Details, datasheet, quote on part number: I74F02D
PartI74F02D
Category
Description74F02; Quad 2-input NOR GATE;; Package: SOT108-1 (SO14), SOT27-1 (DIP14)
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload I74F02D datasheet
Cross ref.Similar parts: SN74F02D, CD74ACT02, CD74HCT02, SN74128, SN74AHCT02, SN74ALS02A, SN74AS02, SN74HCT02, SN74LS02, SN74S02
Quote
Find where to buy
 
  

 

Features, Applications

FEATURE
TYPE TYPICAL PROPAGATION DELAY 3.4ns TYPICAL SUPPLY CURRENT (TOTAL) 4.4mA

ORDER CODE DESCRIPTION 14-pin plastic DIP 14-pin plastic SO COMMERCIAL RANGE VCC 5V 10%, Tamb N74F02N N74F02D INDUSTRIAL RANGE VCC 5V 10%, Tamb I74F02N I74F02D PKG DWG SOT27-1 SOT108-1

PINS Dna, Dnb Qn Data inputs Data output DESCRIPTION 74F (U.L.) HIGH/LOW 1.0/1.0 50/33 LOAD VALUE HIGH/LOW 20A/0.6mA 1.0mA/20mA

NOTE: One (1.0) FAST unit load is defined as: 20A in the high state and 0.6mA in the low state.
H NOTES: H = High voltage level L = Low voltage level

(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in high output state Current applied to output in low output state Operating free air temperature range Commercial range Industrial range Storage temperature range PARAMETER RATING 0.5 to VCC to +150 UNIT mA C

SYMBOL PARAMETER MIN VCC VIH VIL IIk IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free air temperature range Commercial range Industrial range LIMITS NOM 5.0 MAX mA C UNIT

(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 MIN VOH VOL VIK II IIH IIL IOS ICC High-level output voltage VCC = MIN, VIL = MAX VIH = MIN, IOH = MAX Low-level output voltage VCC = MIN, VIL = MAX VIH = MIN, IOl = MAX Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Short-circuit output current3 Supply current (total)4 ICCH ICCL VCC = MIN, II = IIK VCC = MAX, = 7.0V VCC = MAX, = 2.7V VCC = MAX, = 0.5V VCC = MAX VCC = MAX VCC = MAX 10%VCC 5%VCC LIMITS TYP2 MAX A mA UNIT

NOTES: 1 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2 All typical values are at VCC = 5V, Tamb 25C. 3 Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. 4 ICC is measured with outputs open.


 

Related products with the same datasheet
N74F02D
Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
I74F02N Quad 2-input NOR GATE
I74F04D Hex Inverter
I74F04N
I74F08D 74F08; Quad Two-input And Gate;; Package: SOT108-1 (SO14), SOT27-1 (DIP14)
I74F109D 74F109; Positive J-knot Positive Edge-triggered Flip-flops;; Package: SOT109 (SO16)
I74F109N Positive J-k Positive Edge-triggered Flip-flops
I74F112D 74F112; Dual J-k Negative Edge-triggered Flip-flop;; Package: SOT109 (SO16)
I74F113D Dual J-k Negative Edge-triggered Flip-flops Without Reset
I74F113N 74F113; Dual J-k Negative Edge-triggered Flip-flops Without Reset;; Package: SOT27-1 (DIP14)
I74F133D 74F133; 13-input NAND Gate;; Package: SOT109 (SO16), SOT38-4 (DIP16)
I74F133N 13.input NAND Gate
I74F138D 1-of-8 Decoder/demultiplexer
I74F138N
I74F14D Hex Inverter Schmitt Trigger
I74F14N
I74F157AD Data Selectors/multiplexers
I74F161AD 4-bit Binary Counter
I74F163AD 74F161A/74F163A; 4-bit Binary Counter;; Package: SOT109 (SO16), SOT38-4 (DIP16)
I74F164D 8-bit Serial-in Parallel-out Shift Register
I74F166D 8-bit Bidirectional Universal Shift Register
I74F175AD 74F175A; Quad D Flip-flop;; Package: SOT109-1 (SO16), SOT38-4 (DIP16)

74F161A : 74F161A/74F163A; 4-bit Binary Counter;; Package: SOT109 (SO16), SOT38-4 (DIP16)

74HC648D : Bus Oriented Circuits 74HC/HCT648; Octal Bus Transceiver/register; 3-state; Inverting

BFG93A/XR : BFG93A; BFG93A/X; NPN 6 GHZ Wideband Transistors;; Package: SOT143B

BTA212X-800B : BAT160 Series; Schottky Barrier Double Diodes

BZX585-B/C3V3 : BZX585 Series; Voltage Regulator Diodes

BZX79-C56 : BZX79 Series; Voltage Regulator Diodes

PCA1673U : PCA167x Series; 32 KHZ Watch Circuits Using a Silver-oxide or a 3 V Lithium Battery

SCN2652 : System Components SCN2652/SCN68652; Multi-protocol Communications Controller (MPCC)

TDA3653C/N1 : Sync/Deflection Vertical Deflection And Guard Circuit (90u)

TEA1782T/N1 : GreenChip PC Secondary Control IC The TEA1781T and TEA1782T are designed to cooperate with the TEA1771T primary side controller in a unique converter topology based on the active clamp forward converter. On the secondary side the output voltages are regulated via bidirectional switches. A typical a

 
0-C     D-L     M-R     S-Z