Details, datasheet, quote on part number: MX674ATQ
PartMX674ATQ
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionIndustry-Standard, Complete 12-Bit ADCs
The MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference. The maximum conversion times are 8s (MAX174), 15s (MX674A), and 25s (MX574A). Maxims BiCMOS construction reduces power dissipation 3 times (150mW) over comparable devices. The internal buried zener reference provides low-drift and low-noise performance. External component requirements are limited to only decoupling capacitors and fixed resistors. The versatile analog input structure allows for 0 to +10V or 0 to +20V unipolar or 5V or 10V bipolar input ranges with pin strapping.
CompanyMaxim Integrated Products
DatasheetDownload MX674ATQ datasheet
Cross ref.Similar parts: HI1-574ATD-2, ADS774, ADS8504, ADS8505
Quote
Find where to buy
 
  

 

Features, Applications

The MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference. The maximum conversion times are 15s (MX674A), and 25s (MX574A). Maxim's BiCMOS construction reduces power dissipation 3 times (150mW) over comparable devices. The internal buried zener reference provides low-drift and low-noise performance. External component requirements are limited to only decoupling capacitors and fixed resistors. The versatile analog input structure allows for to +20V unipolar or 10V bipolar input ranges with pin strapping. The MAX174/MX574A/MX674A use standard microprocessor interface architectures and can be interfaced 8-, 12-, and 16-bit wide buses. Three-state data outputs are controlled by CS, CE, and R/C logic inputs.

Features

S Complete ADC with Reference and Clock S 12-Bit Resolution and Linearity S No Missing Codes Over Temperature S 150mW Power Dissipation 15s (MX674A), and 25s (MX574A) Max Conversion Times S Precision Low TC Reference: 10ppm/NC S Monolithic BiCMOS Construction S 150ns Maximum Data Access Time

Applications

Digital Signal Processing High-Accuracy Process Control High-Speed Data Acquisition Electro-Mechanical Systems

For related parts and recommended products to use with this part, refer to www.maxim-ic.com/MAX174.related.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

VCC to 16.5V VEE to 7V DGND to AGND.................................................................... Q1V Control Inputs to DGND (CE, CS, A0, 12/8, R/C)......................... -0.3V to (VCC + 0.3V) Digital Output Voltage to DGND (DB11DB0, STS)...................................... -0.3V to (VL + 0.3V) Analog Inputs to AGND (REFIN, BIPOFF, 20VIN to AGND.................................................................... Q24V REFOUT.................................... Indefinite short to VCC or AGND Power Dissipation (any package) to +75NC..................1000mW Derates above +75NC...............................................10mW/NC Operating Temperature Ranges to +125NC Storage Temperature Range............................. to +160NC Lead Temperature (soldering, 10s).................................+300NC Soldering Temperature (reflow) PDIP, Wide SO..............................................................+260NC PLCC.............................................................................+245NC

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VL = +5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER ACCURACY Resolution RES = +25C Integral Nonlinearity INL TA = TMIN to TMAX MAX174AE/BE/AM/BM MAX174C Differential Nonlinearity Unipolar Offset Error (Note 1) Bipolar Offset Error (Notes 2, 3) Full-Scale Calibration Error (Note 3) TEMPERATURE COEFFICIENTS (Using Internal Reference) (Notes 3, 4) Unipolar Offset Change MAX174AC/BC MAX174CC Bipolar Offset Change MAX174BE/BM MAX174CE/CM LSB DNL 12 bits, no missing codes over temperature MAX174A MAX174B/C LSB % LSB Bits SYMBOL CONDITIONS MIN TYP MAX UNITS

(VL = +5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER SYMBOL MAX174CC MAX174AE Full-Scale Calibration Change MAX174BM MAX174CM INTERNAL REFERENCE Output Voltage Output Current (Note 5) No load V mA CONDITIONS MIN TYP MAX LSB (ppm/C UNITS

