Details, datasheet, quote on part number: DS9096P+
PartDS9096P+
CategoryASSP (Application-Specific Standard Products) => iButtons
DescriptionIButton Adhesive Pads
The DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached to virtually any smooth surface. The DS9096P offers an excellent long-term holding power for use in many interior and exterior industrial applications.

The DS9096P works best on low surface energy substrates, including most metal, sealed wood and glass, as well as many plastics, composites, and painted surfaces. Porous (e.g., concrete) or fiberous materials (e.g., wood) will require sealing to provide a unified surface. Materials such as copper, brass, plasticized vinyl may require priming or coating to prevent interaction between adhesive and substrate. Bonding to glass, ceramic tile or other hydrophilic surfaces in a high humidity environment may require the use of a silane coupling-agent to help ensure a long-term bond. Rough surfaces created by light abrasion may actually be detrimental to bond strength.
CompanyMaxim Integrated Products
DatasheetDownload DS9096P+ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Low-cost permanent attachment method for iButton Readily attaches iButton to any smooth flat surface Available in die-cut rolls of 500/roll with a core inner diameter mm (3 inch) Excellent U.V. resistance in outdoor weathering tests and weather-o-meter tests 24 months shelf life at 21°C and 50% relative humidity Ideal application temperature to 38°C; minimum application temperature 10°C; maximum long term temperature 71°C Roll of 500 Adhesive Pads

The is a made of white, double-coated acrylic VHB foam tape (3M part number 4932) that is die-cut to match the diameter of iButton devices. The pads allow iButtons to be attached to virtually any smooth surface. The DS9096P offers an excellent long-term holding power for use in many interior and exterior industrial applications. The DS9096P works best on low surface energy substrates, including most metal, sealed wood and glass, as well as many plastics, composites and painted surfaces. Porous (e.g., concrete) or fiberous materials (e.g., wood) will require sealing to provide a unified surface. Materials such as copper, brass, plasticized vinyl may require priming or coating to prevent interaction between adhesive and substrate. Bonding to glass, ceramic tile or other hydrophilic surfaces in a high humidity environment may require the use of a silane coupling-agent to help ensure a long-term bond. Rough surfaces created by light abrasion may actually be detrimental to bond strength. Before applying the DS9096P, clean the surface of the objects thoroughly with a mixture of 50% isopropyl alcohol and 50% water and wipe it dry. Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesion contact and thus improves bond strength. For good surface contact apply enough pressure to ensure that the tape experiences approximately 15 psi (100 kPa). Typically, uniform thumb pressure on the iButton will achieve the desired result. At room temperature approximately 50% of the ultimate bonding strength is achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. For complete tape information see http://www.3m.com/bonding/pdf/501622.pdf

"VHB" is a trademark of 3M. iButton is a trademark of Maxim Integrated Products, Inc.
DESCRIPTION
REVISION DATE 8/09 DESCRIPTION Added an Ordering Information table. PAGES CHANGED 1

 

Related products with the same datasheet
DS9096P/NO-BRAND
Some Part number from the same manufacture Maxim Integrated Products
DS9096P/NO-BRAND IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached
MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192
MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering
MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each
MAX9672EVKIT+
MAX9672ETI+
MAX9672ETI+T
MAX9673
MAX9673ETI+
MAX9673ETI+T
MAX9674
MAX9674ETI+T
MAX9674ETI+
DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data
DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides
DS9092R IButton PortThe DS9092R iButton® port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire® MicroLAN™ devices with reader/writers. The iButton port is available
DS9097 COM Port AdapterThe DS9097 COM port adapter is a simple, low-cost passive adapter which performs RS-232C (±12V) level conversion, allowing an iButton® probe to be connected to the serial port of a computer
DS9097U Universal 1-Wire COM Port AdapterThe DS9097U is a sophisticated RS232 to 1-Wire® adapter, which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with
DS9106L IButton HaloThe DS9106 iButton® halos are 0.25mm, thin vinyl highlighters that slide over an iButton that is to be labeled with text, picture, or numeric information. The halo is retained by a friction
DS9093RA IButton Plastic Card MountsThe DS9093RA Lock Ring is a stainless-steel fastener that provides an inexpensive method for firmly attaching an iButton® to any item with a pre-punched hole. The iButton is inserted
MAX5972A IEEE 802.3af/at-Compliant, Powered Device Interface Controllers With Integrated Power MOSFETThe MAX5972A/MAX5972B provide a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/at

MAX1582ETC : MAX1582 High-Efficiency, 26V Step-up Converter For White Led Main And Subdisplay Backlighting

MAX4202EUK-T : Ultra-High-Speed, Low-Noise, Low-Power, SOT23 Open-loop Buffers

MXL1014IS : Dual/Quad, Precision op Amps

MAX6720AUTVHD4+ : Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (??P) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its fac

DS1973-F3# : 4Kb EEPROM IButton® The DS1973 4Kb EEPROM iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware, for example a single port pin of a micro-controller. The

MAX4917AEUK+T : 100mA/200mA/300mA Current-Limit Switches With Low Shutdown Reverse Curren The MAX4914B/MAX4915A/B/MAX4917A/B family of switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These analog switches have a low 0.2? on-resistance and operate from a 2

MAX6733UTTZD5-T : Single-/Dual-/Triple-Voltage µP Supervisory Circuits With Independent Watchdog Output The MAX6730–MAX6735 single-/dual-/triple-voltage microprocessor (µP) supervisors feature a watchdog timer and manual reset capability. The MAX6730–MAX6735 offer factory-set reset thresholds for monitoring voltages

MAX6316MUK46DY-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX6319MHUK40A-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX6322HPUK48C-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX6469TA33AD1-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

MAX6472TA21AD4-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

 
0-C     D-L     M-R     S-Z