Details, datasheet, quote on part number: TISP6NTP2ADR
PartTISP6NTP2ADR
CategoryDiscrete => Thyristors => Surge Protectors => Quad Programmable Thyristor Surge Protector
TitleQuad Programmable Thyristor Surge Protector
DescriptionQuad Programmable Thyristor Surge Protector
CompanyPower Innovations
DatasheetDownload TISP6NTP2ADR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Independent Overvoltage Protection for Two SLICs in Short Loop Applications: Wide -90 V Programming Range Low 5 mA max. Gate Triggering Current High 150 mA min. (85 C) Holding Current Specified & 0.5/700 Limiting Voltage Full 85 C Temperature Range Rated for Common Impulse Waveforms

Description

The TISP6NTP2A has been designed for short loop systems such as: WILL (Wireless In the Local Loop) FITL (Fibre In The Loop) DAML (Digital Added Main Line, Pair Gain) SOHO (Small Office Home Office) ISDN-TA (Integrated Services Digital Network Terminal Adaptors)

TERMINAL ADAPTOR SLIC 1 PROCESSOR SLIC TISP6 NTP2A POTS 2 POTS 1

Device TISP6NTP2A Carrier Order # Tape and Reel TISP6NTP2ADR D, Small-Outline Tube TISP6NTP2AD Package

JUNE 1998 - REVISED JUNE 2003 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

These systems often have the need to source two POTS (Plain Old Telephone Service) lines, one for a telephone and the other for a facsimile machine. In a single surface mount package, the TISP6NTP2A protects the two POTS line SLICs (Subscriber Line Interface Circuits) against overvoltages caused by lightning, a.c. power contact and induction. The TISP6NTP2A has an array of four buffered P-gate forward conducting thyristors with twin commoned gates and a common anode connection. Each thyristor cathode has a separate terminal connection. An antiparallel anode-cathode diode is connected across each thyristor. The buffer transistors reduce the gate supply current. In use, the cathodes an TISP6NTP2A thyristor are connected to the four conductors of two POTS lines (see applications information). Each gate is connected to the appropriate negative voltage battery feed of the SLIC driving that line pair. By having separate gates, each SLIC can be protected at a voltage level related to the negative supply voltage of that individual SLIC. The anode of the TISP6NTP2A is connected to the SLIC common. Positive overvoltages are clipped to common by forward conduction of the TISP6NTP2A antiparallel diode. Negative overvoltages are initially clipped close to the SLIC negative supply by emitter follower action of the TISP6NTP2A buffer transistor. If sufficient clipping current flows, the TISP6NTP2A thyristor will regenerate and switch into a low voltage on-state condition. As the overvoltage subsides, the high holding current of the TISP6NTP2A prevents d.c. latchup.

Absolute Maximum Ratings, 25 C (Unless Otherwise Noted)

Rating Repetitive peak off-state voltage, 85 C Repetitive peak gate-cathode voltage, VKA 85 C Non-repetitive peak on-state pulse current, TJ 85 C, (see Notes 1 and 10/1000 s (Bellcore GR-1089-CORE, Issue 1, November 1994, Section s (I3124, open-circuit voltage wave shape 0.5/700 s) 5/310 s (ITU-T & K.21, open-circuit voltage wave shape 10/700 s) 8/20 s (IEC 61000-4-5:1995, open-circuit voltage wave shape 1.2/50 s) 2/10 s (Bellcore GR-1089-CORE, Issue 1, November 1994, Section 4) Non-repetitive peak on-state current, 50/60 Hz, TJ 85 C, (see Notes 1 and 900 s Non-repetitive peak gate current, 1/2 s pulse, cathodes commoned (see Note 1) Operating free-air temperature range Junction temperature Storage temperature range ITSM +150 A ITSP A Symbol VDRM VGKRM Value -100 -90 Unit V

NOTES: 1. Initially, the protector must be in thermal equilibrium with TJ 85 C. The surge may be repeated after the device returns to its initial conditions. 2. These non-repetitive rated currents are peak values for either polarity. The rated current values may be applied to any cathodeanode terminal pair. Additionally, all cathode-anode terminal pairs may have their rated current values applied simultaneously (in this case the anode terminal current will be four times the rated current value of an individual terminal pair). Above 85 C, derate linearly to zero 150 C lead temperature.

