Details, datasheet, quote on part number: M53620412DB0
PartM53620412DB0
CategoryMemory => DRAM => Async DRAM => Modules => SIMM
TitleSIMM
DescriptionDescription = M53620412DB0 4M X 36 DRAM Simm Using 4M X 4 FP And 4M X 4 Quad Cas, 2K Refresh, 5V ;; Density(MB) = 16 ;; Organization = 4Mx36 ;; Mode = Fast Page ;; Refresh = 2K/32ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component Composition = (4Mx4)x8 ;; Production Status = Eol ;; Comments = Gold
CompanySamsung Semiconductor, Inc.
DatasheetDownload M53620412DB0 datasheet
  

 

Features, Applications

M53620412DW0/DB0 with Fast Page Mode x 36 DRAM SIMM using 4Mx4 FP and 4Mx4 Quad CAS, 2K Refresh, 5V

The Samsung a 4Mx36bits Dynamic RAM high density memory module. The Samsung M53620412D consists of eight CMOS 4Mx4bits DRAMs in 24-pin SOJ package and one CMOS 4Mx4 bit Quad CAS DRAM in 28-pin SOJ package mounted a 72-pin glass-epoxy substrate. or 0.22uF decoupling capacitor is mounted on the printed circuit board for each DRAM. The is a Single In-line Memory Module with edge connections and is intended for mounting into 72 pin edge connector sockets.

FEATURES

Part Identification M53620412DW0(2048 cycles/32ms Ref, SOJ, Solder) M53620412DB0(2048 cycles/32ms Ref, SOJ, Gold) Fast Page Mode Operation CAS-before-RAS refresh capability RAS-only and Hidden refresh capability TTL compatible inputs and outputs Single +5V10% power supply JEDEC standard PDPin & pinout PCB : Height(1000mil), single sided component

Pin Name PD1 -PD4 Vcc Vss NC Function Address Inputs(2K Ref) Data In/Out Read/Write Enable Row Address Strobe Column Address Strobe Presence Detect Power(+5V) Ground No Connection

SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice.


Item Voltage on any pin relative to VSS Voltage on VCC supply relative to VSS Storage Temperature Power Dissipation Short Circuit Output Current Symbol VIN, VOUT VCC Tstg Pd IOS

* Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for intended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS (Voltage referenced to VSS, to 70C)

Item Supply Voltage Ground Input High Voltage Input Low Voltage : VCC+2.0V/20ns, Pulse width is measured at VCC. : -2.0V/20ns, Pulse width is measured at VSS. Symbol VCC VSS VIH VIL Min Typ 5.0 0 Max VCC+1*1 0.8 Unit

DC AND OPERATING CHARACTERISTICS (Recommended operating conditions unless otherwise noted)

Symbol ICC5 ICC6 II(L) IO(L) VOH VOL Speed -C50 -C60 Dont care -C50 -C60 Dont care -C50 -C60 Dont care Dont care KMM5364003CK/DB0 Min

ICC1 : Operating Current * (RAS, CAS, Address cycling @tRC=min) ICC2 : Standby Current (RAS=CAS=W=VIH) ICC3 : RAS Only Refresh Current * (CAS=VIH, RAS cycling @tRC=min) ICC4 : Fast Page Mode Current * (RAS=VIL, CAS Address cycling : tPC=min) ICC5 : Standby Current ICC6 : CAS-Before-RAS Refresh Current * (RAS and CAS cycling @tRC=min) II(L) : Input Leakage Current (Any input 0VINVcc+0.5V, all other pins not under test=0 V) IO(L) : Output Leakage Current(Data Out is disabled, 0VVOUTVcc) VOH : Output High Voltage Level (IOH = -5mA) VOL : Output Low Voltage Level (IOL 4.2mA) * NOTE ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1 and ICC3 , address can be changed maximum once while RAS=VIL. In ICC4, address can be changed maximum once within one page mode cycle, tPC.


