|Category||Power Management => Voltage References|
|Description||1.225V Micropower Shunt Voltage Reference|
|Company||ST Microelectronics, Inc.|
|Datasheet||Download TS4041-1.2 datasheet
0.5% s HIGH STABILITY WHEN USED WITH CAPACITIVE LOADS s INDUSTRIAL TEMPERATURE RANGE: s 150ppm/°C MAXIMUM TEMPERATURE COEFFICIENT DESCRIPTION The is a low power shunt voltage reference providing a stable 1.225V output voltage over the industrial temperature range to +85°C). Availabe in SOT23-3 surface mount package, it can be designed in applications where space saving is a critical issue. The low operating current is a key advantage for power restricted designs. In addition, the TS4041 is very stable and can be used in a broad range of application conditions. APPLICATIONComputers Instrumentation Battery chargers Switch Mode Power Supply Battery operated equipments
= TO92 Plastic package - also available in Bulk (Z), Tape & Reel (ZT) and Ammo Pack (AP) LT = Tiny Package (SOT23-3) - only available in Tape & Reel (LT)Symbol If Pd Tstd ESD Tlead Parameter Reverse Breakdown Current Forward Current Power Dissipation
Storage Temperature Human Body Model (HBM) Machine Model (MM) Lead Temperature (soldering, 10 seconds)
1. Pd has been calculated with T amb = 25°C and = 150°C and Rthja = 200°C/W for the TO92 package Rthja = 340°C/W for the SOT23-3L package
Symbol Imin Imax Toper Minimum Operating Current Maximum Operating Current Operating Free Air Temperature Range Parameter Value to +85 Unit mA °CELECTRICAL CHARACTERISTICS TS4041E (2% Precision) Tamb = 25°C (unless otherwise specified)
= 100µA Reverse Breakdown Voltage Tolerance -40°C < Tamb < +85°C Minimum Operating Current Tamb -40°C < Tamb = 100µA Ikmin -40°C < Tamb -40°C < Tamb < 10kHz
Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise
Note : Limits are 100% production tested at 25°C. Limits over temperature are guaranteed through correlation and by design.ELECTRICAL CHARACTERISTICS TS4041D (1% Precision) Tamb = 25°C (unless otherwise specified)
= 100µA Reverse Breakdown Voltage Tolerange -40°C < Tamb < +85°C Minimum Operating Current Tamb -40°C < Tamb = 100µA Ikmin -40°C < Tamb -40°C < Tamb < 10kHzELECTRICAL CHARACTERISTICS TS4041C (0.5% Precision)Tamb = 25°C (unless otherwise specified)
= 100µA Reverse Breakdown Voltage Tolerange -40°C < Tamb < +85°C Minimum Operating Current Tamb -40°C < Tamb = 100µA Ikmin -40°C < Tamb -40°C < Tamb < 10kHz
|Some Part number from the same manufacture ST Microelectronics, Inc.|
|TS4041CILT-1.2 1.225V Micropower Shunt Voltage Reference|
|TS419 360MW Mono Audio Amplifier With Standby Active High|
|TS419-2 360mw Mono Amplifier With Standby Mode|
|TS419ID 360MW Mono Audio Amplifier With Standby Active High|
|TS420 4A SCRS|
|TS420-600H-TR 4a SCRS|
|TS420-600T 4A SCRS|
|TS420-600T-TR 4a SCRS|
|TS420-700 4A SCRS|
|TS420-700B-TR 4a SCRS|
|TS420-700H 4A SCRS|
|TS420-700H-TR 4a SCRS|
|TS420-700T 4A SCRS|
|TS420-700T-TR 4a SCRS|
|TS420-B/T Sensitive SCR|
|TS420-x00B 4A SCRS|
EMIF10-COM01 : IPAD (Integrated Passive and Active Discretes)->IP Emi Filter Including Esd Protection
M27C4001-45L1TR : 4 Mbit 512kb X 8 uv EPROM And OTP EPROM
STM806SDS6E : 3V Supervisor with Battery Switchover
M48T35-70PM1E : 5V, 256 Kbit (32 Kb x 8) Timekeeper SRAM
T1635H-6G : High Temperature 16 A Triacs
STTS424E02BDN3E : Memory Module Temperature Sensor with a 2 Kb SPD Eeprom
BZW04-37BHE3/54 : 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-15 Specifications: Configuration: Single ; Direction: Bidirectional ; Package: PLASTIC PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 34.2 volts ; RoHS Compliant: RoHS
LDK220M40R : LDO Voltage Regulators 200 mA low quiescent current and low noise LDO STMicroelectronics LDK220 Low Drop Voltage Regulators provide a maximum output current of 200mA from an input supply voltage in the range of 2.5V to 13.2V with a typical dropout voltage of 100mV. It is stabilized with a ceramic capacitor on the output. An enable logic control function puts
AD2710 : 5.0V. ± 10.000 Volt Ultrahigh Precision Reference Series.