Min. CG Gate decoupling capacitor Series resistor for GR-1089-CORE first-level surge survival Series resistor for ITU-T recommendation K.20 Series resistor for ITU-T recommendation K.21 Series resistor for IEC 61000-4-5:1995, class 1.2/50 or Typ. 220 Max. Unit nF

Electrical Characteristics for any Section, 25 C (Unless Otherwise Noted)
Parameter ID Off-state current VD = VDRM, = 0 Test Conditions 85 C Min. Typ. Max. s V Unit A

Breakover voltage Breakdown time Forward voltage Peak forward recovery voltage Forward recovery time Holding current Gate reverse current Gate reverse current, on state Gate reverse current, forward conducting state Gate trigger current Gate trigger voltage Anode-cathode offstate capacitance

-20 A, IEC 61000-4-5:1995 combination impulse generator, VGG A, I3124 impulse generator, VGG A, I3124 impulse generator, V(BR) = 500 s, VGG = 500 s, VGG 20 A, IEC 61000-4-5:1995 combination impulse generator, VGG A, I3124 impulse generator, VGG A, I3124 impulse generator, VGG -1 A, di/dt = 1A/ms, VGG 85 C VGG = VGKRM, VAK = 500 s, VGG 5 V

3: These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The unmeasured device terminals are a.c. connected to the guard terminal of the bridge.

Parameter RJA Junction to free air thermal resistance Test Conditions Ptot = 85 C, cm2, FR4 PCB Min. Typ. Max. 160 Unit C/W


 

Some Part number from the same manufacture Power Innovations
TISP6NTP2BDR Quad Programmable Thyristor Surge Protector
TISP6NTP2CDR
TISP7015L1DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7070H3SL
TISP7072F3 Triple Bidirectional Thyristor Overvoltage Protectors
TISP7072F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7080H3SL
TISP7082F3 Triple Bidirectional Thyristor Overvoltage Protectors
TISP7082F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7095H3SL
TISP7125F3 Triple Bidirectional Thyristor Overvoltage Protectors
TISP7125F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7125H3SL
TISP7150F3 Triple Bidirectional Thyristor Overvoltage Protectors
TISP7150F3D Triple Symmetrical Overvoltage Tisp For 3 Wire Isdn / Interwire Protection
TISP7150F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7165H3SL
TISP7180F3 Triple Bidirectional Thyristor Overvoltage Protectors
TISP7180F3D Triple Symmetrical Overvoltage Tisp For 3 Wire Isdn / Interwire Protection
TISP7180F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector
TISP7180H3SL
Same catergory

CMR1-10M : General Purpose Rectifier 1.0 Amp, 200 Thru 1,000v. CMR1-06M CMR1-10M GENERAL PURPOSE RECTIFIER 1.0 AMP, 200 THRU 1,000 VOLTS : SUPER MINIATURE CASE SPECIAL SELECTIONS AVAILABLE LOW COST SUPERIOR LOT TO LOT CONSISTENCY HIGH RELIABILITY "C" BEND CONSTRUCTION PROVIDES STRAIN RELIEF WHEN MOUNTED ON PC BOARD GLASS PASSIVATED CHIP : The CENTRAL SEMICONDUCTOR 1.0 Amp Surface Mount Silicon Rectifier is a high.

FQU7P20 : 200V P-channel QFET.

