|Category||Multimedia => Audio => D/A Converters|
|Description||14-bit, +3.3v, 130/210msps, Commlinktm High Speed D/A Converter|
|Datasheet||Download ISL59612IA datasheet
The 14-bit, 130/210+MSPS (Mega Samples Per Second), CMOS, high speed, low power, D/A (digital to analog) converter, designed specifically for use in high performance communication systems such as base transceiver stations utilizing or 3G cellular protocols. This device complements the CommLink ISL5x61 family of high speed converters, which include 10, 12, and 14-bit devices.Features
Speed Grades. 130M and 210+MSPS Low Power. 103mW with 20mA Output at 130MSPS Adjustable Full Scale Output Current. 20mA +3.3V Power Supply 3V LVCMOS Compatible Inputs Excellent Spurious Free Dynamic Range (75dBc to Nyquist, = 130MSPS, fOUT = 10MHz) UMTS Adjacent Channel Power at 19.2MHz EDGE/GSM SFDR in 20MHz Window Pin compatible, 3.3V, Lower Power Replacement For The AD9754 and HI5960
PART NUMBER ISL5961/2IA ISL5961EVAL1 TEMP. RANGE (oC) 85 25 PACKAGE 28 Ld SOIC PKG. NO. M28.3 CLOCK SPEED 130MHz 210MHzApplications
Cellular Infrastructure - Single or Multi-Carrier: IS-136, IS95, GSM, EDGE, CDMA2000, WCDMA, TDS-CDMA BWA Infrastructure Medical/Test Instrumentation Wireless Communication Systems High Resolution Imaging Systems Arbitrary Waveform Generators
D13 (MSB) 1 28 CLK 27 DVDD 26 DCOM NC 24 AVDD 23 COMP 22 IOUTA 21 IOUTB 20 ACOM NC 18 FSADJ 17 REFIO 16 REFLO 15 SLEEP
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2001, All Rights Reserved CommLinkTM is a trademark of Intersil Americas Inc.
(13) D0 (LSB) (14) CLK (28) 50 BEAD 10µH 0.1µF DCOM (26) DVDD (27) (20) ACOM (24) AVDD (23) COMP 0.1 µF FERRITE BEAD + +3.3V (VDD) Z1:Z2 (22) IOUTA (21) IOUTB 50 (18) FSADJ RSET (50) REPRESENTS ANY 50 LOAD NC (15) SLEEP (16) REFLO (17) REFIO 0.1 µF ONE CONNECTION DCOM ACOM(LSB) D8 D9 INPUT LATCH SWITCH MATRIX 40 CASCODE CURRENT SOURCE
PIN NO. PIN NAME D13 (MSB) Through D0 (LSB) SLEEP REFLO REFIO FSADJ NC IOUTB IOUTA COMP AV DD ACOM DCOM DV DD CLK DESCRIPTION Digital Data Bit 13, (Most Significant Bit) through Digital Data Bit 0, (Least Significant Bit). Control Pin for Power-Down mode. Sleep Mode is active high; Connect to ground for Normal Mode. Sleep pin has internal 20µA active pulldown current. Connect to analog ground to enable internal 1.2V reference or connect to AVDD to disable internal reference. Reference voltage input if internal reference is disabled. Reference voltage output if internal reference is enabled. Use 0.1µF cap to ground when internal reference is enabled. Full Scale Current Adjust. Use a resistor to ground to adjust full scale output current. Full Scale Output Current 32 x VFSADJ/RSET. No Connect. These should be grounded, but can be left disconnected. The complementary current output of the device. Full scale output current is achieved when all input bits are set to binary 0. Current output of the device. Full scale output current is achieved when all input bits are set to binary 1. Connect 0.1µF capacitor to ACOM. Analog Supply to +3.6V). Connect to Analog Ground. Connect to Digital Ground. Digital Supply to +3.6V). Clock Input.
