Details, datasheet, quote on part number: DS9092T#
PartDS9092T#
CategoryASSP (Application-Specific Standard Products) => iButtons
DescriptionIButton Probe
The DS9092 iButton® probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton\'s MicroCan package. Metal contacts resist wear and are easy to keep clean.

The DS9092 is available with a flat faceplate (standard) or with optional tactile feedback. The center contact of the standard reader has no moving parts, making this a more rugged interface for harsh environments. This type of probe is best suited for designs where the iButton is brought into contact with the reader.
CompanyMaxim Integrated Products
DatasheetDownload DS9092T# datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Simple, low-cost metal stampings form a read/write probe for the iButton family Probe guides the entry of the iButton slides over the surface to self-clean contacts Accessible shallow probe cavity simplifies removal of debris such as mud Flexible design supports panel mount or hand-grip mount with optional tactile feedback Bright tarnish-resistant metal surface provides millions of operations Panel-mount probe, pre-wired for easy installation Hand-grip probe mates to RJ-11 jack for quick installation DS9092 probes both F3 and F5 cans. Extra consideration is required for operation with the F3 can. The attachment method of the F3 can must not interfere with the cavity dimensions of the probe, otherwise the data signal will not make contact.

DS9092T# DS9092GT# Panel-mount probe, solid face Panel-mount probe with tactile feedback Hand-grip mount with tactile feedback

+Denotes a lead(Pb)-free/RoHS-compliant product. # Denotes an RoHS-compliant device that may include lead(Pb) that is exempt under the RoHS requirements.

DESCRIPTION

The DS9092 iButton Probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton's MicroCan package. Metal contacts resist wear and are easy to keep clean. The DS9092 is available with a flat faceplate (standard) or with optional tactile feedback. The center contact of the standard reader has no moving parts, making this a more rugged interface for harsh

iButton is a registered trademark of Maxim Integrated Products, Inc.

environments. This type of probe is best suited for designs where the iButton is brought into contact with the reader. The tactile feedback probe is ideal for situations where the iButton is stationary and the movable reader is brought in contact with it. Both types of probes are available in a panel-mount version. The tactile feedback probe is also available in a grip-mount version. The panel-mount probes are fastened behind the panel with a push-on type spring nut. The two cm 22AWG wires are provided for easy connection to the system microcontroller. The handgrip mount probe comes attached 10 cm handle and 1-meter cable which is terminated with an RJ11 jack.

REVISION DATE 8/09 DESCRIPTION Added plus signs and # in the Ordering Information to indicate which products have been converted into lead-free or RoHS-compliant devices. PAGES CHANGED 1


 

Related products with the same datasheet
DS1992
DS9092+
DS9092/NO-BRAND
DS9092GT
DS9092GT+
DS9092GT#
DS9092GT/NO-BRAND
DS9092T
DS9092T/NO-BRAND
Some Part number from the same manufacture Maxim Integrated Products
DS9092T/NO-BRAND IButton ProbeThe DS9092 iButton® probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface
DS9093A IButton Key Ring MountsThe DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying.
DS9096P IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached
MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192
MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering
MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each
MAX9672EVKIT+
MAX9672ETI+
MAX9672ETI+T
MAX9673
MAX9673ETI+
MAX9673ETI+T
MAX9674
MAX9674ETI+T
MAX9674ETI+
DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data
DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides
DS9092R IButton PortThe DS9092R iButton® port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire® MicroLAN™ devices with reader/writers. The iButton port is available
DS9097 COM Port AdapterThe DS9097 COM port adapter is a simple, low-cost passive adapter which performs RS-232C (±12V) level conversion, allowing an iButton® probe to be connected to the serial port of a computer
DS9097U Universal 1-Wire COM Port AdapterThe DS9097U is a sophisticated RS232 to 1-Wire® adapter, which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with
DS9106L IButton HaloThe DS9106 iButton® halos are 0.25mm, thin vinyl highlighters that slide over an iButton that is to be labeled with text, picture, or numeric information. The halo is retained by a friction

MAX1490EBCPG : 15kV ESD-Protected, ISOlated RS-485/RS-422 Data Interfaces

MAX2264EUE : 2.7v, Single-supply, Cellular-band Linear Power Amplifiers

MAX9159ESA : Dual LVDS Line Receiver

DG413DJ+ : Improved, Quad, SPST Analog Switches Maxim\'s redesigned DG411/DG412/DG413 analog switches now feature low on-resistance matching between switches (3? max) and guaranteed on-resistance flatness over the signal range (?4? max). These low on-resistance switches conduct equally well in either directio

MAX6319LHUK45A-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX2135AETN+ : ISDB-T/DVB-T Diversity Tuner The MAX2135A low-power, 6MHz ISDB-T and 6MHz/7MHz/8MHz DVB-T low-IF diversity tuner directly converts broadcast ISDB-T and DVB-T signals to a low-IF using a broadband I/Q downconverter. The operating frequency range covers the VHF and UHF broadcast TV bands from 90MHz t

MAX6386XS39D3 : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou

MAX6472TA30BD1 : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, DSO8 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, 0.80 MM HEIGHT, MO-229WEEC, TDFN-8 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

 
0-C     D-L     M-R     S-Z