Details, datasheet, quote on part number: MAX253
PartMAX253
CategoryInterface and Interconnect => RS-485
DescriptionTransformer Driver For Isolated RS-485 Interface
The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-tapped transformer primary from a 5V or 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels up to 1W.

The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-before-make action between the two switches.
CompanyMaxim Integrated Products
DatasheetDownload MAX253 datasheet
Cross ref.Similar parts: SN6501
Quote
Find where to buy
 
  

 

Features, Applications

The is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated or RS-232 data interface. It drives a center-tapped transformer primary from 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels to 1W. The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-beforemake action between the two switches. The SD pin puts the entire device into a low-power shutdown state, disabling both the power switches and oscillator.

Power-Supply Transformer Driver for Isolated RS-485/RS-232 Data-Interface Applications Single or +3.3V Supply Low-Current Shutdown Mode: 0.4µA Pin-Selectable Frequency: 200kHz 8-Pin DIP, SO, and µMAX® Packages

PART MAX253ESA MAX253MJA TEMP RANGE to +125°C PIN-PACKAGE 8 Plastic DIP SO 8 MAX Dice* 8 Plastic DIP SO 8 CERDIP**

Isolated RS-485/RS-232 Power-Supply Transformer Driver High Noise-Immunity Communications Interface Isolated and/or High-Voltage Power Supplies Bridge Ground Differentials Medical Equipment Process Control

*Contact factory for dice specifications. **Contact factory for availability and processing to MIL-STD-883.

µMAX is a registered trademark of Maxim Integrated Products, Inc.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

Supply Voltage to +7V Control Input Voltages (SD, FS).................-0.3V to (VCC + 0.3V) Output Switch Voltage (D1, D2).............................................12V Peak Output Switch Current (D1, D2)......................................1A Average Output Switch Current (D1, D2).........................200mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 9.09mW/°C above +70°C).............727mW SO (derate 5.88mW/°C above +70°C)..........................471mW µMAX (derate 4.10mW/°C above +70°C).....................330mW CERDIP (derate 8.00mW/°C above +70°C)..................640mW Operating Temperature Ranges to +125°C Junction Temperatures MAX253C_ _/E_ _..........................................................+150°C MAX253MJA.................................................................+175°C Storage Temperature to +160°C Lead Temperature (soldering, 10sec).............................+300°C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25°C.) PARAMETER Switch On Resistance Switch Frequency Operating Supply Current (Note 1) Shutdown Supply Current (Note 2) Shutdown Input Threshold Shutdown Input Leakage Current FS Input Threshold FS Input Leakage Current Start-Up Voltage High Low FS = VCC FS = VCC or open 0V No load, 0V, FS low SD = VCC High Low CONDITIONS MIN TYP MAX UNITS kHz pA V

Note 1: Operating supply current is the current used by the MAX253 only, not including load current. Note 2: Shutdown supply current includes output switch-leakage currents.

INCLUDES SWITCH LEAKAGE CURRENTS SHUTDOWN CURRENT (A) 0.8


 

Related products with the same datasheet
MAX253MJA
MAX253C/D
MAX253CPA+
MAX253CPA
MAX253EPA+
MAX253EPA
MAX253CSA+
MAX253CSA
MAX253CSA-T
MAX253CSA+T
MAX253ESA+T
MAX253ESA
Some Part number from the same manufacture Maxim Integrated Products
MAX253MJA Transformer Driver For Isolated RS-485 InterfaceThe MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives
DS1401 Front Panel IButton HolderiButtons® can be conveniently accessed using the DS1401 Front Panel iButton Holder and DS1402 MicroLAN cables.eThe DS1401 is connected to the computer using a DS1402BR8
DS1411 Serial Port IButton HolderThe DS1411 is a sophisticated RS232-to-1-Wire® adapter and iButton® holder that performs RS232-level conversion and actively generates the 1-Wire communication signals. Together
DS1993 1Kb/4Kb Memory IButton®The DS1992/DS1993 memory iButtons (hereafter referred to as DS199_) are rugged read/write data carriers that act as a localized database, easily accessible with minimal hardware.
DS9092 IButton ProbeThe DS9092 iButton® probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface
DS9093A IButton Key Ring MountsThe DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying.
DS9096P IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached
MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192
MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering
MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each
MAX9672EVKIT+
MAX9672ETI+
MAX9672ETI+T
MAX9673
MAX9673ETI+
MAX9673ETI+T
MAX9674
MAX9674ETI+T
MAX9674ETI+
DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data
DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides

MAX4131EUA : Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-supply Rail-to-rail I/o op Amps

MAX5015CSA : Current-mode PWM Controllers With Integrated Startup Circuit For ISOlated Power Supplies

MAX8214BCPE : Five Universal Voltage Monitors - Complete Microprocessor Voltage Monitoring

MAX16072RS20D3+T : µP Supervisory Circuits In 4-Bump (1mm X 1mm) Chip-Scale Package The MAX16072/MAX16073/MAX16074 ultra-small, ultra-low-power, microprocessor (µP) supervisory circuits feature a precision band-gap reference, comparator, and internally trimmed resistors that set the threshold voltage. Designed to mon

MAX6321HPUK38DZ-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX6712REXS+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC RESET MPU W/RESET SC70-4 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: SC-82A, SOT-343 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.63V ; Operating Temperature: -40°C ~ 12

MAX6385LT29D3+T : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou

MAX6386XS44D5+T : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou

MAX211ECAI-T : LINE TRANSCEIVER, UUC28 Specifications: Technology: RS232, CMOS ; Device Type: Transceiver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: DIE ; Pins: 28

MAX6478BL23AD2 : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PBGA6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, UCSP-6 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

ZLR16300P2008G : 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDSO20 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 8 MHz ; ROM Type: MROM ; Supply Voltage: 2 to 3.6 volts ; I/O Ports: 16 ; Package Type: SSOP, Other, SSOP-20 ; Operating Range: Commercial ; Pin Count: 20 ; Operating Temperature: 0 to 70 C (32 to 158 F)

Same catergory

9FHTBJB : 9-pin Female to Terminal Blocks Jumper Box. Enclosed 9-pin to terminal block jumper box includes hardware and wires. Use jumper wires to solder any pin of the 9-pin connector to any one of the 6 terminal clocks. This product designed and manufactured in USA of domestic and imported parts by .

CA3262 : Quad-Gated, Inverting Power Drivers. The CA3262 and CA3262A are used to interface low-level logic to high current loads. Each Power Driver has four inverting switches consisting of a non-inverting logic input stage and an inverting low-side driver output stage. All inputs are 5V TTL/CMOS logic compatible and have a common Enable input. Each output device has independent current limiting.

DS26LV31T : DS26LV31T - 3V Enhanced CMOS Quad Differential Line Driver, Package: Soic Narrow, Pin Nb=16.

DS90LV017A : Line Drivers, Receivers and Transceivers. DS90LV017A - Single High Speed Differential Driver, Package: Soic Narrow, Pin Nb=8.

eKK6511 : Keyboard Controller. In RF keyboard system, that is divided into two parts (the transmitter and the receiver). The eKK6511 micro-controller is dedicated a RF keyboard encoder for single channel RF transmitter module. The eKK6511 is scanning keyboard state, encode key data and rely RF Tx module to transmit data. Low cost ­ eliminate need external components. Phantom key detect.

HUBPORT/7 : Seven-port Usb Hub. Please contact Technical Support for more information. Model HUBPORT/7 Overview The is an active (powered) seven-port USB hub designed to provide a convenient and effective means of bringing Universal Serial Bus connectivity to your PC, server, or laptop. Unlike most other USB hubs, Hubport/7 individual power management for each port. In case of a short.

ICL3245ECR : . ±15kV ESD Protected, 1Mbps, RS-232 Transceivers with Enhanced Automatic Powerdown The Intersil ICL32XXE devices are to 5.5V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 s, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC 1000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs.

MAX3120 : Low-profile 3V, 120 a Irda Infrared Transceiver. The MAX3120 IrDA 1.2-compatible infrared transceiver is optimized for battery-powered, space-constrained applications. It consumes only 120µA while supporting data rates to 115kbps over a wide to 5.5V operating range, and a 10nA shutdown mode to further extend battery life. The MAX3120 reduces the space required for IrDA applications by requiring a minimum.

MAX3316E : 15kV ESD-Protected, 2.5V, 1 A, 460kbps, RS-232-Compatible Transceivers.

PI90LVB010 : Drivers/Receivers/tranceivers. Sotiny Single Bus LVDS Transceiver. Bus LVDS Signaling (BLVDS) Designed for Double Termination Applications Balanced Output Impedance Light Bus Loading: 5pF typical Glitch-free power up/down (Driver Disabled) Operates from a 3.3V supply High Signaling Rate Capability: >100Mbps Driver: ­ ±250mV Differential Swing into a 27 Ohm load ­ Propagation Delay of 1.5ns typ. ­ Low Voltage TTL (LVTTL).

