Details, datasheet, quote on part number: MADCSM0011
CategoryRF & Microwaves => Up/Down Converters
Description Dual Mode Cellular Downconverter, 869 - 893 MHZ
CompanyM/A-COM, Inc.
DatasheetDownload MADCSM0011 datasheet
Find where to buy


Features, Applications


Dual Mode Downconverter with LO Amplifier 3mm FQFP-N Plastic Package Operates over 5 V Supply Voltage High Gain: 12.5 dB Typical High Input Intercept Point: +8 dBm Typical Low Current Draw: 12 mA Typical Adjustable IP3 Level Low LO Drive Level: -10 dBm


M/A-COM's MADCSM0011 integrated downconverter combines a downconverting mixer, an IF amplifier, a LO buffer amplifier and an output mode switch. The MADCSM0011 is packaged in a low cost 3mm FQFP-N plastic package with an exposed pad for improved high frequency grounding. M/A-COM designed the MADCSM0011 for handsets requiring wide dynamic range and low power consumption. A mode switch is incorporated into the MADCSM0011 to switch between CDMA and AMPs operation. The MADCSM0011 is fabricated using M/A-COM's 0.5-micron low noise E/D GaAs MESFET process. The process features full passivation for increased performance and reliability.

Parameter Conversion Gain Noise Figure Input Intercept Point Return Loss Isolation Idd 1. All measurements are for both output modes. Test Conditions LO Pin = -10 dBm LO Pin = -10 dBm LO Pin = -10 dBm RF, LO Pin = -10 dBm LO, LO Pin = -10 dBm RF to IF, LO Pin = -10 dBm LO to IF, LO Pin = -10 dBm LO Pin = -10 dBm Units dB dBm dB mA Min Typ Max 15

DC and RF Ground LOA supply voltage; RF bypassing required Parallel RC network determines the IFA Current, Gain and IIP3 CDMA IF Output of downconverter; IF matching required DC and RF Ground AMPs IF Output of downconverter; IF matching required Selects between AMPs and CDMA IF Output IFA supply voltage; RF bypassing required IFA Input

Part C1 C2 Value nH 34 ohms Purpose Mixer Input RF Matching Mixer to IFA Matching Vdd Bypass IFA Source Bypass IFA Output Matching IFA Output Matching Vmode Bypass Mixer Input RF Matching Mixer to IFA Matching LOA Input Matching LOA Matching IFA Output Matching IFA Source Resistor

Parameter Voltage Input Power Operating Temperature Storage Temperature Absolute Maximum 6V 0 dBm to +150C

2. Exceeding any one or combination of these limits may cause permanent damage to this device.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit for additional data sheets and product information.

2 n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. 300 020

M/A-COM's is a highly integrated MMIC dual mode downconverter for operation in the 800900 MHz Cellular frequency band. The downconverter provides exceptional RF performance while consuming low DC current and is packaged in a low cost plastic package. It is ideal for lightweight battery operated portable radio systems. The MADCSM0011 consists of a single-ended mixer, an LO buffer amplifier, a single-ended IF amplifier and a mode switch. Surface mount resistors, inductors and capacitors are used in conjunction with the downconverter to optimize the trade-offs among performance, tunability and ease of use. The sample board schematic shows the downconverter and required off-chip components. The mixer is a single-ended mixer that provides exceptional linearity and isolation with low loss and no DC current. An off-chip inductor (L2) and capacitor (C2) are required to match the output of the mixer to the input of the IF buffer amplifier. The IF output is selected by the mode switch. Each output port is the open drain of the IF buffer amplifier. This allows maximum flexibility of the intermediate frequency and IF filter. A matching network such as that shown herein can be used to match to 50 ohms from the output impedance of the buffer to the input impedance of the filter at the 85.38 MHz intermediate frequency. The inductor also acts as a choke for the DC supply line. Elements L5, C6 and C7 (CDMA mode) and L6, C8 and C9 (AMPS mode) provide the necessary impedance transformations. The LO input port is matched on-chip to 50 ohms. An LO buffer amplifier amplifies the 10 dBm input signal to the level required to drive the mixer. The performance is optimum with a drive level of 7 dBm. All DC supply lines must be properly bypassed at RF frequencies to obtain optimum performance and at a lower frequency to maintain unconditional stability. Capacitors C10, C11 and C12 are RF bypass capacitors for the IFA and LOA. The value and placement of these capacitors is critical in determining the frequency response of these amplifiers.

