|Category||Memory => ROM => EEPROM => Serial => I2C->4K to 8K|
|Title||I2C->4K to 8K|
|Description||The 24AA08 is an 8K Bit Electrically Erasable Prom Memory Organized as Four Blocks of 256 X 8-bit Memory With an I2C Compatible 2-wire Serial Interface Bus|
|Company||Microchip Technology, Inc.|
|Datasheet||Download 24AA08 datasheet
Part Number 24AA08 24LC08B Note 1: VCC Range 1.8-5.5 2.5-5.5 Max Clock Frequency kHz(1) 400 kHz Temp Ranges I, EDescription
The Microchip Technology Inc. a 8 Kbit Electrically Erasable PROM. The device is organized as four blocks x 8-bit memory with a 2-wire serial interface. Low voltage design permits operation down to 1.8V, with standby and active currents of only 1 µA and 1 mA, respectively. The 24XX08 also has a page write capability for to 16 bytes of data. The 24XX08 is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP and MSOP packages and is also available in the 5-lead SOT-23 package.Features
Single supply with operation down to 1.8V Low power CMOS technology 1 mA active current typical 1 µA standby current typical (I-temp) Organized as 4 blocks of 256 bytes 8) 2-wire serial interface bus, I2CTM compatible Schmitt Trigger inputs for noise suppression Output slope control to eliminate ground bounce 100 kHz (<2.5V) and 400 kHz (2.5V) compatibility Self-timed write cycle (including auto-erase) Page write buffer for to 16 bytes 2 ms typical write cycle time for page write Hardware write protect for entire memory Can be operated as a serial ROM Factory programming (QTP) available ESD protection 4,000V 1,000,000 erase/write cycles Data retention > 200 years 8-lead PDIP, SOIC, TSSOP and MSOP packages 5-lead SOT-23 package Standard and Pb-free finishes available Available for extended temperature ranges: - Industrial (I): +85°C - Automotive (E): to +125°C*24XX08 is used in this document as a generic part number for the 24AA08/24LC08B devices.
VCC.............................................................................................................................................................................6.5V All inputs and outputs w.r.t. VSS......................................................................................................... -0.3V to VCC +1.0V Storage to +150°C Ambient temperature with power to +125°C ESD protection on all pins...................................................................................................................................................... 4 kV NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.VCC to +5.5V Industrial (I): TAMB to +85°C Automotive (E): TAMB to +125°C Min
DC CHARACTERISTICS Param. Symbol No. D10 D11 VIH VIL VHYS VOL ILI ILO CIN, COUT ICC read ICCS Standby current
Characteristic WP, SCL and SDA pins High level input voltage Low level input voltage Hysteresis of Schmitt trigger inputs Low level output voltage Input leakage current Output leakage current Pin capacitance (all inputs/outputs)
IOL = 3.0 mA, VCC = 2.5V VIN =.1V to VCC VOUT =.1V to VCC = 5.0V (Note) TAMB = 25°C, FCLK = 1 MHz VCC = 5.5V, SCL = 400 kHz Industrial Automotive SDA = SCL = VCC WP = VSS
VCC to +5.5V Industrial (I): TAMB to +85°C Automotive (E): TAMB to +125°C Min Typ Max Units kHz ns Conditions 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V (Note 1) 1.8V VCC 2.5V (24AA08) (Note 1) (Note 1) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC 2.5V (24AA08) (Note 2) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC (24AA08) 2.5V VCC 5.5V 1.8V VCC 2.5V (24AA08)
Characteristic Clock frequency Clock high time Clock low time SDA and SCL rise time (Note 1) SDA and SCL fall timeTHD:STA START condition hold time TSU:STA START condition setup time
THD:DAT Data input hold time TSU:DAT Data input setup time TSU:STO STOP condition setup time TAA TBUF Output valid from clock (Note 2) Bus free time: Time the bus must be free before a new transmission can start Output fall time from VIH minimum to VIL maximum Input filter spike suppression (SDA and SCL pins) Write cycle time (byte or page) Endurance
Not 100% tested. CB = total capacitance of one bus line in pF. As a transmitter, the device must provide an internal minimum delay time to bridge the undefined region (minimum 300 ns) of the falling edge of SCL to avoid unintended generation of START or STOP conditions. The combined TSP and VHYS specifications are due to new Schmitt Trigger inputs which provide improved noise spike suppression. This eliminates the need for a TI specification for standard operation. This parameter is not tested but ensured by characterization. For endurance estimates in a specific application, please consult the Total EnduranceTM Model which can be obtained on Microchip's web site: www.microchip.com.
