|Category||Discrete => Thyristors => Surge Protectors => Fixed Voltage Triple Element Bidirectional Thyrist|
|Title||Fixed Voltage Triple Element Bidirectional Thyrist|
|Description||Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|Datasheet||Download TISP7070H3SL datasheet
TISP7070H3SL THRU TISP7095H3SL, TISP7125H3SL THRU TISP7220H3SL, TISP7250H3SL THRU TISP7400H3SL TRIPLE ELEMENT BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
This TISP® device series protects central office, access and customer premise equipment against overvoltages on the telecom line. The TISP7xxxH3SL has the same symmetrical bidirectional protection on any terminal pair; R-T, R-G and T-G. In addition, the device is rated for simultaneous R-G and T-G impulse conditions. The TISP7xxxH3SL is available in a wide range of voltages and has a high current capability, allowing minimal series resistance to be used. These protectors have been specified mindful of the following standards and recommendations: GR-1089-CORE, FCC Part EN 60950, IEC 60950, ITU-T K.20, K.21 and K.45. The TISP7350H3SL meets the FCC Part 68 "B" ringer voltage requirement and survives both Type A and B impulse tests. These devices are housed in a through-hole 3-pin single-in-line (SL) plastic package.MARCH 1999 - REVISED OCTOBER 2000 Specifications are subject to change without notice.
ITU-T K.20/21 Rating. A 5/310 Ion-Implanted Breakdown Region Precise and Stable Voltage Low Voltage Overshoot under SurgeRated for International Surge Wave Shapes - Single and Simultaneous Impulses
3-Pin Through-Hole Packaging - Compatible with TO-220AB pin-out -Low Height.................................................................... 8.3 mm Low Differential Capacitance....................................... < 72 pF.............................................. UL Recognized ComponentDescription
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line. Each terminal pair, T-G, R-G and T-R, has a symmetrical voltage-triggered bidirectional thyristor protection characteristic. Overvoltages are initially clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on state. This low-voltage on state causes the current resulting from the overvoltage to be safely diverted through the device. The high crowbar holding current prevents d.c. latchup as the diverted current subsides.Device TISP7xxxH3 Package SL (Single-in-Line) Carrier Tube Order As TISP7xxxH3SL
Insert xxx value corresponding to protection voltages of etc.
This TISP7xxxH3SL range consists of fifteen voltage variants to meet various maximum system voltage levels to 300 V). They are guaranteed to voltage limit and withstand the listed international lightning surges in both polarities. These high current protection devices are a 3-pin single-in-line (SL) plastic package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in SL packaged protectors, consult the factory. For lower rated impulse currents in the SL package, the 10/1000 TISP7xxxF3SL series is available. These monolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and matched breakover control and are virtually transparent to the system in normal operation.Absolute Maximum Ratings, 25 °C (Unless Otherwise Noted)
Repetitive peak off-state voltage, (see Note 1)
Non-repetitive peak on-state pulse current (see Notes 2, and 3) 2/10 (Telcordia GR-1089-CORE, 2/10 voltage wave shape) 8/20 µs (IEC 1.2/50 µs voltage, 8/20 current combination wave generator) 10/160 µs (FCC Part 10/160 µs voltage wave shape) 4/250 (ITU-T K.20/21, 10/700 voltage wave shape, dual) 0.2/310 (CNET 31-24, 0.5/700 voltage wave shape) 5/310 (ITU-T K.20/21, 10/700 voltage wave shape, single) 5/320 µs (FCC Part 9/720 µs voltage wave shape) 10/560 µs (FCC Part 10/560 µs voltage wave shape) 10/1000 (Telcordia GR-1089-CORE, 10/1000 voltage wave shape) Non-repetitive peak on-state current (see Notes 2, 3 and ms (50 Hz) full sine wave ms (60 Hz) full sine wave Hz/60 Hz a.c. Initial rate of rise of on-state current, Exponential current ramp, Maximum ramp value 200 A Junction temperature Storage temperature range
NOTES: 1. Derate value at -0.13%/°C for temperatures below 25 °C. 2. Initially the TISP7xxxH3 must be in thermal equilibrium. 3. These non-repetitive rated currents are peak values of either polarity. The rated current values may be applied to any terminal pair. Additionally, both R and T terminals may have their rated current values applied simultaneously (in this case the G terminal return current will be the sum of the currents applied to the R and T terminals). The surge may be repeated after the TISP7xxxH3 returns to its initial conditions. 4. EIA/JESD51-2 environment and EIA/JESD51-3 PCB with standard footprint dimensions connected with 5 A rated printed wiring track widths. Derate current values at -0.61 %/°C for ambient temperatures above 25 °C.