3 n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. 300 020


Related products with the same datasheet
Some Part number from the same manufacture M/A-COM, Inc.
MADCSM0011SMB  Dual Mode Cellular Downconverter, 869 - 893 MHZ
MADCSM0012  PCS LNA/Downconverter, 1800 - 2000 MHZ
MADRCC0002 Dual Linear Driver For Vector Modulators
MAFLES0083  E-Series (DOCSIS) Catv Diplexer 5 - 1000 MHZ
MAFRIN0034 Miniature Surface Mount Dual ISOlators
MAFRIN0035  Miniature Surface Mount Dual ISOlators
MAFRIN0037 Miniature Drop-in Dual ISOlators
MAFRIN0124 Drop-in High Power ISOlators
MAFRIN0149  Miniature Surface Mount Circulators
MAFRIN0160  Drop-In, High Power, Low Intermod ISOlators
MAFRIN0203  Miniature Surface Mount ISOlators
MAMDCC0002  Vector Modulator, 1.805 to 1.88 GHZ (DCS) And 1.93 to 1.99 GHZ (PCS)
MAMDCC0005  Vector Modulator, 925 to 960 MHZ
MAMDES0002 E-series I/q Demodulator 851-869 MHZ
MAMDES0003 E-series I/q Modulator 1805 - 1880 MHZ
Same catergory

2SC3862 : Bipolar Transistors. Vceo (V) = 15 ;; Ic (mA) = 50 ;; PC (mW) = 150 ;; Cob (pF) = - ;; Cre (pF) = 0.6 ;; .fT(Typ.) (GHz) = 2.4 ;; Package = S-mini ;; Application = UHF Mixer/osc.

30055 : = 90° / 180° Hybrid Couplers ;; Size LXWXH = 3.0 X 2.25 X 0.5" ;; Packaging = Aluminum Cased ;; Frequency MHZ = 1000-2000 ;; Power Handling Watts = 150.

AA103-72 : Digital Attenuator. GAAS ic 1 Bit Digital Attenuator 10 DB. Attenuation Cutback 10 dB Single Positive 3 V Control Low Loss Low Cost SOT-5 Plastic Package The a 1 bit GaAs IC FET digital attenuator in a low cost package. This attenuator has an LSB of 10 dB. The AA103-72 is particularly suited where high attenuation accuracy, low insertion loss and low intermodulation products are required. Typical applications.

AM55-0024 : LNAs. 100-400 Mhz, hi DYN Range 2 Channel if Amplifier With Power Control.

AS006L2-93 : . Low DC Power Consumption Low Loss Broadband DC6 GHz Excellent Intermodulation Products Small Low Cost "Chip on Board" Package The is a GaAs IC FET SPDT low loss reflective switch. This broadband switch operates from DC6 GHz. It is ideal for surface mount applications when requirements call for low insertion loss and medium isolation. Parameter Switching.

DS52-0008 :  E-Glass 2-Way SMT Power Splitter/combiner 824 - 960 MHZ. Small Size and Low Profile Industry Standard SOT-26 SMT Plastic Package Typical Isertion Loss: 0.6dB Typical Isolation: 15dB 1 Watt Power Handling M/A-COM's is an IC-based monolithic power divider using M/A-COM's GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion.

EIN11 : Inductors.  E-Series SMT Inductor 165 NH. M/A-COM's is a high Q Toroidal Inductor an SM-52 package. This Inductor is particularly suited to applications requiring Inductors with good magnetic field containment. Parameter Typical > 580 MHz Minimum 90 Guaranteed Performance @ 50 MHz Inductance Value Q Value Self Resonance Parameter RF Power DC Current Operating Temperature Storage Temperature.

M86 :  Double Balanced Mixer. DOUBLE-BALANCED MIXER TO 18 GHz TO 18 GHz TO 3000 MHz LO DRIVE +7 dBm (nominal) WIDE BANDWIDTH DC COUPLED I-PORT SSB Conversion Loss & SSB Noise Figure (max.) to 16 GHz, to 17 GHz, to 1000 GHz to 18 GHz, to 18 GHz, to 1000 GHz to 18 GHz, to 18 GHz, to 3000 GHz fI = Isolation (min.) to 14 GHz to 18 GHz to 9 GHz to 18 GHz 1 dB Conversion Compression @ +7 dBm fL @ Input.

MAMXES0040 :  E-Series SMT Schottky Mixer 125 - 208 MHZ. M/A-COM's is a Low Cost,Broadband,high Performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. MAMXES0040 is available an SM-89 surface mount package and reflows using standard soldering reflow profiles.

MHW7205CR : MHW7205CR 20.2 DB Gain, 750 Mhz, 110-Channel Catv Amplifier - Archived.

MMM5062R2 : Amplifiers->Power Amplifiers. MMM5062 Technical Data Sheet: Quad-band GSM GPRS 3.5 V Power Amplifier.

UPF1030 : Ldmos Fets in Class ab Operation Cellular to 1 GHZ.

CM1450 : The CM1450 comprises a family of inductor-capacitor (L-C) based EMI filter arrays with integrated ESD protection in a CSP form factor. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each EMI filter channel of the CM1450 is implemented as a 5-pole L-C filter where the component values are 14pF-17nH-14pF-17nF-14pF.

HMC174MS8E : GaAs MMIC I/Q MIXER MODULE 20 - 31 GHz The HMC-C046 is a passive I/Q MMIC mixer housed ? Military End-Use in a miniature hermetic module which can be used as either an Image Reject Mixer (IRM) or a Single Side- Functional Diagram band Upconverter. The module utilizes two standard MIXERS Hittite double balanced mixer cells and a 90 degree hybrid fabricated.

ZX30-20-462HP+ : Bi-Directional Coupler 2600 To 4600 MHz Bi-Directional Coupler 2600 to 4600 MHz.

0-C     D-L     M-R     S-Z