 

Some Part number from the same manufacture Samsung Semiconductor, Inc.
M53620800CB0 Description = M53620800CW0 8MB X 36 DRAM Simm Using 4MB X 4 And 16MB Quad Cas, 4KB/2KB Refresh, 5V ;; Density(MB) = 32 ;; Organization = 8Mx36 ;; Mode = Fast Page ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60
M53620800DB0 Fast Page Mode 8mx36dram Simm Using 4mx4 And 16m Quad Cas, 4k/2k Refresh, 5v
M53620800DW0
M53620805BT0 Description = M53620805BY0 8MBx36 DRAM Simm Using 4MBx16 & Quad Cas 4MBx4, 4KB Refresh, 5V ;; Density(MB) = 32 ;; Organization = 8Mx36 ;; Mode = Fast Page ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53620810CB0 Fast Page Mode 8mx36dram Simm Using 4mx4 And 16m Quad Cas, 4k/2k Refresh, 5v
M53620810CW0
M53620810CW0/CB0 8mx36 DRAM Simm Using 4mx4 And 16m Quad Cas, 4k/2k Refresh, 5v With Fast Page Mode
M53620810DB0 Fast Page Mode 8mx36dram Simm Using 4mx4 And 16m Quad Cas, 4k/2k Refresh, 5v
M53620810DW0
M53620812CB0 Description = M53620812CW0 8MB X 36 DRAM Simm Using 4MB X 4 FP And 4MB X 4 Quad Cas, 2KB Refresh, 5V ;; Density(MB) = 32 ;; Organization = 8Mx36 ;; Mode = Fast Page ;; Refresh = 2K/32ms ;; Speed(ns) = 50,60
M53620812DB0 Description = M53620812DW0 8M X 36 DRAM Simm Using 4M X 4 FP And 4M X 4 Quad Cas, 2K Refresh, 5V ;; Density(MB) = 32 ;; Organization = 8Mx36 ;; Mode = Fast Page ;; Refresh = 2K/32ms ;; Speed(ns) = 50,60
M53631601BE0 Description = M53631601BE0 16MBx36 DRAM Simm Using 16MBx4 & 16MBx1, 4KB Refresh, 5V ;; Density(MB) = 64 ;; Organization = 16Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53631601BJ0 Description = M53631601BJ0 16MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 64 ;; Organization = 16Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53631601CE0 Description = M53631601CE0 16MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 64 ;; Organization = 16Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53631601CJ0 Description = M53631601CJ0 16MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 64 ;; Organization = 16Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53631601CJ0-C Description = M53631601CE0 16MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 64 ;; Organization = 16Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53633201BE0 Description = M53633201BE0 32MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 128 ;; Organization = 32Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53633201BJ0 Description = M53633201BJ0 32MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 128 ;; Organization = 32Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53633201BJ0-C Description = M53633201BE0 32MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 128 ;; Organization = 32Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53633201CE0 Description = M53633201CE0 32MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 128 ;; Organization = 32Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component
M53633201CJ0 Description = M53633201CJ0 32MB X 36 DRAM Simm Using 16MB X 4 & 16MB X 1, 4KB Refresh, 5V ;; Density(MB) = 128 ;; Organization = 32Mx36 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 72 ;; Component

K4D553238E : ->Graphics Memory Description = K4D553238E 2M X 32Bit X 4 Banks Double Data Rate Synchronous DRAM With Bi-directional Data Strobe And DLL ;; Organization = 8Mx32 ;; Vdd/Vddq(V) = 2.5(2.2~2.625 For 300MHz) ;; Speed(ns) = 3.3,3.6,4.0,5.0 ;; Refresh = 4K/32ms ;; Package = 144FBGA(MCP) ;; Interface = SSTL_2 ;; Production