FW2504P : Dual P-channel 2.5v Specified Powertrench(r) MOSFET: 20v, 5.5a. This N-Channel 2.5V specified MOSFET is a rugged gate version of Fairchild's Semiconductor's advanced PowerTrench process. It has been optimized for power management applications with a wide range of gate drive voltage 12V). Extended VGSS range (12V) for battery applications Low gate charge High performance trench technology for extremely low RDS(ON).

NTE197 : Silicon Complementary Transistors Audio Power Output And Medium Power Switching.

SRP18U : High Voltage Diode Selection Guide 1.8KV .010 100 Surface Mount Gull-wing.

08055A180KA74A : CAPACITOR, CERAMIC, MULTILAYER, 50 V, C0G, 0.000018 uF, SURFACE MOUNT, 0805. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 1.80E-5 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 50 volts ; Temperature Coefficient: 30 ppm/°C ; Mounting Style: Surface.

AR0402 : RESISTOR; JUMPER, METAL GLAZE/THICK FILM, 0.0625 W, 1; 5 %, 100; 200 ppm, 1 ohm - 10000000 ohm, SURFACE MOUNT, 0402. s: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0402, CHIP, ROHS COMPLIANT ; Operating DC Voltage: 50 volts ; Operating Temperature: -55 to 155 C (-67.

B43508A2108M060 : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200 V, 1000 uF, THROUGH HOLE MOUNT. s: RoHS Compliant: Yes ; : Polarized ; Capacitance Range: 1000 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 200 volts ; Leakage Current: 1545 microamps ; ESR: 120 milliohms ; Mounting Style: Through Hole ; Operating Temperature: -40 to 105 C (-40 to 221 F).

LQG21F220N00 : 1 ELEMENT, 22 uH, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Lead Style: WRAPAROUND ; Molded / Shielded: Shielded ; Application: General Purpose, RF Choke ; Inductance Range: 22 microH ; Rated DC Current: 13 milliamps ; Operating Temperature: -40 to 85 C (-40 to 185 F).

MBRD650 : 3 A, 50 V, SILICON, RECTIFIER DIODE, TO-252AA. s: Arrangement: Common Catode ; Diode Type: General Purpose, RECTIFIER DIODE ; Diode Applications: Rectifier ; IF: 3000 mA ; Package: D-PAK-3 ; Pin Count: 2 ; Number of Diodes: 2.

NRN1/4 : RESISTOR, 0.25 W, 0.5; 1; 2; 5 %, 10 ohm - 500 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED.

PDTA115EEF,115 : 20 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR. s: Polarity: PNP ; Package Type: PLASTIC, SC-89, 3 PIN.

SBCH41R0J : RESISTOR, WIRE WOUND, 4 W, 5 %, 400 ppm, 1 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Technology / Construction: Wirewound ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED, ROHS COMPLIANT ; Resistance Range: 1 ohms ; Tolerance: 5 +/- % ; Temperature Coefficient: 400 ±ppm/°C ; Power Rating: 4 watts (0.0054 HP) ; Standards.

SI-40221 : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer ; Operating Temperature: -40 to 85 C (-40 to 185 F).

T53Y100KMB41 : RES,TAPPED,CERMET,100K OHMS,158WVDC,20% +/-TOL,-100,100PPM TC,2020 CASE. s: Potentiometer Type: Trimmer.

TLA050-3E : DATACOM TRANSFORMER FOR LAN APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer ; Operating Temperature: 0 to 70 C (32 to 158 F).

20TQC15M : CAPACITOR, TANTALUM, SOLID, POLARIZED, 20 V, 15 uF, SURFACE MOUNT. s: Applications: General Purpose ; Electrolytic Capacitors: Tantalum ; : Polarized ; Capacitance Range: 15 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 20 volts ; Mounting Style: Surface Mount Technology ; Operating Temperature: -55 to 105 C (-67 to 221 F).

2N389 : 3 A, 60 V, NPN, Si, POWER TRANSISTOR, TO-53. s: Polarity: NPN ; Package Type: TO-53, 3 PIN.

 
0-C     D-L     M-R     S-Z