Details, datasheet, quote on part number: MX674AUD
PartMX674AUD
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionIndustry-Standard, Complete 12-Bit ADCs
The MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference. The maximum conversion times are 8s (MAX174), 15s (MX674A), and 25s (MX574A). Maxims BiCMOS construction reduces power dissipation 3 times (150mW) over comparable devices. The internal buried zener reference provides low-drift and low-noise performance. External component requirements are limited to only decoupling capacitors and fixed resistors. The versatile analog input structure allows for 0 to +10V or 0 to +20V unipolar or 5V or 10V bipolar input ranges with pin strapping.
CompanyMaxim Integrated Products
DatasheetDownload MX674AUD datasheet
Cross ref.Similar parts: AD674BTD, ADS774, ADS8505
Quote
Find where to buy
 
  

 

Features, Applications

The MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference. The maximum conversion times are 15s (MX674A), and 25s (MX574A). Maxim's BiCMOS construction reduces power dissipation 3 times (150mW) over comparable devices. The internal buried zener reference provides low-drift and low-noise performance. External component requirements are limited to only decoupling capacitors and fixed resistors. The versatile analog input structure allows for to +20V unipolar or 10V bipolar input ranges with pin strapping. The MAX174/MX574A/MX674A use standard microprocessor interface architectures and can be interfaced 8-, 12-, and 16-bit wide buses. Three-state data outputs are controlled by CS, CE, and R/C logic inputs.

Features

S Complete ADC with Reference and Clock S 12-Bit Resolution and Linearity S No Missing Codes Over Temperature S 150mW Power Dissipation 15s (MX674A), and 25s (MX574A) Max Conversion Times S Precision Low TC Reference: 10ppm/NC S Monolithic BiCMOS Construction S 150ns Maximum Data Access Time

Applications

Digital Signal Processing High-Accuracy Process Control High-Speed Data Acquisition Electro-Mechanical Systems

For related parts and recommended products to use with this part, refer to www.maxim-ic.com/MAX174.related.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

VCC to 16.5V VEE to 7V DGND to AGND.................................................................... Q1V Control Inputs to DGND (CE, CS, A0, 12/8, R/C)......................... -0.3V to (VCC + 0.3V) Digital Output Voltage to DGND (DB11DB0, STS)...................................... -0.3V to (VL + 0.3V) Analog Inputs to AGND (REFIN, BIPOFF, 20VIN to AGND.................................................................... Q24V REFOUT.................................... Indefinite short to VCC or AGND Power Dissipation (any package) to +75NC..................1000mW Derates above +75NC...............................................10mW/NC Operating Temperature Ranges to +125NC Storage Temperature Range............................. to +160NC Lead Temperature (soldering, 10s).................................+300NC Soldering Temperature (reflow) PDIP, Wide SO..............................................................+260NC PLCC.............................................................................+245NC

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VL = +5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER ACCURACY Resolution RES = +25C Integral Nonlinearity INL TA = TMIN to TMAX MAX174AE/BE/AM/BM MAX174C Differential Nonlinearity Unipolar Offset Error (Note 1) Bipolar Offset Error (Notes 2, 3) Full-Scale Calibration Error (Note 3) TEMPERATURE COEFFICIENTS (Using Internal Reference) (Notes 3, 4) Unipolar Offset Change MAX174AC/BC MAX174CC Bipolar Offset Change MAX174BE/BM MAX174CE/CM LSB DNL 12 bits, no missing codes over temperature MAX174A MAX174B/C LSB % LSB Bits SYMBOL CONDITIONS MIN TYP MAX UNITS

(VL = +5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER SYMBOL MAX174CC MAX174AE Full-Scale Calibration Change MAX174BM MAX174CM INTERNAL REFERENCE Output Voltage Output Current (Note 5) No load V mA CONDITIONS MIN TYP MAX LSB (ppm/C UNITS

Available for external loads, in addition to REFIN and BIPOFF load

(VL + 5V, VEE or +12V, VEE = +25NC, unless otherwise noted.) PARAMETER ACCURACY Resolution RES = +25C Integral Nonlinearity INL TA = TMIN to TMAX Differential Nonlinearity Unipolar Offset Error (Note 1) Bipolar Offset Error (Notes 2, 3) Full-Scale Calibration Error (Note MX574AJ/S, MX674AJ/S DNL 12 bits, no missing codes over temperature MX574AJ/S, MX674AJ/S LSB % LSB Bits SYMBOL CONDITIONS MIN TYP MAX UNITS