|Some Part number from the same manufacture Intersil Corporation|
|ISL59612IB 14-bit, +3.3v, 130/210msps, Commlinktm High Speed D/A Converter|
|ISL5961EVAL1 14-Bit, +3.3V, 210MSPS, Commlink High Speed D/A Converter (TSSOP)|
|ISL60002 Precision 1.25V & 2.50V Low Voltage Fga References: <<<>>>The ISL60002 Fga Voltage References Are Very High Precision Analog Voltage References Fabricated in Intersil's Proprietary Floating Gate Analog|
|ISL6111 Current Regulated Pci Hot Plug Power Switch Controller <<<>>> <<<>>>The ISL6111 is Designed For Use in Pci And Pci-x Applications Where Active Current Regulation Protection of The Motherboard From an Abnormal|
|ISL6115 Power Distribution Controllers|
|ISL6118 2.5V to 5V Dual Power Supply Controller With 0.6A Integrated Current Regulation And Timed Delay to Latch-off|
|ISL6118LIB Dual Power Supply Controller|
|ISL6119 Usb Dual Port Power Supply Controller|
|ISL6120 Power Distribution Controllers|
|ISL6121 Single Supply Integrated Current Limiting Controller|
|ISL6123 Power Sequencing Controllers|
|ISL6131 Multiple Voltage Supervisory Ics|
|ISL6140 Negative Voltage Hot Plug Controller|
HA4314BCA96 : 400MHz, 4 X 1 Video Crosspoint Switch
HUF76139S3S : 75A, 30V, 0.0075 Ohm, N-Channel, Logic Level UltraFET Power MOSFETs
ICL8069DC : 0 to 5V Low Voltage Reference
ISL6235CA : Portable Advanced Triple PWM Only Mode And Dual Linear Power Controller For Portable Applications
ISL6527IR : Desktop Single Synchronous Buck Pulse-width Modulation (PWM) Controller
ISL6536IB-T : Supervisory IC, 4 Channel The ISL6536 is a Four Channel Supervisory ic Designed to Monitor Voltages >, = 0.7V. This ic Bias Range is From 2.7V to 4V But CAN Supervise Any Positive Voltage Using an External Resistor Divider to Translate to a Lower Voltage For Comparison to The Internal 0
HS-139RH_04 : Radiation Hardened Quad Voltage Comparator
ISL95837HRZ : 3+1 And 1+1 Voltage Regulator For IMVP-7/VR12™ CPUs Compliant with IMVP-7/VR12™, the ISL95835 provides a complete solution for microprocessor and graphic processor core power supply. It provides two Voltage Regulators (VRs) with three integrated gate drivers. The first VR can be configured as 3-,
ISL78301FVECZ-T : 40V, Low Quiescent Current, 150mA Linear Regulator For Automotive Applications The ISL78301 is a high voltage, low quiescent current linear regulator ideally suited for always-on and keep alive automotive applications. The ISL78301 operates from an input voltage of +6V to +40V under normal operatin
HIN232EIBN-T : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tube 4.5 V ~ 5.5 V; IC 2DRVR/2RCVR RS232 5V 16-SOIC Specifications: Number of Drivers/Receivers: 2/2 ; Type: Transceiver ; Voltage - Supply: 4.5 V ~ 5.5 V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Protocol: RS232 ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant
ISL70218SRHMF : DUAL OP-AMP, 3.2 MHz BAND WIDTH, CDFP10 Specifications: Supply Voltage (VS): 5 volts ; CMRR: 117 dB ; Slew Rate: 1 V/Âµs ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, FLAT PACK-10 ; Number of Pins: 10 ; Number of Devices: 2
5962R9575001V9X : 3 TIMER(S), PROGRAMMABLE TIMER, CDIP24 Specifications: Bus Interface: CMOS ; Package Type: DIP, SIDE BRAZED, METAL SEALED, CERAMIC, DIP-24 ; Supply Voltage: 4.5 to 5.5 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F)
AN7354SC : Cassette Deck. Package =. The an IC for 2 ch. Dolby B/C-Type noise reduction process. It requires fewer external parts and incorporates the functions of line-output muting and level detection and the delay circuit. Line-output muting circuit built-in PB input delay circuit built-in Built-in level detection circuit for automatic level adjustment and level meter ON/OFF of NR, B-/C-type,.
