Details, datasheet, quote on part number: S3C72N5
PartS3C72N5
CategoryMicrocontrollers => 4 bit => S3C7(KS57) Series
TitleS3C7(KS57) Series
DescriptionDescription = S3C72N5 ;; ROM(KB) = 8,16 ;; RAM Nibble = 512 ;; I/o Pins = 40 ;; Interrupt (Int/Ext) = 3/3 ;; Timer/counters = BT/WT/8TC ;; Sio = Yes ;; LCD (Seg/Com) = 32/4 ;; ADC (BitxCh) = - ;; PWM(BitxCh) = - ;; Max. OSC.Freq. (MHz) = 6 ;; VDD(V) = 1.8~5.5 ;; Other Features = RC Osc.,subsystem Clock,buzzer Output ;; Package = 80QFP ;; Production Status = Mass Production
CompanySamsung Semiconductor, Inc.
DatasheetDownload S3C72N5 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The S3C72N8/C72N5 single-chip CMOS microcontroller has been designed for high performance using Samsung's newest 4-bit CPU core, SAM47 (Samsung Arrangeable Microcontrollers). With features such as LCD direct drive capability, 8-bit timer/counter, and serial I/O, the S3C72N8/C72N5 offer an excellent design solution for a wide variety of applications that require LCD functions. to 40 pins of the 80-pin QFP package can be dedicated to I/O. Six vectored interrupts provide fast response to internal and external events. In addition, the S3C72N8/C72N5's advanced CMOS technology provides for low power consumption and a wide operating voltage range.

The S3C72N8/C72N5 microcontroller is also available in OTP (One Time Programmable) version, S3P72N8/P72N5. S3P72N8/P72N5 microcontroller has an on-chip 8/16-Kbyte one-time-programmable EPROM instead of masked ROM. The S3P72N8/P72N5 is comparable to S3C72N8/C72N5, both in function and in pin configuration.

FEATURES

Memory 4-bit RAM 8-bit ROM 8-bit ROM (S3C72N5/P72N5) Bit Sequential Carrier Support 16-bit serial data transfer in arbitrary format

Interrupts Three internal vectored interrupts Three external vectored interrupts Two quasi-interrupts

I/O Pins Input only: 8 pins I/O: 24 pins Output: 8 pins sharing with segment driver outputs

LCD Controller/Driver Maximum 16-digit LCD direct drive capability 32 segment, 4 common pins Display modes: Static, 1/2 duty (1/2 bias), 1/3 duty or 1/3 bias), 1/4 duty (1/3 bias)

Two Power-Down Modes Idle mode (only CPU clock stops) Stop mode (main or sub system oscillation stops)

8-Bit Basic Timer Programmable interval timer Watchdog timer

Oscillation Sources Crystal, ceramic, or RC for main system clock Crystal or external oscillator for subsystem clock Main system clock frequency: 4.19 MHz (typical) Subsystem clock frequency: 32.768 kHz CPU clock divider circuit (by or 64)

8-Bit Timer/Counter Programmable 8-bit timer External event counter Arbitrary clock frequency output Serial I/O interface clock generator

Watch Timer Real-time and interval time measurement Four frequency outputs to BUZ pin Clock source generation for LCD

8-Bit Serial I/O Interface 8-bit transmit/receive mode 8-bit receive only mode LSB-first or MSB-first transmission selectable Internal or external clock source

Interrupt Control Block I/O Port 4 I/O Port 5 Internal Interrupts
Instruction Register 4-Bit Accumulator Program Counter Program Status Word Flags

 