K6T1008C2C-TF70 : Description = K6T1008C2C 128K X 8 Bit Low Power CMOS Static RAM ;; Organization = 128Kx8 ;; Vcc(V) = 4.5~5.5 ;; Speed-tAA(ns) = 55,70 ;; Operating Temperature = C,i ;; Operating Current(mA) = 60 ;; Standby Current(uA) = 15 ;; Package = 32DIP,32SOP,32TSOP1 ;; Production Status = Eol ;; Comments = Con

KS86C6408 : S3C9(KS86) Series Description = KS86C6408 Single-chip 8-bit Microcontroller ;; ROM(KB) = 8 ;; RAM(bytes) = 208 ;; I/o Pins = 32 ;; Interrupt (Int/Ext) = 2/27 ;; Timer/counters = BT/WDT/8T ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh) = (8x1) ;; Max. OSC.Freq. (MHz) = 6 ;; VDD(V) = 4.

M374S0823CTL : Unbuffered DIMM Description = M374S0823CTL 8M X 72 Sdram Dimm With Ecc Based on 8M X 8, 4Banks, 4K Refresh, 3.3V Synchronous DRAMs With SPD ;; Density(MB) = 64 ;; Organization = 8Mx72 ;; Bank/ Interface = 4B/LVTTL ;; Refresh = 4K/64ms ;; Speed = 10 ;; #of Pin = 168 ;; Power = C ;; Component Composition = (8Mx8)x9+E

K4S64323LF-SU75-PB : 512K x 32bit x 4 Banks Mobile Sdram in 90fbga

AT-LC-U-SM-17-D : RF/MICROWAVE FIXED ATTENUATOR, 20 dB INSERTION LOSS-MAX Specifications: Attenuator Type: Fixed ; Insertion Loss: 20 dB ; Attenuation: 1 dB

AT-SC-U-SM-17-D : RF/MICROWAVE FIXED ATTENUATOR, 20 dB INSERTION LOSS-MAX Specifications: Attenuator Type: Fixed ; Insertion Loss: 20 dB ; Attenuation: 1 dB

KS88P0416N-XX : 8-BIT, OTPROM, MICROCONTROLLER, PDIP32 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 8 MHz ; ROM Type: OTP ; Supply Voltage: 2.2 to 5.5 volts ; I/O Ports: 26 ; Package Type: SDIP, Other, 0.400 INCH, SDIP-32 ; Operating Range: Industrial ; Pin Count: 32 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features: PWM

M470T2953BS3-CCC : 128M X 64 DDR DRAM MODULE, 0.6 ns, ZMA200 Specifications: Memory Category: DRAM Chip ; Density: 8589935 kbits ; Number of Words: 128000 k ; Bits per Word: 64 bits ; Package Type: SODIMM-200 ; Pins: 200 ; Supply Voltage: 1.8V ; Access Time: 0.6000 ns

Same catergory

71T75702 : ZBT (Zero Bus Turnaround) SRAM. 2.5V 512K X 36 ZBT Synchronous 2.5V I/o Flow-through SRAM.

72105 : 256 X 16 Parallel-to-serial Fifo, 5.0V. 25ns parallel port access time, 35ns cycle time 45MHz serial output shift rate Wide x16 organization offering easy expansion Low power consumption (50mA typical) Least/Most Significant Bit first read selected by asserting the FL/DIR pin Four memory status flags: Empty, Full, Half-Full, and Almost-Empty/Almost-Full Dual-Port zero fall-through architecture.

DP3Z2MX16PMBY5 : Module/PCMCIA->32M Byte. 32 MB 3.3 Volt CMOS Flash EePROM. : The a 32 megabit 3.3 Volt only CMOS Flash EEPROM (Electrically In-System Programmable and Erasable ROM Memory) module. These modules are constructed of two x 16 FLASH EEPROM' s that are configured x 16. The module high speed access times with common data inputs and outputs. The Flash devices used in this module also BGO (Blank Ground Operations).

