Details, datasheet, quote on part number: S3CC9P9
PartS3CC9P9
CategoryCommunication => Security & Smart Card => Smart Card Controller
DescriptionDescription = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
CompanySamsung Semiconductor, Inc.
DatasheetDownload S3CC9P9 datasheet
  

 

Features, Applications

Semiconductor Flash Memory Product Planning & Applications

Revision No. 0.0 Initial Draft History Draft Date Jan. 0.1 1.On page 18, BSC is moved from bufferRAM Write Protection command register to system configuration register and bufferRAM Write Protection command register is removed. 2. Host Interface & NAND Flash Interface (page / 3.0V Mar. 13 2002

1. Package information is added. 2. Some description is updated. 3. Controller ID register default value is modified. (Page 14) 4. Write Protection NAND Flash commands are changed, and description are updated.(Page 23, 56)

1. Package pin configuration changed.(page9) 2. Software algorithm of detecting NAND Flash type is added. (page : 11 bit of system configuration register is changed from `reserved' to `CE2Ena'.

1. Minimum latency at sync. Read is changed from 3clocks 2. Technical notes are added - Write Protection truth table is updated(page 58) - Write Protection guidance is updated(page 58) - Internal register reset case is updated(page 61) - Pin connection guidance between Host and Eagle (page 61) - Asynchronous Page Read guidance (page 62) 3. DC/AC parameter : 1 release parameter 4. tASC parameter is removed. tAES parameter is added

4. Package dimension information is updated (page63~64) 5. Some descriptions are modified & added 0.5 1. Vcc is available on 1.8V and 2.5V part. 2. Pin J2 is changed from NC to DNU. 3. Fig30(State diagram of NAND Flash Write Protection) is updated.(page ) 4. Internal Register reset case table is updated (page 5. DC parameter is updated for 2.5V part (page 66~67) 6. Erratas and walk-around methods added (page 73~76) 7. Default value of Interrupt Status Register(1442h) is changed from to 8000h, which is not the silicon revision but definition change.(refer to Internal Regitster reset case table) (page 22) 9. Controller ID register value is updated from to 1202h (page 10. AC parameters are updated (page 65~66) tCES, tIACC are added in Sync. Read. tVLWL is removed in Async. Write. tAVA is removed. tCS is added in Async. Write. 1.0 Spec. is finalized Jul. 16 2003


 

Related products with the same datasheet
S3C2500B
S3C2501X
S3C2510A
S3C4510B
S3C4530A
S3C8975
S3C8982
S3C8984
S3C8988
S3C89C5
S3CC9AB
S3CC9C9
Some Part number from the same manufacture Samsung Semiconductor, Inc.
S3CC9PB Description = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
S3CD9BB
S3CI9E0X Description = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
S3CK215 Description = KS32C6100 High Performance 32-bit MCU For Laser Beam Printer & MFP ;; DataBus(Bit) = - ;; I/o Pins = - ;; Interrupt (Int/Ext) = - ;; Timers = - ;; Serial Interface = - ;; Memory Interface
S3CS9P9
S3CS9PB Description = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
S3F380D Samsung S3c380d 16/32-bit Risc Microcontroller is a Cost-effective And High-performance Microcontroller Solution For TV Applications.
S3F441FX Description = KS32C6100 High Performance 32-bit MCU For Laser Beam Printer & MFP ;; DataBus(Bit) = - ;; I/o Pins = - ;; Interrupt (Int/Ext) = - ;; Timers = - ;; Serial Interface = - ;; Memory Interface
S3F49FAX Description = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
S3F8235 Description = S3C8849 The Single-chip 8-bit Microcontroller ;; ROM(KB) = 24,32 ;; RAM(bytes) = 272 ;; I/o Pins = 26 ;; Interrupt (Int/Ext) = 5/4 ;; Timer/counters = BT/WDT/8Tx2 ;; Serial Interface = - ;; LCD (Seg/Com)
S3F8647 Description = S3F8647 ;; ROM(KB) = 16,24 ;; RAM(bytes) = 384 ;; I/o Pins = 19 ;; Interrupt (Int/Ext) = 6/3 ;; Timer/counters = BT/8TC/8T/12C ;; Serial Interface = Iic ;; LCD (Seg/Com) = - ;; ADC (BitxCh)
S3F865B
S3F880A Description = S3F8647 ;; ROM(KB) = 16,24 ;; RAM(bytes) = 384 ;; I/o Pins = 19 ;; Interrupt (Int/Ext) = 6/3 ;; Timer/counters = BT/8TC/8T/12C ;; Serial Interface = Iic ;; LCD (Seg/Com) = - ;; ADC (BitxCh)
S3F9444 Description = S3F9444 ;; ROM(KB) = 4 ;; RAM(bytes) = 208 ;; I/o Pins = 6 ;; Interrupt (Int/Ext) = 1/2 ;; Timer/counters = BT/8TC ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = 10x3 ;; PWM(BitxCh)
S3F9454 Description = S3F9454 ;; ROM(KB) = 4 ;; RAM(bytes) = 208 ;; I/o Pins = 18 ;; Interrupt (Int/Ext) = 2/2 ;; Timer/counters = BT/8TC ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = 10x9 ;; PWM(BitxCh)
S3FB018 The S3cb018/fb018 Single-chip CMOS Microcontroller
S3FB42FX Description = S3FB42FX 8-BIT CMOS Microcontroller ;; Function = Multi-format Decoder+mcu ;; Features = Ecp,usb,uart,sio,iic,iis,ssfdc I/f,random Number Generator,adc,multi-codec(mpeg 1/2/2.5 Layer 3 Decoder,mpeg
S3FB42FX01
S3FB519 Description = KS32C6100 High Performance 32-bit MCU For Laser Beam Printer & MFP ;; DataBus(Bit) = - ;; I/o Pins = - ;; Interrupt (Int/Ext) = - ;; Timers = - ;; Serial Interface = - ;; Memory Interface
S3FS9QB Description = S3C2500A ;; Function = ARM940T 166MHz,2 Ethernet Mac USB,HDLC,UART,IIC,DES/3DES ;; Package = 272PBGA ;; Production Status = Mass Production ;; Rtos Support = V,l,n ;; User's Manual = Now
S3P7048 Description = S3P7048 General Purpose 4 Bit Microcontroller ;; ROM(KB) = 4,8 ;; RAM Nibble = 512 ;; I/o Pins = 36 ;; Interrupt (Int/Ext) = 4/3 ;; Timer/counters = BT/WT/8Tx2 ;; Sio = Yes ;; LCD (Seg/Com)
 
0-C     D-L     M-R     S-Z