Some Part number from the same manufacture Samsung Semiconductor, Inc.
S3C72P9 Description = S3C72P9 ;; ROM(KB) = 16,24,32 ;; RAM Nibble = 1056 ;; I/o Pins = 39 ;; Interrupt (Int/Ext) = 4/4 ;; Timer/counters = BT/WT/8TC/16TC ;; Sio = Yes ;; LCD (Seg/Com) = 56/16 ;; ADC (BitxCh) = - ;; PWM(BitxCh)
S3C7324 Description = S3C7324 Single-chip CMOS Microcontroller ;; ROM(KB) = 4 ;; RAM Nibble = 256 ;; I/o Pins = 32 ;; Interrupt (Int/Ext) = 2/3 ;; Timer/counters = BT/WT/WDT/8T ;; Sio = - ;; LCD (Seg/Com) = 28/4
S3C7335 Description = S3C7335 ;; ROM(KB) = 8,16 ;; RAM Nibble = 512 ;; I/o Pins = 56 ;; Interrupt (Int/Ext) = 4/4 ;; Timer/counters = BT/WT/WDT/8T ;; Sio = Yes ;; LCD (Seg/Com) = 28/4 ;; ADC (BitxCh) = 8x4 ;; PWM(BitxCh)
S3C7414 Description = S3C7414 ;; ROM(KB) = 4 ;; RAM Nibble = 256 ;; I/o Pins = 35 ;; Interrupt (Int/Ext) = 5/3 ;; Timer/counters = BT/WT/WDT/8Tx2 ;; Sio = Yes ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = 8x6 ;; PWM(BitxCh)
S3C7515 Description = S3C7515 ;; ROM(KB) = 16 ;; RAM Nibble = 512 ;; I/o Pins = 55 ;; Interrupt (Int/Ext) = 4/3 ;; Timer/counters = BT/WT/8Tx2 ;; Sio = Yes ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh)
S3C7524 The S3c7524/c7528/c7534/c7538 Single-chip CMOS Microcontroller Has Been Designed For High-performance Using Sam 47
S3C7528 Description = S3C7528 Single-chip CMOS Microcontroller ;; ROM(KB) = 4,8 ;; RAM Nibble = 768 ;; I/o Pins = 35 ;; Interrupt (Int/Ext) = 3/3 ;; Timer/counters = BT/WT/WDT/8Tx2 ;; Sio = - ;; LCD (Seg/Com)
S3C7534 The S3c7524/c7528/c7534/c7538 Single-chip CMOS Microcontroller Has Been Designed For High-performance Using Sam 47
S3C7538 Description = S3C7538 Single-chip CMOS Microcontroller ;; ROM(KB) = 4,8 ;; RAM Nibble = 768 ;; I/o Pins = 23 ;; Interrupt (Int/Ext) = 3/1 ;; Timer/counters = BT/WT/WDT/8Tx2 ;; Sio = - ;; LCD (Seg/Com)
S3C7544 Description = S3C7544 ;; ROM(KB) = 4 ;; RAM Nibble = 512 ;; I/o Pins = 17 ;; Interrupt (Int/Ext) = 2/2 ;; Timer/counters = BT/WDT/8T ;; Sio = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh) = - ;; Max.
S3C7559 Description = S3C7559 ;; ROM(KB) = 32 ;; RAM Nibble = 1024 ;; I/o Pins = 55 ;; Interrupt (Int/Ext) = 4/3 ;; Timer/counters = BT/WT/WDT/8Tx2 ;; Sio = Yes ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh)
S3C7565 Description = S3C7565 ;; ROM(KB) = 16 ;; RAM Nibble = 5120 ;; I/o Pins = 49 ;; Interrupt (Int/Ext) = 5/4 ;; Timer/counters = BT/WT/WDT/8T/16T ;; Sio = Yes ;; LCD (Seg/Com) = 60/16 ;; ADC (BitxCh) = - ;; PWM(BitxCh)
S3C7574 Description = S3C7574 ;; ROM(KB) = 4 ;; RAM Nibble = 288 ;; I/o Pins = 23 ;; Interrupt (Int/Ext) = 2/2 ;; Timer/counters = BT/WT/8TC ;; Sio = - ;; LCD (Seg/Com) = 32/4 ;; ADC (BitxCh) = - ;; PWM(BitxCh)
S3C7C45
S3C7C48
S3C8005 Description = KS88P6232 8-bit Single-chip CMOS Microcontroller (KS88C6216 / KS88C6224/KS88P6232) ;; ROM(KB) = 16/24/32 ;; RAM(bytes) = - ;; I/o Pins = 27 ;; Interrupt (Int/Ext) = 7/3 ;; Timer/counters
S3C802B MCU Products, Custom MCU
S3C8035 Description = KS88P6232 8-bit Single-chip CMOS Microcontroller (KS88C6216 / KS88C6224/KS88P6232) ;; ROM(KB) = 16/24/32 ;; RAM(bytes) = - ;; I/o Pins = 27 ;; Interrupt (Int/Ext) = 7/3 ;; Timer/counters
S3C8075 Description = S3C8075 ;; ROM(KB) = 16 ;; RAM(bytes) = - ;; I/o Pins = 56 ;; Interrupt (Int/Ext) = 5/12 ;; Timer/counters = BT/WDT/8Tx2/16Tx2 ;; Serial Interface = UART(2) ;; LCD (Seg/Com) = - ;; ADC (BitxCh)
S3C8095 Description = S3C8095 ;; ROM(KB) = 16 ;; RAM(bytes) = 272 ;; I/o Pins = 26 ;; Interrupt (Int/Ext) = 5/12 ;; Timer/counters = BT/WDT/8Tx2/16T ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh)
S3C80A4 Description = S3C80A4 The Single-chip CMOS Microcontroller ;; ROM(KB) = 4 ;; RAM(bytes) = 272 ;; I/o Pins = 19 ;; Interrupt (Int/Ext) = 5/8 ;; Timer/counters = BT/WDT/8TX2/16T ;; Serial Interface = - ;; LCD (Seg/Com)
Same catergory