|Related products with the same datasheet|
|Some Part number from the same manufacture Power Innovations|
|TISP7072F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7072F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|TISP7082F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7082F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|TISP7125F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7125F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|TISP7150F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7150F3D Triple Symmetrical Overvoltage Tisp For 3 Wire Isdn / Interwire Protection|
|TISP7150F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|TISP7180F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7180F3D Triple Symmetrical Overvoltage Tisp For 3 Wire Isdn / Interwire Protection|
|TISP7180F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
|TISP7240F3 Triple Bidirectional Thyristor Overvoltage Protectors|
|TISP7240F3D Triple Symmetrical Overvoltage Tisp For 3 Wire Isdn / Interwire Protection|
|TISP7240F3DR Fixed Voltage Triple Element Bidirectional Thyristor Surge Protector|
BD243C : NPN Silicon Power Transistors
BD897A : NPN Silicon Power Darlingtons
TIC106S : Series Silicon Controlled Rectifiers
TIP152 : NPN Silicon Power Darlingtons
TIPP32 : PNP Silicon Power Transistors
TISP1082F3SL : Fixed Voltage Dual Unidirectional Thyristor Surge Fixed Voltage Dual Unidirectional Thyristor Surge Protector
TISP2072F3D : Symmetrical Overvoltage Tisp For 3 Wire Battery Backed Ringer Protection
TISP2320F3DR : Symmetrical Overvoltage Tisp For 3 Wire Battery Backed Ringer Protection
TISP4350M3LMFR : Fixed Voltage Single Bidirectional Fixed Voltage Single Bidirectional
TISP4350MMAJR : Fixed Voltage Single Bidirectional Fixed Voltage Single Bidirectional
TISP7180F3 : Triple Bidirectional Thyristor Overvoltage Protectors
ASI10552 : NPN Silicon RF Power Transistor.
BAW101 : Silicon Switching Diode Array. Symbol VR VRM IF IFM IFS Ptot Tj Tstg Symbol RthJS Value Diode reverse voltage Peak reverse voltage Forward current Peak forward current Surge forward current, 1 µs Total power dissipation calculation of RthJA please refer to Application Note Thermal Resistance Electrical Characteristics = 25°C, unless otherwise specified Symbol Values Unit Parameter.
BYD37 : BYD37 Series; Fast Soft-recovery Controlled Avalanche Rectifiers. BYD37 series Fast soft-recovery controlled avalanche rectifiers Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability Smallest surface mount rectifier outline Shipped 8 mm embossed tape. and fatigue free as coefficients of expansion of all used parts are matched.
ESJA09 : High Voltage Diode. ESJA09 is high reliability resin molded type high voltage diode in small size package which is sealed (a multilayed mesa type silicon chip) by epoxy resin. Ultra high speed switching Low VF High surge resisitivity for CRT discharge High reliability design Ultra small pakage Applications Rectification for CRT display monitor high voltage power supply.
FP206 : . Composite type with a PNP transistor and an NPN transistor in one package, facilitating high-density mounting. The FP206 is composed of 2 chips, one being equivalent to the 2SA1728 and the other 2SC4519, placed in one package. Electrical Connection s Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current.
FQU1N50 : 500V N-channel QFET.
FS16KM-9 : Type = Planar Process=>200V ;; Voltage = 450V ;; Rdson = 450 ;; Package = Obsolete ;; Drive Voltage = N/a.
GI1-1200thruGI1-1600 : . Miniature High Voltage Glass Passivated Rectifier High temperature metallurgically bonded construction Cavity-free glass passivated junction 1.0 ampere operation at TA=75°C with no thermal runaway Typical IR less than 0.1µA Hermetically sealed package Capable of meeting environmental standards of MIL-S-19500 High temperature soldering guaranteed: 350°C/10.
MMBC1622DF : NPN ( Amplifier Transistor ).
ZVP4525G : . ( This 250V enhancement mode N-channel MOSFET provides users with a competitive offering efficient power handling capability, high impedance and is free from thermal runaway and thermally induced secondary breakdown. Applications benefiting from this device include a variety of Telecom and general high voltage circuits. SOT89 and SOT23-6 versions are also.
03029BR122AJZC : CAPACITOR, CERAMIC, MULTILAYER, 50 V, BR, 0.0012 uF, SURFACE MOUNT, 0402. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 0.0012 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 50 volts ; Mounting Style: Surface Mount Technology.
05002470CMZP : CAPACITOR, CERAMIC, MULTILAYER, 200 V, BP, 0.000047 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; Capacitance Range: 4.70E-5 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 200 volts ; Temperature Coefficient: 30 ppm/Â°C ; Mounting Style: Surface Mount Technology.
ST303S08PFK0P : SILICON CONTROLLED RECTIFIER,800V V(DRM),300A I(T),TO-209AE. s: Thyristor Type: SCR ; Standards and Certifications: RoHS.
2225F123J101C : CAP,CERAMIC,12NF,100VDC,5% -TOL,5% +TOL,Y5V TC CODE,-80,30% TC,2225 CASE. s: Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition.
2SA812M3-A : 100 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR. s: Polarity: PNP ; Package Type: PLASTIC, MINIMOLD PACKAGE-3.