Details, datasheet, quote on part number: I74F08D
PartI74F08D
Category
Description74F08; Quad Two-input And Gate;; Package: SOT108-1 (SO14), SOT27-1 (DIP14)
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload I74F08D datasheet
Quote
Find where to buy
 
  

 

Features, Applications

TYPE TYPICAL PROPAGATION DELAY 4.1ns TYPICAL SUPPLY CURRENT (TOTAL) 7.1mA

DESCRIPTION 14-pin plastic DIP 14-pin plastic SO COMMERCIAL RANGE VCC 5.0V 10%, Tamb N74F08N N74F08D INDUSTRIAL RANGE VCC 5.0V 10%, Tamb I74F08N I74F08D PKG DWG SOT27-1 SOT108-1

PINS Dna, Dnb Qn Data inputs Data output DESCRIPTION 74F (U.L.) HIGH/LOW 1.0/1.0 50/33 LOAD VALUE HIGH/LOW 20A/0.6mA 1.0mA/20mA

NOTE: One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state.
H NOTES: H = High voltage level L = Low voltage level

(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Commercial range free air temperature range Operating free-air Storage temperature range Industrial range PARAMETER RATING 0.5 to VCC to +150 UNIT mA C

LIMITS SYMBOL VCC VIh VIL IIK IOH IOL Tamb b Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Commercial range Operating O erating free-air tem temperature erature range Industrial range 0 40 PARAMETER MIN NOM 5.0 MAX 5.5 UNIT mA C

(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 VCC = MIN, VIL = MAX VIH = MIN, IOH = MAX Low level output voltage Low-level Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Short-circuit output current3 ICCH VCC = MIN, VIL = MAX VIH = MIN, IOl = MAX VCC = MIN, II = IIK VCC = MAX, = 7.0V VCC = MAX, = 2.7V VCC = MAX, = 0.5V VCC = MAX VCC = MAX VIN 10%VCC 5%VCC LIMITS MIN TYP2 MAX UNIT A mA

ICCL VCC = MAX VIN = GND 12.9 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.


 

Related products with the same datasheet
I74F08N
N74F08D
Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
I74F08N 74F08; Quad Two-input And Gate;; Package: SOT108-1 (SO14), SOT27-1 (DIP14)
I74F109D 74F109; Positive J-knot Positive Edge-triggered Flip-flops;; Package: SOT109 (SO16)
I74F109N Positive J-k Positive Edge-triggered Flip-flops
I74F112D 74F112; Dual J-k Negative Edge-triggered Flip-flop;; Package: SOT109 (SO16)
I74F113D Dual J-k Negative Edge-triggered Flip-flops Without Reset
I74F113N 74F113; Dual J-k Negative Edge-triggered Flip-flops Without Reset;; Package: SOT27-1 (DIP14)
I74F133D 74F133; 13-input NAND Gate;; Package: SOT109 (SO16), SOT38-4 (DIP16)
I74F133N 13.input NAND Gate
I74F138D 1-of-8 Decoder/demultiplexer
I74F138N
I74F14D Hex Inverter Schmitt Trigger
I74F14N
I74F157AD Data Selectors/multiplexers
I74F161AD 4-bit Binary Counter
I74F163AD 74F161A/74F163A; 4-bit Binary Counter;; Package: SOT109 (SO16), SOT38-4 (DIP16)
I74F164D 8-bit Serial-in Parallel-out Shift Register
I74F166D 8-bit Bidirectional Universal Shift Register
I74F175AD 74F175A; Quad D Flip-flop;; Package: SOT109-1 (SO16), SOT38-4 (DIP16)
I74F175AN Quad D Flip-flop
I74F175D
I74F175N

1N4150 : Small Signal 1N4150; 1N4151; High-speed Diodes

74HCT4066D : Analog Switches 74HC4066; 74HCT4066; Quad Bilateral Switches;; Package: SOT108-1 (SO14), SOT27-1 (DIP14), SOT337-1 (SSOP14), SOT402-1 (TSSOP14)

BZX399-C30 : BZX399 Series; Voltage Regulator Diodes

BZX84-A/B/C5V6 : BZX84 Series; Voltage Regulator Diodes

HEF4938BT : CMOS/BiCMOS->4000 Family HEF4938B; Dual Precision Monostable Multivibrator

P80C32UB : 80C51 Family

P87LPC761BN : 80C51 architecture P87LPC761; Low Power, Low Price, Low Pin Count (16 Pin) Microcontroller With 2 Kbyte OTP;; Package: SOT38-1 (DIP16)

PZTA56 : PZTA56; PNP General Purpose Transistor

TEA1112AT : Interface/transmission TEA1112; TEA1112A; Low Voltage Versatile Telephone Transmission Circuits With Dialler Interface;; Package: SOT109 (SO16), SOT38-4 (DIP16)

 
0-C     D-L     M-R     S-Z