell battery to power multiple voltage rails. ISL930

ISL60002CIH325Z-T7A : Precision 3.300V Low Power FGA Reference The ISL60002 FGA voltage references are very high precision analog voltage references fabricated in Intersil's proprietary Floating Gate Analog technology and feature low supply voltage operation at ultra-low 400nA operating current. Additional features

ISL28208FBZ-T1 : DUAL OP-AMP, 140 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDSO8 Specifications: Supply Voltage (VS): 5 volts ; IBIAS: 6.00E-4 µA ; CMRR: 145 dB ; Slew Rate: 0.3200 V/µs ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Package Type: SOIC, ROHS COMPLIANT, PLASTIC, MS-012, SOIC-8 ; Number of Pins: 8 ; Number of Devices: 2 ; Standards: RoHS

0-C     D-L     M-R     S-Z