|Category||Communication => Transeivers|
|Description||Tri-state Rs-422 Dual Differential Line Drivers And Receiver PaIR (discontinued)|
|Company||National Semiconductor Corporation|
|Datasheet||Download DS8922A datasheet
|Cross ref.||Similar parts: MC34050D, MC34050DR2, MC34050P, MC34051D, MC34051DR2, MC34051P, DS8922AJ, DS8922AN, DS8922J, DS8922N|
|DS8922/DS8922A/DS8923A TRI-STATE RS-422 Dual Differential Line Driver and Receiver Pairs
DS8922/DS8922A/DS8923A TRI-STATE ® RS-422 Dual Differential Line Driver and Receiver Pairs
The DS8922/22A and DS8923A are Dual Differential Line Driver and Receiver pairs. These devices are designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, the devices meet the requirements of the EIA Standard RS-422. These devices offer an input sensitivity 200 mV over ± 7V common mode operating range. Hysteresis is incorporated (typically 70 mV) to improve noise margin for slowly changing input waveforms. An input fail-safe circuit is provided such that if the receiver inputs are open the output assumes the logical one state. The DS8922A and DS8923A drivers are designed to provide unipolar differential drive to twisted pair or parallel wire transmission lines. Complementary outputs are logically ANDed and provide an output skew 0.5 ns (typ.) with propagation delays of 12 ns. Both devices feature TRI-STATE outputs. The DS8922/22A have independent control functions common to a driver and receiver pair. The DS8923A has separate driver and receiver control functions. Power up/down circuitry is featured which will TRI-STATE the outputs and prevent erroneous glitches on the transmission lines during system power up or power down operation. The DS8922/22A and DS8923A are designed to be compatible with TTL and CMOS.Features
12 ns typical propagation delay Output skew 0.5 ns typical Meets the requirements of EIA Standard RS-422 Complementary Driver Outputs High differential or common-mode input voltage ranges ± 0.2V receiver sensitivity over the input voltage range Receiver input fail-safe circuitry Receiver input hysteresis 70 mV typical Glitch free power up/down TRI-STATE outputsTRI-STATE is a registered trademark of National Semiconductor Corp.
EN2 RO1 ACTIVE HI-Z ACTIVE HI-Z RO2 ACTIVE HI-Z DO1 ACTIVE HI-Z ACTIVE HI-Z DO2 ACTIVE HI-Z
DEN REN RO1 ACTIVE HI-Z RO2 ACTIVE HI-Z DO1 ACTIVE HI-Z ACTIVE HI-Z DO2 ACTIVE HI-Z ACTIVE HI-Z
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage 7V Drive Input Voltage to +7V Output Voltage 5.5V Receiver Output Sink Current ± 10V Receiver Input Voltage ± 12V Differential Input Voltage Maximum Package Power Dissipation +25°C M Package 1300 mW
N Package 1450 mW Derate M Package 10.4 mW/°C above +25°C Derate N Package 11.6 mW/°C above +25°C Storage Temperature Range to +165°C Lead Temp. (Soldering, 4 seconds) 260°C
Symbol RECEIVER VTH VHYST RIN IIN VOH VOL ISC DRIVER VOH VOL IOFF |VT|| | VT |VOS VOS | ISC IOZ TRI-STATE Leakage ICC VCC = MAX ACTIVE TRI-STATE DRIVER and ENABLE INPUTS VIH VIL IIL IIH II VCL
Conditions -7V VCM +7V -7V VCM -7V, +7V (Other Input = GND) VIN = 10V VIN CC = MIN, IOH CC = MAX, IOL 8 mA
|Some Part number from the same manufacture National Semiconductor Corporation|
|DS8922AM DS8922 - Tri-state RS-422 Dual Differential Line Drivers And Receiver Pair, Package: Soic Narrow, Pin Nb=16|
|DS8923A DS8922 - Tri-state RS-422 Dual Differential Line Drivers And Receiver Pair, Package: Soic Narrow, Pin Nb=16|
|DS8925 Local Talk Dual Driver/triple Receiver|
|DS8935 Localtalk Dual Driver/triple Receiver (obsolete)|
|DS8963 MOS-to-led 8-digit Driver|
|DS8973 9-digit Led Driver (discontinued)|
|DS89C21 DS89C21 - Differential CMOS Line Driver And Receiver Pair, Package: Soic Narrow, Pin Nb=8|
|DS89C21TM DS89C21 - Differential CMOS Line Driver And Receiver Pair, Package: Soic Narrow, Pin Nb=8|
|DS89C386 DS89C386 - Twelve Channel CMOS Differential Line Receiver, Package: SSOP-EIAJ, Pin Nb=48|
|DS89C387 DS89C387 - Twelve Channel CMOS Differential Line Driver, Package: SSOP-EIAJ, Pin Nb=48|
|DS90C031 DS90C031 - LVDS Quad CMOS Differential Line Driver, Package: Lcc, Pin Nb=20|
|DS90C031B DS90C031B - LVDS Quad CMOS Differential Line Driver, Package: Soic Narrow, Pin Nb=16|
|DS90C031E-MIL DS90C031 - LVDS Quad CMOS Differential Line Driver, Package: Lcc, Pin Nb=20|
100343QCX : Military/Aerospace->ECL 100343 - Low Power 8-Bit Latch, Package: Cerquad, Pin Nb=24
ADC14071 : ADC14071 - 14-Bit, 7 Msps, 380 MW A/D Converter, Package: Lqfp, Pin Nb=48
LF255H : Series Monolithic JFET Input Operational Amplifiers
LM136A : 5 V Reference Diode
LM83CIMQAX : Triple-diode Input And Local Digital Temperature Sensor With Two-wire Interface
LMC7111BIM5X : Rail to Rail Input LMC7111 - Tiny CMOS Operational Amplifier With Rail-to-rail Input And Output, Package: Mdip, Pin Nb=8
PC97317-IBW/VUL : Superi/o Plug And Play Compatible Chip With Acpi-compliant Controller/extender
COP8SGE844M8 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart
VJ1206A390 : N-channel FET Synchronous Buck Regulator Controller for Low Output Voltages
COP8SGR728L9 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart
HFBR1452C : Low Cost, Miniature Fiber Optic Components With St, Sma, SC And FC Ports.
IDT7M924 : ATM Physical Interface. 155mbps Atm Network Interface Card (nic) in Pci Card Edge Form Factor.
LC99063-LF2 : Databus ICs. CCD Digital Signal Processing ic. s Parameter Supply voltage I/O voltage Input voltage Allowable power dissipation Operating temperature Storage temperature Solder resistance (Hand soldering) Solder resistance (Reflow) I/O current Ii, Io Symbol VDD max VI2 Pd max Topr Tstg 10s * For pin type 1 For pin type 2 Conditions Ratings 0.3 to VDD 55 to Unit °C mA The pin types above refer.
LST0623-SC-A : 622 Mbit/s SMF SC Connectorized Laser Transmitter Module. Single Mode SC Connectorized Laser Transmitter Module Technical Data 1300 nm Single Mode Industry Standard SC Connector High Reliability Connectorized for Ease of Use Convenient Variety of 4 Pin Configurations Hermetic Construction Wide Operating Temperature to +85°C Modulation Capability to 622 Mb/s SONET SR/IR to OC12 SDH STMl and 4 Compliant Laser.
LXT16865 : Broadband & Access. Networking & Communications - Optical Products & Technologies - Optical Components - Intel LXT16865 Transimpedance Amplifier (TIA).
M57788HR : RF Power Module For 450-470MHz, 13.5V, 47W FM Mobile Radio. PIN: 1 Pin : RF INPUT 1st. DC SUPPLY 2nd. DC SUPPLY 3nd. DC SUPPLY : RF OUTPUT 6 GND: FIN ABSOLUTE MAXIMUM RATINGS (Tc=25°C unless otherwise noted) Symbol VCC ICC Pin (max) PO (max) TC (OP) Tstg Parameter Supply voltage Total current Input power Output power Operation case temperature Storage temperature Conditions ZG=ZL=50, VCC113.5V Ratings to +110.
MAX3748EVKIT : MAX3748EVKIT Evaluation Kit For The MAX3748. The MAX3748 evaluation kit (EV kit) simplifies evaluation of the MAX3748 limiting amplifier. The EV kit allows for quick threshold level selections, provides a RSSI output signal (when used with the MAX3744) and includes a calibration circuit. The MAX3748 EV kit is fully assembled and tested. Fully Assembled and Tested Test Point for Easy Monitoring.
MAX388C/D : High-voltage, Fault-protected Analog Multiplexers.
MSM9841 : Record/Play. Record/playback ic With Built-in Fifo Data Sheet. FEDL9841-04 This version: MSM9841 Jul. 2000 Previous version: Jun. 1999 This document contains minimum s. For full s, please contact your nearest Oki office or representative. The is a mono/stereo record and playback LSI with a built-in 1K bit FIFO for easy interface with external systems or non-semiconductor memory. It utilizes multiple record and playback.
PM5357 : 622 Mbit/s Atm And Packet Over Sonet Physical Layer Device. microprocessor interface for device control and register access Provides standard IEEE 1149.1 JTAG test port for boundary scan Performs byte stuffing and destuffing Checks for minimum and maximum packet lengths Checks for packet abort sequence Performs X43+1 payload scrambling Provides a SATURN POS-PHY Level 2 and 8-bit 100MHz POS-PHY Level 3 system.
SD14950-3 : RF & Microwave Transistors 900-960 MHZ Class C Base Stations.
SN6A060 : LCD Controller With Voice/dual Tone Melody. is a single chip voice/dual tone melody synthesizer IC with 4*32 LCD direct drive capability which contains two 4-bit I/O ports, one 4-bit output ports and a tiny controller. By programming through the tiny controller, user's applications including LCD display, section combination, trigger modes, output status, voice/melody playing and other logic functions.
STM51004x/STM51005x : Laser Transmitters For Fiber Optic Applications (1300 And 1550 Nm). Designed for applications in fiber optic networks Laser Diode with Multi-Quantum Well structure Suitable for bit rates to 1 Gbit/s Ternary Photodiode at rear mirror for monitoring and control of radiant power Hermetically sealed subcomponents, similar 46 SM pigtail with optional connector Available Pinnings with and without Flange Type STM51004x STM51005x.
TDA5636 : TDA5636; TDA5637; 9 V VHF, Hyperband And UHF Mixers- Oscillators For TV And VCR 3-band Tuners.
TS5070 : Line Card. Programmable Codec/filter Combo 2ND Generation. COMPLETE CODEC AND FILTER SYSTEM INCLUDING : TRANSMIT AND RECEIVE PCM CHANNEL FILTERS µ-LAW OR A-LAW COMPANDING CODER AND DECODER RECEIVE POWER AMPLIFIER DRIVES 4.096 MHz SERIAL PCM DATA (max) PROGRAMMABLE FUNCTIONS : TRANSMIT GAIN 25.4 dB RANGE, 0.1 dB STEPS RECEIVE GAIN 25.4 dB RANGE, 0.1 dB STEPS HYBRID BALANCE CANCELLATION FILTER TIME-SLOT.
XTNETA1570MFP : Broadband/Networking Components. ti TNETA1570, Atm Hypersar With Pci Host Interface & Utopia Interface.
AT76C902 : Wireless VoIP Processor Implementing the 802.11a/g Standards. Controlling the Phone Functions with Internal 8K Instruction Cache and 8K Data Cache Used for Fast Execution of the Communications Protocols and RTOS with Reduced Power Consumption ARM7TDMITM Core (ARM7) for Implementing the 802.11 MAC Layer Configurable Memory Banks to Assign Memory where Best Needed in Chip 16-bit Dual-MAC DSP for Implementing the G.723.1,.