Details, datasheet, quote on part number: DS9098P-TRL+
PartDS9098P-TRL+
CategoryASSP (Application-Specific Standard Products) => iButtons
DescriptionIButton Retainer
The DS9098P iButton® Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed circuit board. It consists of three metal pieces (two for ground, one for data) molded into a body of black, heat-stabilized, glass fiber reinforced liquid crystal polymer.

When inserting an iButton into the DS9098P, closely align axis of the iButton and the retainer. The retainer then latches the flange of the iButton. At removal, limit deflection of retainer latches to just free the iButton edge from retained state. Avoid applying excess force to latches.

The DS9098P is only available on tape and reel. The tape specifications match those of 68-lead PLCC devices except for the deeper pockets and tape-feed sprockets on either side of the 44mm tape. Alignment pedestals keep the part oriented on tape with the latches adjacent to the sprockets.
CompanyMaxim Integrated Products
DatasheetDownload DS9098P-TRL+ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Compact receptacle for F5 iButton mounting Fully backward-compatible to DS9098 Contacts are stainless steel with selective tinlead plating for optimal solderability to printed circuit board Retainer to iButton connection is stainless steel to stainless steel Withstands to +250°C for surface mounting Double redundancy of contacts (2 plus 2) Contact force exceeds 2N for reliable connection Prevents reversed insertion At insertion, the iButton is latched for retention The iButton pops up for removal when latch is released Gentle deflection of latches allows removal of the iButton > 25 insertion/withdrawal cycles with no performance degradation Compatible with standard pick and place equipment Cleaning fluids drain freely for quick cleanup

Data Trace Ground Trace between Pads
PART DS9098P-TRL+ DESCRIPTION Tape and reel, 220 parts per 13in reel
Copper cladding 0.3 kg/m ( 1oz/sq.ft) with soldermask overlay. All dimensions are in millimeters.
DESCRIPTION

The DS9098P iButton Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed circuit board. It consists of three metal pieces (two for ground, one for data) molded into a body of black, heat-stabilized, glass fiber reinforced liquid crystal polymer. When inserting an iButton into the DS9098P, closely align axis of the iButton and the retainer. The retainer then latches the flange of the iButton. At removal, limit deflection of retainer latches to just free the iButton edge from retained state. Avoid applying excess force to latches. The DS9098P is only available on tape and reel. The tape specifications match those of 68-lead PLCC devices except for the deeper pockets and tape-feed sprockets on either side of the 44mm tape. Alignment pedestals keep the part oriented on tape with the latches adjacent to the sprockets.

iButton is a registered trademark of Maxim Integrated Products, Inc.

REVISION DATE DESCRIPTION Added coplanarity specification of contact tabs to the data sheet (only affects graphic). 022008 Minor formatting adjustments (only affects graphic). Changed "30% glass fiber reinforced Nylon 46" to "glass fiber reinforced liquid crystal polymer." 8/09 Added lead(Pb)-free status to the Ordering Information PART information. 1 PAGES CHANGED

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, 94086 408-737-7600
© 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.

 

Related products with the same datasheet
DS9098P-C01+
DS9098P-U0W+
DS9098P-TRW+
Some Part number from the same manufacture Maxim Integrated Products
DS9101 Multipurpose ClipThe DS9101 multipurpose clip offers the user a low-cost fixture that mounts an iButton® to a plastic badge or, using an additional wire or tie wrap, any object that provides a hole for strap-mounting.
DS9105 IButton Number SetUnlike conventional keypads, where data is entered by pressing a mechanical key, the solid buttons of an iButton® keypad allow users to enter data by simply touching each button with
DS1921H High Resolution Thermochron IButton Range H: +15°C To +46°C; Z: -5°C To +26°CThe DS1921H/Z Thermochron® iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected
DS9490 USB To 1-Wire/iButton AdapterThe DS9490B is a USB bridge and holder for a single F5-size iButton®. The iButton is securely held behind a latched door. The DS9490R is a USB bridge with 1-Wire® RJ11 interface
MAX1192 Ultra-Low-Power, 22Msps, Dual 8-Bit ADCThe MAX1192 is an ultra-low-power, dual, 8-bit, 22Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H)
DS1977 Password-Protected 32KB EEPROM IButtonThe DS1977 is a 32KB EEPROM in a rugged iButton® enclosure. Access to the memory can be password protected with different passwords for read-only and full access.
DS1990R Serial Number IButtonThe DS1990R Serial Number iButton® is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire®
MAX4826 50mA/100mA Current-Limit Switches With NO-LOAD Flag In µDFNThe MAX4826–MAX4831 family of switches has internal current limiting to prevent host devices from being damaged due to faulty load conditions.
DS1972 1024-Bit EEPROM IButtonThe DS1972 is a 1024-bit, 1-Wire® EEPROM organized as four memory pages of 256 bits each in a rugged iButton® package. Data is written to an 8-byte scratchpad, verified, and then

MAX4523ESE : Quad, Low-voltage SPST Analog Switches

MX7547BQ : CMOS Parallel Loading Dual 12-bit Multiplying D/A Converters

MAX4070ATA+ : Bidirectional, High-Side, Current-Sense Amplifiers With Reference The MAX4069–MAX4072 low-cost, bidirectional, high-side, current-sense amplifiers are ideal for monitoring battery charge and discharge currents in notebooks, cell phones, and other portable equipment. They feature up to 24V input com

LM4040BEX3-5.0+ : Improved Precision Micropower Shunt Voltage Reference With Multiple Reverse Breakdown Voltages The LM4040 is a precision two-terminal shunt mode, bandgap voltage reference available in fixed reverse breakdown voltages of 2.048V, 2.500V, 3.000V, 3.3V, 4.096V, and 5.000V. Ideal for space-critical app

MAX6865UK22D3L+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 150 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.188V ; Operating Temperature: -40°C ~

MAX4674EEE+T : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC MULTIPLEXER QUAD 2X1 16QSOP Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MAX6469UT18BD3-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: SOT23, Other, MO-178AB, SOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

MAX6469UT285AD4-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: SOT23, Other, MO-178AB, SOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

 
0-C     D-L     M-R     S-Z