TEMPERATURE COEFFICIENTS (Using Internal Reference) (Notes 3, 4) Unipolar Offset Change LSB

 

Related products with the same datasheet
MX574A
MX674A
MAX174ACPI
MAX174ACPI+
MAX174ACWI
MAX174ACWI+
MAX174ACWI+T
MAX174ACWI-T
MAX174AEPI
MAX174AEPI+
MAX174AEWI
MAX174AEWI+
Some Part number from the same manufacture Maxim Integrated Products
MX674AUQ Industry-Standard, Complete 12-Bit ADCsThe MAX174/MX574A/MX674A are complete 12-bit analog-to-digital converters (ADCs) that combine high speed, low-power consumption, and on-chip clock and voltage reference.
MAX44251 20V, Ultra-Precision, Low-Noise Op AmpsThe MAX44251/MAX44252 are 20V, ultra-precision, low-noise, low-drift amplifiers that offer near-zero DC offset and drift through the use of patented autocorrelating
MAX16841 Controller IC For Dimmable Offline LED LampsThe MAX16841 is an LED driver for AC line (100V, 120V, 220V, and 230V AC) input lamps. It features proprietary control of the input current, which allows lamps
MAX97003 High-Efficiency, Low-Noise Audio SubsystemThe MAX97003 audio subsystem combines a mono speaker amplifier with a stereo headphone amplifier. The headphone and speaker amplifiers have independent volume
MAX6361 SOT23, Low-Power Microprocessor Supervisory Circuits With Battery BackupThe MAX6361MAX6364 supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery

MAX337M : 16-Channel Dual 8 Channel, Low Leakage, CMOS Analog Multiplexers

MAX4560ESE : 15kV ESD-Protected, Low-Voltage, CMOS Analog Multiplexers Switches

MAX6697UP34 : 7-Channel Precision Temperature Monitor The MAX6697 precision multichannel temperature sensor monitors its own temperature and the temperatures of up to six external diode-connected transistors. All temperature channels have programmable alert thresholds. Channels 1, 4, 5, and 6 also have programma

MAX6483BL15BD1-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

MAX98306ETD+ : Stereo 3.7W Class D Amplifier The MAX98306 stereo 3.7W Class D amplifier provides Class AB audio performance with Class D efficiency. This device offers five selectable gain settings (6dB, 9dB, 12dB, 15dB, and 18dB) set by a single gain-select input (GAIN). Active emissions limiting, edge-rate,

MAX5981BETE+ : IEEE 802.3af/at-Compliant, Powered Device Interface Controllers With Integrated Power MOSFET The MAX5981 provides a complete interface for a powered device (PD) to comply with the IEEE 802.3af/at standard in a power-over-ethernet (PoE) system. The MAX5981 provides the PD with a detection signature

DS1100LU-30 : 3-Volt 5-Tap Economy Timing Element (Delay Line) The DS1100L is a 3.3V version of the DS1100. It is characterized for operation over the range 3.0V to 3.6V. The DS1100L series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices are offered in surface-mount pa

MAX6440UTBJYD3+T : Pmic - Battery Management Integrated Circuit (ics) Tape & Reel (TR) 1 V ~ 5.5 V; IC BATTERY MON SNGL SOT23-6 Specifications: Battery Chemistry: Alkaline, Li-Ion, NiCd, NiMH ; Function: Battery Monitor ; Package / Case: SOT-23-6 ; Packaging: Tape & Reel (TR) ; Operating Temperature: -40C ~ 85C ; Voltage - Supply: 1 V ~ 5.5 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

DS1267S-100/T&R : Data Acquisition - Digital Potentiometer Integrated Circuit (ics) Volatile Tape & Reel (TR) 4.5 V ~ 5.5 V; IC POT DUAL DIGITAL 100K 16-SOIC Specifications: Number of Circuits: 2 ; Resistance (Ohms): 100K ; Interface: 3-Wire Serial ; Taps: 256 ; Package / Case: 16-SOIC (0.295", 7.50mm Width) ; Packaging: Tape & Reel (TR) ; Voltage - Supply: 4.5 V ~ 5.5 V ; Memory Type: Volatile ; Temperature Coefficient: 750 ppm/C Typical ; Operatin

MAX6720AUTWGD5+T : Dual/Triple, Ultra-Low-Voltage, SOT23 P Supervisory Circuits The MAX6715AMAX6729A/MAX6797A are ultra-low-voltage microprocessor (??P) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its fac

 
0-C     D-L     M-R     S-Z