ADR293ER : Low Noise Micropower Precision Voltage Reference. Voltage Output 15 V Supply Range Supply Current 15 A Max Initial Accuracy 3 mV Max Temperature Coefficient 8 ppm/ C Max Low Noise 15 V pp Typ to 10 Hz) High Output Current 5 mA Min Temperature Range C REF02/REF19x Pinout APPLICATIONS Portable Instrumentation Precision Reference for 5 V Systems A/D and D/A Converter Reference Solar Powered Applications.
HIP4011IS : Three Phase Brushless DC Motor Controller. The HIP4011 motor driver is intended for three phase Brushless motor control at continuous output currents to 3A. It 16V Max. Rated Supply Voltage accepts inputs from buffered Hall effect sensors and drives [ /Title (HIP4011) three motor windings, regulating the current through an Built-in "Free-Wheeling" Diodes /Subject (Three Phase Brushless DC Motor.
LTC1314 : Flash Memory VPP Switches. LTC1314, Single Pcmcia Switching Matrix With Built-in N-Ch. VCC Switch Drivers.
MC78L15A : 3-Terminal 0.1A Postive Voltage Regulator. Maximum Output Current of 100mA Output Voltage 15V, 18V and 24V Thermal Overload Protection Short Circuit Current Limiting Output Voltage Offered in ±5% Tolerance The MC78LXXA/LM78LXXA/MC78L05AA series of fixed voltage monolithic integrated circuit voltage regulators are suitable for application that required supply current to 100mA. Parameter Input.
MTSS8040 : Slotted Switch.
REG101-25 : . q NEW DMOS TOPOLOGY: Ultra Low Dropout Voltage: 60mV typ at 100mA Output capacitor NOT required for stability q FAST TRANSIENT RESPONSE q VERY LOW NOISE: 23µVrms q HIGH ACCURACY: ±1.5% max q HIGH EFFICIENCY: IGND 500µA at IOUT = 100mA Not Enabled: IGND 3.3V, 5.0V, AND ADJUSTABLE OUTPUT VERSIONS q OTHER OUTPUT VOLTAGES AVAILABLE UPON REQUEST q FOLDBACK.
S7133AM : Voltage Detector. As Control Circuit of Battery-Backed Memory As Measure Against Erroneous Operations at Power On-Off As Resetting Function for the CPU-Mounted Equipment PC, Printer, VTR, Fax, C-TV etc. As Measure Against System Runaway at Instantaneous Break of Power Supply etc. Current Consumption is Low (ICCL=300 Typ. ICCH=30 Typ.) Resetting Output Minimum Guarantee.
TA8742N : av Switch.
TDA3673 : LDO. TDA3673; Very Low Dropout Voltage/quiescent Current 3.3 V Voltage Regulator With Enable.
LM3495 : Current mode buck controller The LM3495 is a PWM buck regulator which implements a unique emulated peak current mode control. This control method eliminates the switching noise which typically limits current mode operation at extremely short duty cycles and high operating frequency. The switching frequency is programmable between 200 kHz and 1.5 MHz,.
TPS61202 : The TPS6120x devices provide a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. It is also used in fuel cell or solar cell powered devices where the capability of handling low input voltages is essential. Possible output currents are depending.
MCP1603 : Step-down DC/DC Controller The MCP1603 is a high efficiency fully integrated 500 mA 2.0 MHz synchronous buck regulator ideally suited for Li-Ion/NiMH Battery powered application powered.
ISL59832 : Dual Channel, Single Supply Video Reconstruction Filter With Charge Pump The ISL59832 is a dual channel, single supply video driver with reconstruction filter and charge pump. It is designed to drive SDTV displays with S-Video (Y/C) signals. It operates on a single supply (3.0V to 3.6V) and generates its own negative supply (-1.5V) using a regulated.
L4949E : Voltage Regulators Datasheet Multifunction very low drop voltage regulator.
TPS72728 : 200mA, Ultralow IQ, Fast Transient Response, RF Low-Droput Linear Regular The TPS727xx family of low-dropout (LDO) linear regulators are ultralow quiescent current LDOs with excellent line and ultra-fast load transient performance and are designed for power-sensitive applications. The LDO output voltage level is preset by the use of innovative factory.
LTC6801 : Independent Multicell Battery Stack Fault Monitor The LTC®6801 is a multicell battery monitoring IC incorporating a 12-bit ADC, a precision independent voltage reference, sampled comparator, and a high voltage input multiplexer. The LTC6801 can monitor as many as 12 series connected battery cells for overvoltage, undervoltage, and overtemperature conditions,.
TPS657051 : 3-Channel Power Management IC TPS657051/52 are small power management units targeted for embedded camera module or other portable low power consumer end equipments. It contains two high efficient step down converters, a low dropout linear regulator and additional supporting functions. The 2.25MHz step-down converter enters a low power mode at light.
ISL78322 : Dual 2A/1.7A Low Quiescent Current 2.25MHz High Efficiency Synchronous Buck Regulator The ISL78322 is a high efficiency, dual synchronous step-down DC/DC regulator that can deliver up to 2A/1.7A continuous output current per channel. The channels are 180Â° out-of-phase for input RMS current and EMI reduction. The supply voltage range of 2.8V to 5.5V.