80C54X2 : 80c51 8-bit Microcontroller Family 4k/8k/16k/32k ROM/otp 128b/256b RAM Low Voltage 2.7 to 5.5 v, Low Power, High Speed 30/33 MHZ.

ATTINY15L : RISC->RISC. 8-bit Microcontroller With 1k Bytes Flash. High-performance, Low-power AVR 8-bit Microcontroller Advanced RISC Architecture 90 Powerful Instructions Most Single Clock Cycle Execution x 8 General Purpose Working Registers Fully Static Operation Non-volatile Program and Data Memories 1K Byte In-System Programmable Flash Program Memory Endurance: 1,000 Write/Erase Cycles 64 Bytes EEPROM.

C8051F236 : System On Chip. Mixed-signal 8KB Isp Flash MCU. ANALOG PERIPHERALS Two Comparators - Programmable Hysteresis - Configurable to Generate Interrupts or Reset VDD Monitor and Brown-out Detector ON-CHIP JTAG DEBUG - On-Chip Debug Circuitry Facilitates Full Speed, Non-Intrusive In-System Debug (No Emulator Required!) - Provides Breakpoints, Single Stepping, Watchpoints, Stack Monitor - Inspect/Modify.

LC86104A : Liquid Crystal Display Controller, Driver, On-chip 4 K Bytes ROM And On-chip 168 Byte RAM, 8-bit Single Chip Microcomputer.

LPC2292 : 16/32-bit Arm Microcontrollers; 256 KB Isp/iap Flash With CAN, 10-bit ADC And External Memory Interfacebased on a 16/32 Bit ARM7TDMI-STM Cpu With Real-time Emulation And Embedded Trace Support, Together With 256 Kilobytes (kB) of Embedded High Speed Flash Memory. A 128-bit Wide Memory Interface And a Unique Accelerator Architecture Enable 32-bit Code.

MN101D02F : Microcomputers/controllers.

MSM64162 : 4-Bit MCU With Built-in RC Oscillation Type A/D Converter And LCD Driver.