DPSD128MX8XKY5 : 1 Gigabit Synchronous DRAM. : The Memory StackTM series is a family of interchangeable memory modules. The 1 Gigabit SDRAM is a member of this family which utilizes the space saving LP-StackTM TSOP stacking technology. The modules are constructed with two 64 Meg x 8 SDRAMs. This 1 Gigabit LP-StackTM module, DPSD128MX8XKY5, has been designed to fit the same footprint as the 64 Meg x 8 SDRAM.

GMS77C1000 : EPROM Programming/verfify . 9''UHTXLUHPHQWDQGWKHYHULI\DW9 ''PD[DQG9''PLQ UHTXLUHPHQW PD\ RQO\ EH FODVVLILHG DV SURWRW\SH RU GHYHORSPHQW SURJUDPPHU EXW QRW D SURGXFWLRQ SUR JUDPPHU " 1RWH 'HYLFH PXVW EH YHULILHG DW PLQLPXP DQG PD[L PXP VSHFLILHG RSHUDWLQJ YROWDJHV DV VSHFLILHG LQ WKH GDWDVKHHW 3 : 'D+ .

HYM71V16635HCT6 : ->Unbuffered DIMM. based on 8Mx16 SDRAM with LVTTL, 4 banks & 4K Refresh The Hynix HYM71V16635HCT6 Series are 16Mx64bits Synchronous DRAM Modules. The modules are composed of eight 8Mx16bits CMOS Synchronous DRAMs 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package a 168pin glass-epoxy printed circuit board. Two 0.33uF and one 0.1uF decoupling capacitors.

HYR166440G-653 : 128 MB. 64MB - 512MB, 184pin. Direct RDRAM RIMM Modules (with 288 Mbit RDRAMs) Overview The Direct RambusTM RIMMTM module is a general purpose high-performance memory subsystem suitable for use in a broad range of applications including computer memory, personal computers, workstations, and other applications where high bandwidth and low latency are required. The Direct Rambus RIMM.

KMM366S1723T : Unbuffered DIMM. = KMM366S1723T 16Mx64 Sdram Dimm Based on 16Mx8, 4Banks, 4K Refresh, 3.3V Synchronous DRAMs With SPD ;; Density(MB) = 128 ;; Organization = 16Mx64 ;; Bank/ Interface = 4B/LVTTL ;; Refresh = 4K/64ms ;; Speed = G8,GH,GL ;; #of Pin = 168 ;; Power = G ;; Component Composition = (16Mx8)x8+EEPROM ;; Production Status = Eol ;; Comments = PC100.

M15342EJ2V0DS00 : Flash Memory + SRAM. MCP (MULTI-CHIP PACKAGE) FLASH MEMORY AND SRAM 32M-BIT FLASH MEMORY AND 8M-BIT SRAM The is a stacked type MCP (Multi-Chip Package) of 33,554,432 bits (BYTE mode : 4,194,304 words by 8 bits, WORD mode : 2,097,152 words by 16 bits) flash memory and 8,388,608 bits (BYTE mode : 1,048,576 words by 8 bits, WORD mode : 524,288 words by 16 bits) static RAM.

M372C0883BT0 : Buffered DIMM. = M372C0883BT0 8Mx72 DRAM Dimm With Ecc Using 8Mx8,4K&8K Refresh,5V ;; Density(MB) = 64 ;; Organization = 8Mx72 ;; Mode = Fast Page ;; Refresh = 8K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 168 ;; Component Composition = (8Mx8)x9+Drive ICx2 ;; Production Status = Eol ;; Comments = Buffered.