CXA2534Q : CD Signal Processor. 4-Channel CD Motor Driver. a 4-channel H-bridge motor driver IC designed for portable CD systems. It has a built-in to DC converter controller that allows voltage step-up to typically 3.2 V; this voltage can be used to power the system DSP, SSP and micro-controller. In addition, it also provides a PWM regulated power supply to the H-bridge output stage as to ensure high efficiency.
LM6310 : Video Power Amp. High Speed Low Power Operational Amplifier With Tri-state Output (discontinued).
MX7578BD : Calibrated 12-bit A/D Converter.
NJM2574 : Low Voltage Video Amplifier With LPF. sGENRERAL The is a Low Voltage Video Amplifier contained LPF circuit, 75 driver and internal CLAMP/BIAS SW, LPF/through SW to connect TV monitor directly. The input composite signal.(0.5Vpp) The mute circuit with power save function is suitable for low power design. The NJM2574 is suitable for down sizing of Digital Steel Camera, and DVC for small package.
STV0676 : Imaging Digital Signal Processor. The STV0676 co-processor combined with ST CMOS image sensors offers highly integrated imaging products which deliver USB 1.1, RGBpreview, YCrCb or M-JPEG digital video data to 30 frames per second. The STV0676 interfaces to CIF 288) or VGA x 480) image sensor and performs: - pixel defect correction, - auto exposure, auto gain, - auto white balance,.
TDA4565 : Chroma. Color Transient Improvement Circuit. Product File under Integrated Circuits, IC02 November 1989 The is a monolithic integrated circuit for colour transient improvement (CTI) and luminance delay line in gyrator technique in colour television receivers. Colour transient improvement for colour difference signals (R-Y) and (B-Y) with transient detecting-, storage- and switching stages resulting.
TDA7496SA : 5W+5W Amplifier With DC Volume Control. 5+5W OUTPUT POWER = 8 @THD = 10% VCC = 22V ST-BY AND MUTE FUNCTIONS LOW TURN-ON TURN-OFF POP NOISE LINEAR VOLUME CONTROL DC COUPLED WITH POWER OP. AMP. NO BOUCHEROT CELL NO ST_BY RC INPUT NETWORK SINGLE SUPPLY RANGING TO 35V SHORT CIRCUIT PROTECTION THERMAL OVERLOAD PROTECTION INTERNALLY FIXED GAIN SOFT CLIPPING VARIABLE OUTPUT AFTER VOLUME CONTROL.
TDA8376H : Deflection. Objective File under Integrated Circuits, IC02 1996 Jan 26 CONTENTS GENERAL QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM PINNING FUNCTIONAL Video switches Integrated video filters, peaking and black stretcher Synchronization circuit Colour decoder RGB output circuit and black-current stabilization I2C-BUS Start-up procedure Inputs Input control.
TDA8943 : TDA8943SF; 6 W Mono Bridge Tied Load (BTL) Audio Amplifier;; Package: SOT110-1 (SIL9MPF).
TEA6842H : New in Car Entertainment (NICE) Extended Car Radiothe TEA6842H is a Single ic With Car Radio Tuner For AM, FM And Weather Band (WB) Intended For Microcontroller Tuning With The i C-bus. It Provides The Following Functions: AM Double Conversion Receiver For LW, MW And SW (31 m, 41 M And 49 M Bands) With IF1 = 10.7 MHZ And IF2 = 450 KHZ FM Single Conversion.
WM8955 : WM8955 : Stereo DAC For Portable Audio Applications.
SSM2167 : Low Voltage Microphone Preamplifier With Variable Compression And Noise Gating The SSM2167 is a complete and flexible solution for conditioning microphone inputs in personal electronics and computer audio systems. It is also excellent for improving vocal clarity in com- munications and public address systems. A low noise voltage controlled amplifier.
LA2616V : Featuring The AViSS 3D Surround Algorithm Analog Surround IC Featuring the AViSS 3D Surround Algorithm Analog Surround IC.
MAX9680 : 3V Video Amplifier With Internal Gain And Filter In SC70 The MAX9680 high-speed amplifier and filter is optimized for portable video applications. It is specifically designed to be compatible with the video encoders embedded in application processors with 0.4VP-P video output. The input common-mode range includes GND, which allows a video DAC (digital-to-analog.