|Category||Interface and Interconnect => RS-485|
|Description||Transformer Driver For Isolated RS-485 Interface
The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-tapped transformer primary from a 5V or 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels up to 1W.
The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-before-make action between the two switches.
|Company||Maxim Integrated Products|
|Datasheet||Download MAX253MJA datasheet
The is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated or RS-232 data interface. It drives a center-tapped transformer primary from 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels to 1W. The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-beforemake action between the two switches. The SD pin puts the entire device into a low-power shutdown state, disabling both the power switches and oscillator.
Power-Supply Transformer Driver for Isolated RS-485/RS-232 Data-Interface Applications Single or +3.3V Supply Low-Current Shutdown Mode: 0.4µA Pin-Selectable Frequency: 200kHz 8-Pin DIP, SO, and µMAX® Packages
PART MAX253ESA MAX253MJA TEMP RANGE to +125°C PIN-PACKAGE 8 Plastic DIP SO 8 MAX Dice* 8 Plastic DIP SO 8 CERDIP**
Isolated RS-485/RS-232 Power-Supply Transformer Driver High Noise-Immunity Communications Interface Isolated and/or High-Voltage Power Supplies Bridge Ground Differentials Medical Equipment Process Control
*Contact factory for dice specifications. **Contact factory for availability and processing to MIL-STD-883.µMAX is a registered trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Supply Voltage to +7V Control Input Voltages (SD, FS).................-0.3V to (VCC + 0.3V) Output Switch Voltage (D1, D2).............................................12V Peak Output Switch Current (D1, D2)......................................1A Average Output Switch Current (D1, D2).........................200mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 9.09mW/°C above +70°C).............727mW SO (derate 5.88mW/°C above +70°C)..........................471mW µMAX (derate 4.10mW/°C above +70°C).....................330mW CERDIP (derate 8.00mW/°C above +70°C)..................640mW Operating Temperature Ranges to +125°C Junction Temperatures MAX253C_ _/E_ _..........................................................+150°C MAX253MJA.................................................................+175°C Storage Temperature to +160°C Lead Temperature (soldering, 10sec).............................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25°C.) PARAMETER Switch On Resistance Switch Frequency Operating Supply Current (Note 1) Shutdown Supply Current (Note 2) Shutdown Input Threshold Shutdown Input Leakage Current FS Input Threshold FS Input Leakage Current Start-Up Voltage High Low FS = VCC FS = VCC or open 0V No load, 0V, FS low SD = VCC High Low CONDITIONS MIN TYP MAX UNITS kHz pA V
Note 1: Operating supply current is the current used by the MAX253 only, not including load current. Note 2: Shutdown supply current includes output switch-leakage currents.INCLUDES SWITCH LEAKAGE CURRENTS SHUTDOWN CURRENT (A) 0.8
|Related products with the same datasheet|
|Some Part number from the same manufacture Maxim Integrated Products|
|MAX253C/D Transformer Driver For Isolated RS-485 InterfaceThe MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives|
|DS1401 Front Panel IButton HolderiButtons® can be conveniently accessed using the DS1401 Front Panel iButton Holder and DS1402 MicroLAN cables.eThe DS1401 is connected to the computer using a DS1402BR8|
|DS1411 Serial Port IButton HolderThe DS1411 is a sophisticated RS232-to-1-Wire® adapter and iButton® holder that performs RS232-level conversion and actively generates the 1-Wire communication signals. Together|
|DS1993 1Kb/4Kb Memory IButton®The DS1992/DS1993 memory iButtons (hereafter referred to as DS199_) are rugged read/write data carriers that act as a localized database, easily accessible with minimal hardware.|
|DS9092 IButton ProbeThe DS9092 iButton® probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface|
|DS9093A IButton Key Ring MountsThe DS9093F plastic snap-in fob offers the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to a key ring for carrying.|
|DS9096P IButton Adhesive PadsThe DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached|
|MAX3670 Low-Jitter 155MHz/622MHz Clock GeneratorThe MAX3670 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192|
|MAXQ3181 Low-Power, Active Energy, Polyphase AFEThe MAXQ3181 is a dedicated electricity measurement front-end that collects and calculates polyphase voltage, current, active power and energy, and many other metering|
|MAX9672 10-Bit, Programmable Gamma Reference Systems With MTP For TFT LCDsThe MAX9672/MAX9673/MAX9674 output 12/14/16 voltage references for gamma correction in TFT LCDs and one voltage reference for VCOM. Each|
|DS1904 RTC IButtonThe DS1904 RTC iButton® is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially by the 1-Wire® protocol, which requires only a single data|
|DS9092L IButton Probe With LEDThe DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides|
LM4040AEX3-30-T : Improved Precision Micropower Shunt Voltage Reference With Multiple Reverse Breakdown Voltages
MAX2326EVKIT : MAX2320EVKIT, MAX2321EVKIT, MAX2322EVKIT, MAX2324EVKIT, MAX2326EVKIT, MAX2327EVKIT Evaluation Kits For The MAX2320/MAX2321/MAX2322/MAX2324/MAX2326/MAX2327
MAX2652EVKIT : Evaluates: Max2651
MAX6317HUK43DY-T : Watchdog 5-Pin P Supervisory Circuits With Watchdog And Manual Reset
MAX6732UTLTD2-T : Single-/Dual-/Triple-Voltage µP Supervisory Circuits With Independent Watchdog Output The MAX6730–MAX6735 single-/dual-/triple-voltage microprocessor (µP) supervisors feature a watchdog timer and manual reset capability. The MAX6730–MAX6735 offer factory-set reset thresholds for monitoring voltages
MAX16038PLA23+T : Low-power Battery Backup Circuits in Small Ąědfn Packages
MAX6317HUK25BY-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68
DS1374C-33# : I˛C, 32-Bit Binary Counter Watchdog RTC With Trickle Charger And Reset Input/Output The DS1374 is a 32-bit binary counter designed to continuously count time in seconds. An additional counter generates a periodic alarm or serves as a watchdog timer. If disabled, this counter can be used as 3 bytes
MAX6442KALQWD3+T : Pmic - Battery Management Integrated Circuit (ics) Tape & Reel (TR) 1 V ~ 5.5 V; IC BATTERY MON DUAL SOT23-8 Specifications: Battery Chemistry: Alkaline, Li-Ion, NiCd, NiMH ; Function: Battery Monitor ; Package / Case: SOT-23-8 ; Packaging: Tape & Reel (TR) ; Operating Temperature: -40°C ~ 85°C ; Voltage - Supply: 1 V ~ 5.5 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
DS4000EC/WBGA : Clock/timing - Programmable Timer And Oscillator Integrated Circuit (ics) Temperature, Compensated Crystal Oscillator (TCXO) 4.75 V ~ 5.25 V; IC OSC TCXO 14.31818MHZ 24-BGA Specifications: Type: Temperature, Compensated Crystal Oscillator (TCXO) ; Frequency: 14.31818MHz ; Count: - ; Voltage - Supply: 4.75 V ~ 5.25 V ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant
MAX6469UT24BD1 : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: SOT23, Other, MO-178AB, SOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps