Details, datasheet, quote on part number: LP3942YQ
DescriptionThe Dual RGB LED Controller with 1.5x/2x Charge Pump and SPI Interface
CompanyNational Semiconductor Corporation
DatasheetDownload LP3942YQ datasheet


Features, Applications
LP3942 The Dual RGB LED Controller with 1.5x/2x Charge Pump and SPI Interface

The is an integrated stand-alone RGB LED controller with a high efficiency and low noise programmable 1.5x and 2x charge pump. The RGB LEDs are controlled through the low voltage SPI interface. RGB programmability allows unique color and brightness control with both RGB outputs. The color control has preselected color settings for color blending. The LED current control is done using constant current sinks that can be also used as switches. The nonoverlapping RGB output PWM control minimizes the input noise. See also: LP3931, LP3933 and LP3936 Lighting Management Units


n Pre-regulated 1.5x and 2x charge pump with regulated output (4.5V and n 2 separately controlled PWM RGB LED drivers with programmable color and brightness n Overlapping and non-overlapping RGB mode n Wide input voltage range 3V­5.0V n Output current mA n Low voltage SPI interface n Programmable low current Standby mode n Tiny LLP24 package (5mm*4mm*0.8mm)


Note: The actual physical placement of the package marking will vary from part to part. The package marking "XY" designates the date code. "UZ" and "TT" are NSC internal codes for die manufacturing and assembly traceability. Both will vary considerably.

Order Number LP3942YQ LP3942YQX Package Marking LP3942YQ LP3942YQX Supplied As 1000 units, Tape-and-Reel 2500 units, Tape-and-Reel

Pin Name SS SI SCK G2 R2 POUT C1P VIN C1N C2P VDD GND2 IBIAS IG IB NRST Power Ground Input Logic Input Ground Power Type Logic Input Logic Input Logic Input Output Ground Output SPI Slave Select SPI Serial Data SPI Clock Open Drain, Red LED (1) Open Drain, Green LED (1) Open Drain, Blue LED (1) Ground 3 Open Drain, Blue LED (2) Open Drain, Green LED (2) Open Drain, Red LED (2) Charge Pump Output Flying capacitor C1 connection Input voltage from battery Flying capacitor C2 connection Ground 1 Flying capacitor C1 connection Flying capacitor C2 connection LDO/Supply voltage input Ground 2 Bias resistor connection Red LED current set resistor Green LED current set resistor Blue LED current set resistor Low active reset input pin. (Internal pull down 1 M) Description


Related products with the same datasheet
Some Part number from the same manufacture National Semiconductor Corporation
LP3942YQX The Dual RGB LED Controller with 1.5x/2x Charge Pump and SPI Interface
LH6733MQ Single Supply, 1.0 GHz, Triple Operational Amplifier
ADC128S022EVAL 8-channel, 500 kSPS to 1 Msps, 12-bit A/D Converter
74F648FCQB Octal Transceiver/register with Tri-state Outputs
MM5035N Octal 80-bit Static Shift Register
LM2678SD-12 Simple Switcher¢ç High Efficiency 5A Step-down Voltage Regulator
DM7160W Magnitude Comparator
74FTC534PCQR Octal D Flip-flop with Tri-state Outputs
DS2002CJ HIGH Current / Voltage Darlington Drivers
LMH6601Q 250 MHz, 2.4V CMOS Operational Amplifier with Shutdown
LMH0056SQ Hd/sd SDI Reclocker with 4:1 Input Multiplexer
54F32DMX Quad 2-input OR Gate
LMP7701_06 Precision, CMOS Input, Rrio, Wide Supply Range Amplifiers
54LS51DMQB DUAL 2-wide 2-input, 2-wide 3-input And-or-invert Gates
LM4995_07 1.3W Audio Power Amplifier
LM8300ILQ9 Four Wire Resistive Touchscreen Controller with Brownout
CLC408AJE Comlinear Clc408 High-speed, Low-power Line Driver
54LS377 Octal D Flip-flop WITH Common Enable AND Clock
LM317AHP+ 3-terminal Adjustable Regulator
74F02FMQB Quad 2-input NOR Gate
DP8510 Bitblt Processing UNIT

5962R9863702VHA : LM108A - Operational Amplifiers, Package: TO-5, Pin Nb=8

74FCT374APMQR : Octal D Flip-flop With Tri-state Outputs

CLC114A8B : Buffers CLC115 - Quad, Closed-loop Monolithic Buffer, Package: Cerdip, Pin Nb=14

LF444CM : LF444 - Quad Low Power JFET Input Operational Amplifier, Package: Sidebraze, Pin Nb=14

LP2988AIMM-3.3 : Positive Voltage->Fixed LP2987 - Micropower, 200 ma Ultra Low-dropout Voltage Regulator With Programmable Power-on Reset Delay, Package: Llp, Pin Nb=8

LP3999ITL-1.8 : Low Noise 150mA Voltage Regulator for RF/Analog Applications The LP3999 regulator is designed to meet the requirements of portable wireless battery-powered applications and will provide an accurate output voltage with low noise and low quiescent current. Ideally suited for powering RF/Analog device

LME49740 : Quad High Performance, High Fidelity Audio Operational Amplifier The LME49740 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge process technolog

LM20123 : 3A, 1.5MHz PowerWise Synchronous Buck Regulator The LM20123 is a full featured 1.5 MHz synchronous buck regulator capable of delivering up to 3A of continuous output current. The current mode control loop can be compensated to be stable with virtually any type of output capacitor. For most cases, c

VJ0805A1R8DXQAP5G : Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization

COP8SGG740D7 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

COP8SGC828M3 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

DS80PCI102SQX/NOPB : Ultra Low Power 8 Gbps 1-Lane Repeater With Input Equalization And Output De-Emphasis The DS80PCI102 is a low power, 1 lane repeater with 4-stage input equalization, and output de-emphasis driver to enhance the reach of PCI express serial links in board-to-board or cable interconnects. Ideal for x1

Same catergory

MCFPD9-002 : Lamp T2.7/8 Mbc/mcc 24v 2.0w.

PCA1485U/10/F2 : PCA148x Series; 32 KHZ Watch Circuits With Adaptive Motor Pulse. PCA148x series 32 kHz watch circuits with adaptive motor pulse Product Supersedes data of 1998 Mar 26 File under Integrated Circuits, IC16 1998 Apr 21 32 kHz watch circuits with adaptive motor pulse 32 kHz oscillator, amplitude regulated with excellent frequency stability High immunity of the oscillator to leakage currents Time calibration electrically.

SAB-C515C-8RM : 8-bit CMOS Microcontroller. Subjects (changes since last revision) SSC transfer rate at 10 MHz = 2.5 MHz Figure reference corrected Power saving modes : of hardware power down mode added Icc has been extended tSCLK for Master Mode corrected Edition 1997-07-01 Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1997. All Rights.

SN74ABT5402DW : Non-Inverting Buffers and Drivers. ti SN74ABT5402, 12-Bit Line/memory Drivers With 3-State Outputs.

TLV0831C : 3-v 8-bit Analog-to-digital Converters With Serial Control. 8-Bit Resolution 3.6 V VCC Easy Microprocessor Interface or Standalone Operation Operates Ratiometrically or With VCC Reference Single Channel or Multiplexed Twin Channels With Single-Ended or Differential Input Options Input Range V to VCC With VCC Reference Inputs and Outputs Are Compatible With TTL and MOS Conversion Time µs at f(CLK) = 250 kHz Designed.

BTB26-600BWRG : 25 A Standard and Snubberless Triacs. High current triac Low thermal resistance with clip bonding High commutation (4 quadrant) or very high commutation (3 quadrant) capability BTA series UL1557 certified (File ref: 81734) Packages are RoHS (2002/95/EC) compliant Applications Applications include the ON/OFF function in applications such as static relays, heating regulation, induction motor.