S3C72I9 : S3C7(KS57) Series. = S3C72I9 Single-chip CMOS Microcontroller ;; ROM(KB) = 32 ;; RAM Nibble = - ;; I/o Pins = 39 ;; Interrupt (Int/Ext) = 4/4 ;; Timer/counters = BT/WT/WDT/8T/16T ;; Sio = Yes ;; LCD (Seg/Com) = 56/16 ;; ADC (BitxCh) = - ;; PWM(BitxCh) = - ;; Max. OSC.Freq. (MHz) = 6 ;; VDD(V) = 1.8~5.5 ;; Other = RC Osc.,subsystem Clock,buzzer Output.

S3P80G7 : S3C8(KS88) Series. = S3P80G7 ;; ROM(KB) = 24,32 ;; RAM(bytes) = 272 ;; I/o Pins = 38 ;; Interrupt (Int/Ext) = 5/16 ;; Timer/counters = BT/8TC/16TC ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh) = 8x1 ;; Max. OSC.Freq. (MHz) = 4 ;; VDD(V) = 1.7~5.0 ;; Other = LVD(1.9V),Carrier Generator ;; Package = 32SOP,42SDIP,44QFP.

SN8P0212P : 8-bit Microcontroller. an 8-bit micro-controller utilized with CMOS technology fabrication and featured with low power consumption and high performance by its unique electronic structure. This chip is designed with the excellent IC structure, including the program memory to 2K/1K-word OTP ROM, 64 bytes of the data memory, one 8-bit T0 basic timer, one 8-bit timer/event counter,.

TMP47C434 : CISC->TMP. CMOS 4-bit Microcontroller.

TMP47P241VM : TLCS-47 Series.

TMS370C352A : 8-bit Microcontroller. CMOS/EEPROM/EPROM Technologies on a Single Device Mask-ROM Devices for High-Volume Production One-Time-Programmable (OTP) EPROM Devices for Low-Volume Production Reprogrammable EPROM Devices for Prototyping Purposes Internal System Memory Configurations On-Chip Program Memory Versions ROM: to 48K Bytes EPROM: to 48K Bytes ROM-less Data.

UPD178076 : 8-bit Single-chip Microcontroller. The 178078, 178096, and 178098 are 8-bit single-chip CMOS microcontrollers containing hardware for digital tuning systems. These microcontrollers employ a 78K/0 series architecture CPU and allow easy access to internal memories at high speed and easy control of peripheral hardware units. The high-speed 78K/0 series instructions are ideal for system.

UPD70F3025A : CISC->uPD. V853tm 32-/16-bit Single-chip Microcontroller. The PD70F3003A and PD70F3025A have a flash memory instead of the internal mask ROM of the PD703003A/ 703004A and PD703025A, respectively. This model is useful for small-scale production of a variety of application sets or early start of production since the program can be written and erased by the user even with the PD70F3003 mounted on the board.

HT46R53A : The HT46R53A/HT46R54A are 8-bit high performance, RISC architecture microcontroller devices specifically designed for A/D applications that interface directly to analog signals, such as those from sensors. The advantages of low power consumption, I/O flexibility, timer functions, oscillator options, multi-channel A/D converter, Pulse Width Modulation.

R5F21132DFP : The R8C/14 is based on the R8C CPU Core and has 1MB of memory space. Maximum operating frequency is 20MHz. A Flash Memory Version is available. Internal Flash Memory is programmable on a single power source. Key : * 8-bit Multifunction Timer with 8-bit prescaler (Timer X and Z): 2 channels * Input Capture/Output Compare Timer (Timer C): 16-bit x 1 channel.

MSP430F247 : 16-bit Ultra-Low-Power Microcontroller, 32KB Flash, 4KB RAM, 12-Bit ADC, 2 USCIs, HW Multiplier The Texas InstrumentsMSP430 family of ultra-low power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended.

 
0-C     D-L     M-R     S-Z