|Category||Interface and Interconnect => RS-485|
|Description||Transformer Driver For Isolated RS-485 Interface
The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-tapped transformer primary from a 5V or 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels up to 1W.
The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-before-make action between the two switches.
|Company||Maxim Integrated Products|
|Datasheet||Download MAX253CUA+ datasheet
The is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated or RS-232 data interface. It drives a center-tapped transformer primary from 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels to 1W. The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-beforemake action between the two switches. The SD pin puts the entire device into a low-power shutdown state, disabling both the power switches and oscillator.
Power-Supply Transformer Driver for Isolated RS-485/RS-232 Data-Interface Applications Single or +3.3V Supply Low-Current Shutdown Mode: 0.4µA Pin-Selectable Frequency: 200kHz 8-Pin DIP, SO, and µMAX® Packages
PART MAX253ESA MAX253MJA TEMP RANGE to +125°C PIN-PACKAGE 8 Plastic DIP SO 8 MAX Dice* 8 Plastic DIP SO 8 CERDIP**
Isolated RS-485/RS-232 Power-Supply Transformer Driver High Noise-Immunity Communications Interface Isolated and/or High-Voltage Power Supplies Bridge Ground Differentials Medical Equipment Process Control
*Contact factory for dice specifications. **Contact factory for availability and processing to MIL-STD-883.µMAX is a registered trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Supply Voltage to +7V Control Input Voltages (SD, FS).................-0.3V to (VCC + 0.3V) Output Switch Voltage (D1, D2).............................................12V Peak Output Switch Current (D1, D2)......................................1A Average Output Switch Current (D1, D2).........................200mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 9.09mW/°C above +70°C).............727mW SO (derate 5.88mW/°C above +70°C)..........................471mW µMAX (derate 4.10mW/°C above +70°C).....................330mW CERDIP (derate 8.00mW/°C above +70°C)..................640mW Operating Temperature Ranges to +125°C Junction Temperatures MAX253C_ _/E_ _..........................................................+150°C MAX253MJA.................................................................+175°C Storage Temperature to +160°C Lead Temperature (soldering, 10sec).............................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25°C.) PARAMETER Switch On Resistance Switch Frequency Operating Supply Current (Note 1) Shutdown Supply Current (Note 2) Shutdown Input Threshold Shutdown Input Leakage Current FS Input Threshold FS Input Leakage Current Start-Up Voltage High Low FS = VCC FS = VCC or open 0V No load, 0V, FS low SD = VCC High Low CONDITIONS MIN TYP MAX UNITS kHz pA V
Note 1: Operating supply current is the current used by the MAX253 only, not including load current. Note 2: Shutdown supply current includes output switch-leakage currents.INCLUDES SWITCH LEAKAGE CURRENTS SHUTDOWN CURRENT (A) 0.8
|Related products with the same datasheet|
|Some Part number from the same manufacture Maxim Integrated Products|
|MAX253CUA+T Transformer Driver For Isolated RS-485 InterfaceThe MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives|
|DS1401 Front Panel IButton HolderiButtons® can be conveniently accessed using the DS1401 Front Panel iButton Holder and DS1402 MicroLAN cables.eThe DS1401 is connected to the computer using a DS1402BR8|
|DS1411 Serial Port IButton HolderThe DS1411 is a sophisticated RS232-to-1-Wire® adapter and iButton® holder that performs RS232-level conversion and actively generates the 1-Wire communication signals. Together|
|DS1993 1Kb/4Kb Memory IButton®The DS1992/DS1993 memory iButtons (hereafter referred to as DS199_) are rugged read/write data carriers that act as a localized database, easily accessible with minimal hardware.|
|DS9092 IButton ProbeThe DS9092 iButton® probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface|
|DS9093A IButton Key Ring MountsThe DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying.|
|DS9096P IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached|
|MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192|
|MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering|
|MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each|
|DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data|
|DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides|
MAX9542AEE+ : Quadruple, 2:1, Mux Amplifiers For Standard Definition And VGA Signals The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. The MAX9541 has integrated lowpass fi
MAX1446EHJ : 10-Bit, 60Msps, 3.0V, Low-Power ADC With Internal Reference The MAX1446 10-bit, 3V analog-to-digital converter (ADC) features a fully differential input, a pipelined 10-stage ADC architecture with digital error correction and wideband track and hold (T/H) incorporating a fully differential signal p
MAX6440UTCIVD3+T : Pmic - Battery Management Integrated Circuit (ics) Tape & Reel (TR) 1 V ~ 5.5 V; IC BATTERY MON SNGL SOT23-6 Specifications: Battery Chemistry: Alkaline, Li-Ion, NiCd, NiMH ; Function: Battery Monitor ; Package / Case: SOT-23-6 ; Packaging: Tape & Reel (TR) ; Operating Temperature: -40°C ~ 85°C ; Voltage - Supply: 1 V ~ 5.5 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
MAX9990ETP+T : Rf Misc Ic And Module Rf/if And Rfid; IC BUFFER LO 20-TQFN Specifications: Function: LO Buffers ; Secondary Attributes: 40dB Reverse Isolation ; Frequency: 700MHz ~ 1.1GHz ; RF Type: Cellular, GSM, DCS, PCS, UMTS ; Package / Case: 20-WQFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
MAX6382LT29D3+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU/RESET CIRC 2.93V 6-UDFN Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: 6-WFDFN ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.93V ; Operating Temperature: -40°C ~ 125°C ; L
MAX6719AUTRHD6+T : Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (??P) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its fac
MAX178BCNG-T : 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDIP24 Specifications: Package Type: DIP, PLASTIC, DIP-24 ; Screening Level: Commercial ; Pins: 24 ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Input Voltage: 0.0 to 5 volts
MAX6477BL24BD4-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PBGA6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, UCSP-6 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps
5962-8771002VPA : DUAL, PARALLEL, 8 BITS INPUT LOADING, 8-BIT DAC, CDIP20 Specifications: Package Type: DIP, CERAMIC, DIP-20 ; Screening Level: Military ; Pins: 20 ; Operating Temperature: -55 to 125 C (-67 to 257 F)