Available for external loads, in addition to REFIN and BIPOFF load

(VL + 5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER ACCURACY Resolution RES = +25C Integral Nonlinearity INL TA = TMIN to TMAX Differential Nonlinearity Unipolar Offset Error (Note 1) Bipolar Offset Error (Notes 2, 3) Full-Scale Calibration Error (Note MX574AJ/S, MX674AJ/S DNL 12 bits, no missing codes over temperature MX574AJ/S, MX674AJ/S LSB % LSB Bits SYMBOL CONDITIONS MIN TYP MAX UNITS

TEMPERATURE COEFFICIENTS (Using Internal Reference) (Notes 3, 4) Unipolar Offset Change LSB

 

Related products with the same datasheet
MX574A
MX674A
MAX174ACPI
MAX174ACPI+
MAX174ACWI
MAX174ACWI+
MAX174ACWI+T
MAX174ACWI-T
MAX174AEPI
MAX174AEPI+
MAX174AEWI
MAX174AEWI+
Some Part number from the same manufacture Maxim Integrated Products
MX674ATQ/883B Industry-Standard, Complete 12-Bit ADCsThe MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference.
MAX44251 20V, Ultra-Precision, Low-Noise Op AmpsThe MAX44251/MAX44252 are 20V, ultra-precision, low-noise, low-drift amplifiers that offer near-zero DC offset and drift through the use of patented autocorrelating
MAX16841 Controller IC For Dimmable Offline LED LampsThe MAX16841 is an LED driver for AC line (100V, 120V, 220V, and 230V AC) input lamps. It features proprietary control of the input current, which allows lamps
MAX97003 High-Efficiency, Low-Noise Audio SubsystemThe MAX97003 audio subsystem combines a mono speaker amplifier with a stereo headphone amplifier. The headphone and speaker amplifiers have independent volume
MAX6361 SOT23, Low-Power Microprocessor Supervisory Circuits With Battery BackupThe MAX6361MAX6364 supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery

MAX1575ETE : White Led 1x/1.5x Charge Pump For Main And Sub-displays The MAX1575 Charge Pump Drives up to Four White Leds in The Main Display And up to Two White Leds in The Sub-display With Regulated Constant Current For Uniform Intensity. BY Utilizing Adaptive 1x/1.5x Charge-pump Modes

MAX4613EGE : Quad, SPST Analog Switch

MAX9406ETJ+ : Displayport to Dvi/hdmi Level Shifter

DS1340_06 : I2C RTC with Trickle Charger

MAX5392MAUE+ : Dual, 256-Tap, Volatile, Low-Voltage, Linear Taper Digital Potentiometer The MAX5392 dual, 256-tap, volatile, low-voltage, linear taper digital potentiometer offers three end-to-end resistance values of 10k?, 50k?, and 100k?. Operating from a single +1.7V to +5.5V power supply, the device provides

MAX6480BL33AD3-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

MAX6467US30D3+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU/RESET CIRC 3.00V SOT143-4 Specifications: Output: Open Drain or Open Collector ; Reset: Active Low ; Package / Case: TO-253-4, TO-253AA ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 150 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 3V ; Operating Temperature: -40

ICL7663ESA : 1.3 V-16 V ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Adjustable / Variable ; Package Type: SOIC, Other, 0.150 INCH, SOIC-8 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.3 to 16 volts ; IOUT: 0.0400 amps

MAX6472TA31AD1 : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, DSO8 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, 0.80 MM HEIGHT, MO-229WEEC, TDFN-8 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

ZLP32300S2816C : OTPROM, 8 MHz, MICROCONTROLLER, PDSO20 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 8 MHz ; ROM Type: OTP ; Supply Voltage: 2 to 3.6 volts ; I/O Ports: 16 ; Package Type: SSOP, Other, SSOP-20 ; Operating Range: Commercial ; Pin Count: 20 ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z