Details, datasheet, quote on part number: DS9093N+
PartDS9093N+
CategoryASSP (Application-Specific Standard Products) => iButtons
DescriptionIButton Key Ring Mounts
The DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability.

The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan® only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton can be locked by a DS9093RA Lock Ring.

The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting. The DS9093A is available in black, blue, green, red, and yellow.
CompanyMaxim Integrated Products
DatasheetDownload DS9093N+ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Low-cost key ring mounts that hold an iButton® for thumbpad applications. Key ring mount versions: DS9093A snap-in angled fob for use with F5 MicroCan®. DS9093F snap-in fob for use with F5 MicroCan. DS9093N angled fob for use with F5 MicroCan.

iButton and MicroCan are registered trademarks of Maxim Integrated Products, Inc.
DESCRIPTION

The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability. The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton can be locked a DS9093RA Lock Ring. The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting. The DS9093A is available in black, blue, green, red, and yellow.

REVISION DATE 8/09 DESCRIPTION Replaced the third Features bullet with an Ordering Information table that also specifies the color of the DS9093F and DS9093N. Added a plus sign to each part number, indicating a lead-free product. PAGES CHANGED 1


 

Related products with the same datasheet
DS9093AY+
DS9093AR+
DS9093AG+
DS9093AB+
DS9093A+
DS9093A
DS9093AB
DS9093AG
DS9093AR
DS9093AY
DS9093F
DS9093F+
Some Part number from the same manufacture Maxim Integrated Products
DS9093N/NO-BRAND IButton Key Ring MountsThe DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying.
DS9096P IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached
MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192
MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering
MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each
MAX9672EVKIT+
MAX9672ETI+
MAX9672ETI+T
MAX9673
MAX9673ETI+
MAX9673ETI+T
MAX9674
MAX9674ETI+T
MAX9674ETI+
DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data
DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides
DS9092R IButton PortThe DS9092R iButton® port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire® MicroLAN™ devices with reader/writers. The iButton port is available
DS9097 COM Port AdapterThe DS9097 COM port adapter is a simple, low-cost passive adapter which performs RS-232C (±12V) level conversion, allowing an iButton® probe to be connected to the serial port of a computer
DS9097U Universal 1-Wire COM Port AdapterThe DS9097U is a sophisticated RS232 to 1-Wire® adapter, which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with
DS9106L IButton HaloThe DS9106 iButton® halos are 0.25mm, thin vinyl highlighters that slide over an iButton that is to be labeled with text, picture, or numeric information. The halo is retained by a friction
DS9093RA IButton Plastic Card MountsThe DS9093RA Lock Ring is a stainless-steel fastener that provides an inexpensive method for firmly attaching an iButton® to any item with a pre-punched hole. The iButton is inserted

MAX122BMRG : 500ksps, Sampling, 12-Bit ADC With Track/hold And Reference

DS2422 : 1-Wire Temperature/Data Logger with 8kB Datalog Memory The DS2422 temperature/data logger combines the core functions of a fully featured data logger in a single chip. It includes a temperature sensor, real-time clock (RTC), memory, 1-Wire® interface, and serial interface for an analog-to-digital

MAX6310UK28D3-T : 5-Pin, Multiple-Input, Programmable Reset ICs The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplie

MAX1026BCEE+T : 10-Bit 300ksps ADCs With FIFO, Temp Sensor, Internal Reference The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and

MAX6381XS29D2-T : Sc70, Single/dual Low-voltage, Low-power ĄěP Reset Circuits

MAX6389XS29D1-T : Sc70, Single/dual Low-voltage, Low-power ĄěP Reset Circuits

MAX171AEPE : Opto-isolated Serial Output 5.8us 12-bit A/D Converter

MAX6476UT24BD3-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

MAX6865UK21D2S+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 40 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.1V ; Operating Temperature: -40°C ~ 85°

MAX6382XR33D5 : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou

MAX6383LT36D5+T : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou

MAX6469UT22BD3-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: SOT23, Other, MO-178AB, SOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

 
0-C     D-L     M-R     S-Z