|Related products with the same datasheet|
|Some Part number from the same manufacture Microchip Technology, Inc.|
|24AA08/SN 4k/8k 1.8v I2c Serial EePROMs|
|24AA128 The 24AA128 is a 16K X 8 (128K-bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA128EP 128k i 2 C CMOS Serial EePROM|
|24AA128T The 24AA128 is a 16K X 8 (128K-bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA16 The 24AA16 is a 16K Bit Electrically Erasable Prom Memory Organized as Eight Blocks of 256 X 8-bit Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA160-IP 8k/16k 1.8v Spi Bus Serial EePROM|
|24AA164 Note:this Product Has Become 'Obsolete' And is no Longer Offered as a Viable Device For Design|
|24AA16IP 16k 1.8v i 2 C o Serial EePROM|
|24AA256 The 24AA256 is a 32K X 8 (256K-bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA256ESM 256k i 2 C CMOS Serial EePROM|
|24AA256T The 24AA256 is a 32K X 8 (256K-bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA32 32k 1.8v i 2 C o Smart Serial EePROM|
|24AA32A The 24AA32A is a 4K X 8 (32K Bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA32A-P 32k 1.8v i 2 C o Smart Serial EePROM|
|24AA512 The 24AA512 is a 64K X 8 (512K-bit) Serial Electrically Erasable Prom Memory With an I2C™ Compatible 2-wire Serial Interface Bas|
|24AA515 The 24AA515 is a 64K X 8 (512K-bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA52 The 24AA52 is a 2K Bit Serial Electrically Erasable Prom For Plug-and-play Identification Applications Allowing Easy Customization And Automatic Configuration/id|
|24AA64 The 24LC64 is an 8K X 8 (64K Bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
|24AA64-EP 64k i 2 C CMOS Serial EePROM|
|24AA640-EP 64k Spi Bus Serial EePROM|
|24AA64T The 24LC64 is an 8K X 8 (64K Bit) Serial Electrically Erasable Prom Memory With an I2C Compatible 2-wire Serial Interface Bus|
PIC16C65A-10E/P : 8-bit CMOS Microcontrollers
PIC16C73A-10I/TQ : 8-bit CMOS Microcontrollers With A/D Converter
PIC16LF84T-10I/SO : 18-pin Flash/eePROM 8-bit Microcontrollers
25AA640T-E/P : 64K SPI Bus Serial Eeprom
93AA76AE/PG : 8k/16k 1.8V Microwire Serial Eeprom
MCP1827T-2502EET : 1.5a, Low Voltage, Low Quiescent Current LDO Regulator
93C56AXTI/STG : 2K Microwire Compatible Serial Eeprom
24C00T-SN : 128 Bit I2C Bus Serial Eeprom
MCP1727-1202E/SN : 1.5a, Low Voltage, Low Quiescent Current LDO Regulator
72V851 : 8K X 9 Dualsync Fifo, 3.3V. 3.3 VOLT DUAL CMOS SyncFIFOTM DUAL X 9, DUAL X 9, DUAL X 9, DUAL X 9, DUAL 9 , DUAL X 9 The IDT72V801 is equivalent to two x 9 FIFOs The IDT72V811 is equivalent to two x 9 FIFOs The IDT72V821 is equivalent to two x 9 FIFOs The IDT72V831 is equivalent to two x 9 FIFOs The IDT72V841 is equivalent to two x 9 FIFOs The IDT72V851 is equivalent to two x 9 FIFOs.
AT24RF08 : 1kx8 Dual Access EePROM With Rfid And Serial Interfaces. Dual-port Nonvolatile Memory - RFID and Serial Interfaces Two-wire Serial Interface: Compatible with a Standard AT24C08 Serial EEPROM Programmable Access Protection to Limit Reads or Writes from Either Port Lock/Unlock Function, Coil Connection Detection RFID Interface: 125 kHz Carrier Frequency for Long Range Access 2-Wire Connection to External.
CAT25C65 : Spi Bus Serial EePROM (Motorola Compatible), 64Kb. s 10 MHz SPI compatible to 6.0 volt operation s Hardware and software protection s Zero standby current s Low power CMOS technology s SPI modes &1,1) s Commercial, industrial, automotive and extended s 1,000,000 program/erase cycles s 100 year data tetention s Self-timed write cycle s 8-pin DIP/SOIC and 14-pin TSSOP s 64-byte page write buffer s Block.
CY7C1472V33-250AC : NoBL. Nobl Synchronous SRAM. Zero Bus LatencyTM, no dead cycles between Write and Read cycles Fast clock speed: 250, 200, and 167 MHz Fast access time: 2.4, 3.0 and 3.4 ns Internally synchronized registered outputs eliminate the need to control OE Single 3.3V 5% and +5% power supply VDD Separate VDDQ for or 2.5V Single WE (Read/Write) control pin Positive clock-edge triggered,.
CY7C4205V-15ASC : 3.3V SYNC Fifo. 3.3V operation for low power consumption and easy integration into low-voltage systems High-speed, low-power, first-in first-out (FIFO) memories (CY7C4245V) 0.65µ CMOS High-speed 67-MHz operation (15-ns read/write cycle times) Low power ICC = 30 mA 5V tolerant inputs (VIH MAX = 5V) Fully asynchronous and simultaneous read and write operation Empty,.