1DF0Q68 : Low Dissipation Factor Disc Capacitors. Ideal for High Voltage Switching to 100 kHz Low DF Minimizes Self Heating at High Frequencies. Application Voltages: 500, 1000 and 1500 Vac. Economical Alternative to Film Capacitors. The 1DFO, 2DFO, and 3DFO Series are designed to operate 500, 1000, and 1500 V RMS, respectively. Their low dissipation factor (DF) and stable temperature characteristics.

B3AL-1000P : TACTILE SWITCH, SPST-NO,PCB. Long-stroke Tactile Switches with High Operating Forces and Long Life. High operating force also providing long life. Long stroke achieved by using a rubber plunger. 1. Switch form (e.g., external shape) Symbol 1 Meaning Standard 4. Operating Force Symbol Packaging 3. Pushbutton Type (Height and Shape) Symbol 0 Meaning Standard Symbol blank P 6. Special.

MC9S08AC8MFJE : Microcontrollers (MCU) 8B 8K FLASH 4K RAM. s: Manufacturer: Freescale Semiconductor ; Product Category: Microcontrollers (MCU) ; RoHS:  Details ; Core: HCS08 ; Processor Series: S08AC ; Data Bus Width: 8 bit ; Maximum Clock Frequency: 40 MHz ; Program Memory Size: 8 KB ; Data RAM Size: 700 B ; On-Chip ADC: Yes ; Operating Supply Voltage: - 0.3 V to + 5.8 V ; Package.

7X-48.000MBA-T : OSCILLATOR, 48 MHz. s: Frequency Stability: ± 25ppm ; Frequency Tolerance: - ; Supply Voltage: 1.8V to 3.3V ; Frequency: 48MHz ; Operating Temperature Range: -10°C to +70°C ; Load Capacitance: 15pF ; Oscillator Mounting: SMD ; No. of Pins: 4 ; MSL: -.

FQPF8N60CYDTU : Fet - Single Discrete Semiconductor Product 7.5A 600V 48W Through Hole; MOSFET N-CH 600V 7.5A TO-220F. s: Mounting Type: Through Hole ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 600V ; Current - Continuous Drain (Id) @ 25° C: 7.5A ; Rds On (Max) @ Id, Vgs: 1.2 Ohm @ 3.75A, 10V ; Input Capacitance (Ciss) @ Vds: 1255pF.

SY55855VKC : Logic - Translator Integrated Circuit (ics) CML, PECL, LVPECL Tube; IC TRANSLATOR DIFF DUAL 10-MSOP. s: Package / Case: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) ; Packaging: Tube ; Input Type: CML, PECL, LVPECL ; Output Type: LVDS ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

A6SN-2104-P : Dip Switch Standard; SWITCH DIP 2POS EXT ACT SMD. s: Actuator Type: Standard ; Orientation: Top Actuated ; Number of Positions: 2 ; Circuit: SPST ; Actuator Level: Raised ; Mounting Type: Surface Mount ; Contact Rating @ Voltage: 0.025A @ 24VDC ; Washable: Yes ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

08-2820-90C : DIP8, IC SOCKET. s: Product Type: IC Socket ; RoHS Compliant: RoHS Compliant ; Socket Type: DIP ; Contact Plating: Gold ; Number of Contacts: 8.

R2500-AP : 0.2 A, 2500 V, SILICON, SIGNAL DIODE, DO-15. s: Package: ROHS COMPLIANT, PLASTIC PACKAGE-2 ; Number of Diodes: 1 ; IF: 200 mA ; RoHS Compliant: RoHS.

QLS6A-FKW-CNSNSF043 : Standard LEDs - SMD RGB. Cree QLS6A and QLS6B RGB LEDs are side-view, surface-mounted (SMD) LEDs designed to minimize the obstruction of the background image for high visual impact. The QLS6A and QLS6B LEDs are built on an innovative PLCC6 package with a shallow cavity, maximizing light output and enabling better color mixing. These tri-color LEDs feature.

0-C     D-L     M-R     S-Z