PixiPointZSerialUR7HCPXZ-S : . PixiPoint® Serial UR7HCPXZ-S440 Advanced "Click-to-Select" No-DriftTM Pointing Stick Controller HID & SYSTEM MANAGEMENT PRODUCTS, MOUSECODER® FAMILY The PixiPoint® Z Serial UR7HCPXZ-S440 mouse encoder is a cost-effective, high-functionality IC for strain gauge "miniature joysticks" with Z-axis functionality, such as the CTS series Ideal for portable.

SN65LVDS391D : ti SN65LVDS391, Quad LVDS Transmitter. Four ('391), Eight ('389) or Sixteen ('387) Line Drivers Meet or Exceed the Requirements of ANSI EIA / TIA-644 Standard Designed for Signaling Rates to 630 Mbps With Very Low Radiation (EMI) Low-Voltage Differential Signaling With Typical Output Voltage 350 mV and a 100- Load Propagation Delay Times Less Than 2.9 ns Output Skew Is Less Than 150 ps Part-to-Part.

SN65LVDT32A : Receiver. High-speed Differential Receivers. ANSI EIA/TIA-644 Standard for Signaling Rates to 400 Mbps Operates With a Single 3.3-V Supply to 4.4-V Common-Mode Input Voltage Range Differential Input Thresholds <50 mV With mV of Hysteresis Over Entire Common-Mode Input Voltage Range Integrated 110- Line Termination Resistors Offered With the LVDT Series Propagation Delay Times 4 ns (typ) Active.

SN75C188 : Quadruple Low-power Line Drivers. Bi-MOS Technology With TTL and CMOS Compatibility Meets or Exceeds the Requirements of ANSI EIA / TIA-232-E and ITU Recommendation V.28 Very Low Quiescent Current. 95 µA Typ VCC V Current-Limited Outputs. 10 mA Typ CMOS-and TTL-Compatible Inputs On-Chip Slew Rate Limited to 30 V/µs max Flexible Supply Voltage Range Characterized at VCC 4.5 V and 15 V Functionally.

ST485EB : Low Power RS-485/RS422 Transceiver. LOW QUIESCENT CURRENT: 300µA DESIGNED FOR RS-485 INTERFACE APPLICATIONS TO 12V COMMON MODE INPUT VOLTAGE RANGE DRIVER MAINTAINS HIGH IMPEDANCE 3-STATE OR WITH THE POWER OFF 70mV TYPICAL INPUT HYSTERESIS 30ns PROPAGATION DELAYS, 5ns SKEW OPERATE FROM A SINGLE 5V SUPPLY CURRENT LIMITING AND THERMAL SHUTDOWN FOR DRIVER OVERLOAD PROTECTION ESD PROTECTION:.

TD62064AP : Package = DIP16 ;; Function = 4ch. Darlington Sink Driver ;; Rating = 50V / 1.5A.

UC1717 : Stepper Motor Drive Circuit. Half-step and Full-step Capability Bipolar Constant Current Motor Drive Built-in Fast Recovery Schottky Commutating Diodes Wide Range of Current Control 5-1000mA Wide Voltage Range 10-45V Designed for Unregulated Motor Supply Voltage Current Levels can be Selected in Steps or Varied Continuously Thermal Overload Protection The UC3717 has been designed.

ZR36730 : Vaddis Iv(tm) Integrated DVD Decoder. Single Chip DVD Decoder Solution Multiple Standard Support: CVD, SuperVCD, VideoCD, DVCD DVD-Audio Support Integrated 54 MIPS Audio DSP Embedded NTSC/PAL Encoder w/ 10-bit Video DACs DTSTM, Dolby DigitalTM, Pro LogicTM, and MPEG 5.1 Audio Decoding Virtual Surround Sound, 3D Headphones, Music Modes Enhanced Karaoke Simultaneous 2 Channel, 6 Channel,.

MAX9247 : 27-Bit, 2.5MHz-to-42MHz DC-Balanced LVDS Serializer The MAX9247 digital video parallel-to-serial converter serializes 27 bits of parallel data into a serial-data stream. Eighteen bits of video data and 9 bits of control data are encoded and multiplexed onto the serial interface, reducing the serial-data rate. The data-enable input determines when the video.

W83977EG : W83877TF plus KBC, GP I/O, Wake-Up, Power Fail Resume, Pb-free.

 
0-C     D-L     M-R     S-Z