HYM72V64C736K8M : 64Mx72 Bits PC133 Sdram Registered Dimm With Pll, Based on 64Mx4 Sdram With Lvttl, 4 Banks & 8K Refresh.
KM44C4100CK : = KM44C4100CK 4M X 4Bit CMOS Dynamic RAM With Fast Page Mode ;; Organization = 4Mx4 ;; Mode = Fast Page ;; Voltage(V) = 5 ;; Refresh = 2K/32ms ;; Speed(ns) = 50,60 ;; Package = 26SOJ,24SOJ,26TSOP2,24TSOP2 ;; Power = Normal,low ;; Production Status = Eol ;; Comments = -.
M377S3253CT3 : Registered DIMM. = M377S3253CT3 (Intel 1.2 Ver Base) 32Mx72 Sdram Dimm With PLL & Register Based on 32Mx8, 4Banks 8K Ref., 3.3V Synchronous DRAMs With SPD ;; Density(MB) = 256 ;; Organization = 32Mx72 ;; Bank/ Interface = 4B/LVTTL ;; Refresh = 8K/64ms ;; Speed = 1H,1L ;; #of Pin = 168 ;; Power = C ;; Component Composition = (32Mx8)x9+EEPROM ;; Production.
M5M467400 : Asynchronous->3.3V FPM. Lsis: Fast Page Mode 67108864- Dynamic RAM.
M5M5V216ATP-55HI : . Regarding the change of names mentioned in the document, such as Mitsubishi Electric and Mitsubishi XX, to Renesas Technology Corp. The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory.
MBM29F400TC : 4M. 4m ( 512k X 8/256k X 16 ) Bit. Single 5.0 V read, write, and erase Minimizes system level power requirements Compatible with JEDEC-standard commands Uses same software commands as E2PROMs Compatible with JEDEC-standard world-wide pinouts 48-pin TSOP (Package suffix: PFTN Normal Bend Type, PFTR Reversed Bend Type) 44-pin SOP (Package suffix: PF) Minimum 100,000 write/erase cycles.
SST39VF016 : 8 Mbit / 16 Mbit ( x8 ) Multi-purpose Flash. Organized 2M x8 Single Voltage Read and Write Operations 3.0-3.6V for 2.7-3.6V for SST39VF080/016 Superior Reliability Endurance: 100,000 Cycles (typical) Greater than 100 years Data Retention Low Power Consumption: Active Current: 15 mA (typical) Standby Current: 4 µA (typical) Auto Low Power Mode: 4 µA (typical) Sector-Erase Capability.
TC55257 : 256k CMOS SRAM: 32kx8.
TMS417800A-60DZ : ti TMS417800A, 2 097 152-WORD BY 8-BIT Page-mode DRAM. This data sheet is applicable to all TMS417800As symbolized by Revision "E" and subsequent revisions as described in the device symbolization section. Organization. Single 5-V Power Supply 10% Tolerance) 2 048-Cycle Refresh 32 ms Performance Ranges: ACCESS READ OR TIME EDO tRAC tCAC tAA CYCLE MAX MIN 30 ns Enhanced Page-Mode Operation With CAS-Before-RAS.
W27E512P : 64kx8, 512k, 5v, 70, 120, Chip Erase, :dip(28)/ P:plcc (32). The is a high speed, low power Electrically Erasable and Programmable Read Only Memory organized × 8 bits that operates on a single 5 volt power supply. The W27E512 provides an electrical chip erase function. 45/55/70/90/120/150 nS (max.) Read operating current: 30 mA (max.) Erase/Programming operating current 30 mA (max.) Standby current: 1 mA (max.).
AS8E128K32P-12/IT : 128K X 32 EEPROM 5V, 120 ns, CPGA66. s: Density: 4194 kbits ; Number of Words: 128 k ; Bits per Word: 32 bits ; Bus Type: Parallel ; Production Status: Full Production ; Access Time: 120 ns ; Logic Family: CMOS ; Supply Voltage: 5V ; Package Type: 1.075 X 1.075 INCH, CERAMIC, PGA-66 ; Pins: 66 ; Operating Range: Industrial ; Operating Temperature: -40 to 85 C (-40.
MT5C1008EC-25P/883C : 128K X 8 STANDARD SRAM, 25 ns, CDSO32. s: Memory Category: SRAM Chip ; Density: 1049 kbits ; Number of Words: 128 k ; Bits per Word: 8 bits ; Package Type: CERAMIC, LCC-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F).
SMJ626162-12HKD : 1M X 16 SYNCHRONOUS DRAM, 8 ns, CDFP50. s: Memory Category: DRAM Chip ; Density: 16777 kbits ; Number of Words: 1000 k ; Bits per Word: 16 bits ; Package Type: 0.650 INCH, CERAMIC, DFP-50 ; Pins: 50 ; Supply Voltage: 3.3V ; Access Time: 8 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F).