M41T94MH : 512 Bit 64 Bit x8 Serial RTC Spi SRAM. SERIAL PERIPHERAL INTERFACE (SPI) TO 5.5V OSCILLATOR OPERATING VOLTAGE AUTOMATIC SWITCH-OVER and DESELECT CIRCUITRY CHOICE OF POWER-FAIL DESELECT VOLTAGES (VCC 5.5V): THS = VSS; 2.55V VPFD 2.70V THS = VCC; 4.20V VPFD 4.50V Figure 2. 28-pin SOIC Package COUNTERS FOR TENTHS/HUNDREDTHS OF SECONDS, MINUTES, HOURS, DAY, DATE, MONTH, YEAR, and CENTURY.

M68AF127BL : 128Kbit X 8, 55ns, 70ns. x 8 bits SRAM with OUTPUT ENABLE EQUAL CYCLE and ACCESS TIMES: 55ns LOW STANDBY CURRENT LOW VCC DATA RETENTION: 2V TRI-STATE COMMON I/O LOW ACTIVE and STANDBY POWER TABLE OF CONTENTS SUMMARY . 4 Figure 2. Logic Diagram. 4 Figure 6. Block Diagram. 6 Figure 3. SO Connections. 5 Figure 4. DIP Connections. 5 Figure 5. TSOP Connections. 5 Figure 6. Block.

MR18R1626MN1 : Normal RIMM. = MR18R1626MN1 (16M X 18) X4(6/8)pcs RIMM(TM) Module Based on 288Mb M-die, 32s Banks,16K/32ms Ref, 2.5V ;; Density(MB) = 192 ;; Organization = 96Mx18 ;; Component Composition = 288M(1st)x6 ;; Voltage(V) = 2.5 ;; Refresh = 16K/32ms ;; Speed(MHz)/ TRAC(ns) = 300/53.3,356/45,400/45 ;; #of Pin = 184 ;; Production Status = Eol ;; Comments = Ss,ecc.

UT65L168 : Pseudo Low Power SRAM. Org. = 512KX16 ;; Temp. ( J) = -40~85 ;; Voltage = 2.5~3.3 ;; Speed (ns) = 60/70 ;; Icc(Max) (mA) = 20 ;; Isb1(max) (uA) = 50 ;; Package = 48TFBGA.

K4S56163LF : 4M x 16Bit x 4 Banks Mobile SDRAM in 54BOC he K4S56163LF is 268,435,456 bits synchronous high data rate Dynamic RAM organized as 4 x 4,196,304 words by 16 bits, fabricated with SAMSUNG's high performance CMOS technology. Synchronous design allows precise cycle control with the use of system clock and I/O transactions are possible on every clock cycle.

HYS72T64000HP-3.7-A : 240-Pin Registered DDR2 SDRAM Modules The memory array is designed with 256-Mbit Double-Data-Rate-Two (DDR2) Synchronous DRAMs. All control and address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution..

M312L2920BUS-CA0 : 128M X 72 DDR DRAM MODULE, 0.8 ns, DMA184. s: Memory Category: DRAM Chip ; Density: 9663676 kbits ; Number of Words: 128000 k ; Bits per Word: 72 bits ; Package Type: DIMM-184 ; Pins: 184 ; Supply Voltage: 2.5V ; Access Time: 0.8000 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

M48Z256-120PL1 : 256K X 8 NON-VOLATILE SRAM MODULE, 120 ns, DMA32. s: Memory Category: NVRAM, NVSRAM, SRAM Chip ; Density: 2097 kbits ; Number of Words: 256 k ; Bits per Word: 8 bits ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

S-25C010A0H-J8T2UD : 128 X 8 SPI BUS SERIAL EEPROM, PDSO8. s: Density: 1 kbits ; Number of Words: 128 k ; Bits per Word: 8 bits ; Bus Type: Serial ; Production Status: Full Production ; Data Rate: 6 MHz ; Supply Voltage: 5V ; Package Type: HALOGEN FREE AND LEAD FREE, SOP-8, SOP ; Pins: 8 ; Operating Range: Industrial ; Operating Temperature: -40 to 105 C (-40 to 221 F).

 
0-C     D-L     M-R     S-Z